D-Link's 24-port Third Generation Smart Switch is part of D-Link's third generation of Web Smart Switches, designed to provide Small to Medium Businesses complete control over their network. In a 19" metal case with innovative fanless design, the switch incorporates a complete lineup of Layer 2 features, including Port Mirroring, Spanning Tree, Link Aggregation & IGMP Snooping. Network maintenance features include Loopback Detection & Cable Diagnostics. The DES-1210-28 features state-of-the-art security technologies including ACL filtering & IP-MAC-Port Binding. With D-Link Safeguard Engine, the switch remains available in the event of a virus outbreak. Furthermore, the DES-1210-28 uses Auto Voice VLAN, ensuring higher priority for voice traffic. Quality of Service (Qo S) & granular bandwidth control down to 64 kbps are also included. A characteristic of D-Link's web Smart Switches is their ease of use, via a simple web browser. Advanced users can also configure the switch via Telnet or SNMP package such as D-Link's D-View 6.0. D-Link's Smart Console utility is also included for the joint management of several switches. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. ...

The DES-1210-28P is the first Po E switch in the Fast Ethernet Smart III series. Equipped with 24 Fast Ethernet ports, 2 Gigabit ports & 2 additional Gigabit copper/fiber combo ports, this switch integrates the features of the successful Smart III series with Po E & the Po E+ functionality. With an easy to use web interface & eco-friendly design, the DES-1210-28P helps customers to quickly & easily deploy their networks, saving energy & money. The DES-1210-28P is the ideal solution as an advanced edge switch for SMB & enterprise networks. The 4 additional Gigabit ports allow for fast & reliable copper or fiber uplinks to the restof the infrastructure. The Asymmetric VLAN support will provide access to shared resources such as servers or the Internet, without complicated VLAN configurations. in addition, the innovative Auto Voice VLAN feature allows for easy integration of 3rd party IP phones, placing Vo IP traffic in a separate VLAN, thus ensuring the quality & security of Vo IP traffic. The DES-1210-28P complies with the 802.3af Po E standard, & the recently ratified, high-power 802.3at standard. This gives you extra flexibility at deploying appliances such as wireless Access Points, IP cameras & Vo IP phones in your network, even in mix-vendor environments. For added flexibility & power-saving, the DES-1210-28P integrates the Time-Based Po E feature, which turns off the power when it is not needed, for example, at nights or during the weekends. This means that Po E-powered devices which otherwise would be always on, can be switched off centrally, saving power & money. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

D-Link's 48-port Third Generation Smart Switch is part of D-Link's third generation of Web Smart Switches, designed to provide Small to Medium Businesses complete control over their network. In a 19" metal case with innovative fanless design, the switch incorporates a complete lineup of Layer 2 features, including Port Mirroring, Spanning Tree, Link Aggregation & IGMP Snooping. Network maintenance features include Loopback Detection & Cable Diagnostics. The DES-1210-52 features state-of-the-art security technologies including ACL filtering & IP-MAC-Port Binding. With D-Link Safeguard Engine, the switch remains available in the event of a virus outbreak. Furthermore, the DES-1210-52 uses Auto Voice VLAN, ensuring higher priority for voice traffic. Quality of Service (Qo S) & granular bandwidth control down to 64 kbps are also included.A characteristic of D-Link's web Smart Switches is their ease of use, via a simple web browser. Advanced users can also configure the switch via Telnet or SNMP package such as D-Link's D-View 6.0. D-Link's Smart Console utility is also included for the joint management of several switches. ...

D-Links DFE-530TX Fast Ethernet adapter is a high-performance auto-sensing 10/100 Mbps dual-speed adapter for the PCI bus. The adapter operates in the 32-bit Bus Master mode, delivering throughputs at multi-megabits per second with little stress on hosts CPU. Network administrators can install optional boot ROMs on the adapters to implement network security. Diskless workstations equipped with these ROMs can remote boot from Net Ware or Windows NT servers & access authorized data. The adapter supports all major network operating systems, including Net Ware, Windows & Linux. ...

The DGS-3100-24 switch

Includes:: 2 dedicated HDMI stacking ports, each providing 5 Gbps stacking bandwidth.

...

The DGS-1005D (Green Ethernet version) is a 5-port unmanaged Gigabit switch that consumes less energy than conventional switches of the same

Specification. This switch reacts when a device attached to it is turned off, by placing the corresponding port in a standby mode that requires less power. In addition, the switch is able to detect the Ethernet cable length & adjust power usage accordingly, hence saving any surplus power that would otherwise dissipate as heat. These two features combined can save up to 27% of the power used by the switch. This function allows the flow of data to be adjusted between switch & server, to ensure a reliable data transfer. At 2000 Mbps full duplex, the switch provides high-speed data pipes to your servers with minimum data transfer loss. All ports support auto-negotiation of MDI/MDIX cross over. This eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, a hub or a switch, using the usual straight-through twisted-pair cable.

...

Also available in 8-port version
- click here. Think Green D-Link takes the lead in networking industry to release Green Ethernet
...

The DGS-1008D (Green Ethernet version) is an 8-port unmanaged Gigabit switch that consumes less energy than conventional switches of the same

Specification. The DGS-1008D (Green Ethernet version) reacts when a device attached to it is turned off, by placing the corresponding port in a standby mode that requires less power. In addition, the switch is able to detect the Ethernet cable length & adjust power usage accordingly; hence saving any surplus power that would otherwise dissipate as heat. All ports support auto-negotiation of MDI/MDIX cross over. This eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, a hub or a switch, using the usual straight-through twisted-pair cable.

...

Also available in 5-port version
- click here. Think Green D-Link takes the lead in networking industry to release Green Ethernet
...

The DGS-1008P offers an economical way for SOHO & small to medium businesses (SMB) to benefit from the increased bandwidth of Gigabit Ethernet. It provides 8 Gigabit ports for fast server deployment to meet increasing network loads. The Gigabit Po E ports provide a larger bandwidth for high speed network applications, especially IEEE802.11n Access Points, high resolution video cameras, & phones. Gigabit Connection for Home The D-Link DGS-1008P 8-Port Gigabit Po E Unmanaged Desktop Switch enables home & office users to easily connect & supply power to Power over Ethernet (Po E) devices such as wireless access points (APs), IP cameras, & IP phones. It also provides the opportunity to add additional Ethernet devices like computers, printers, & Network Attached Storage (NAS) onto a network. This compact Po E switch operates quietly, making it ideal to be used in virtually any room or office. Power Over Ethernet (Po E) The first four ports of the DGS-1008P support the IEEE 802.3af Po E protocol. Each of these four ports can supply up to 15.4 watts, for a total Po E budget of 52 watts, allowing users to attach an IEEE 802.3af-compliant device to the DGS-1008P that requires no additional power. Use Po E for applications that are far from power outlets or when you want to minimize the clutter of extra cables. Auto MDI/MDIX Crossover All ports support automatic MDI/MDIX crossover, eliminating the need for crossover cables or uplink ports. Each port can be plugged directly to a server, hub, router, or switch using regular straight-through twisted-pair Ethernet cables. Conserve Energy The DGS-1008P makes use of D-Link Green™ eco-friendly technology, providing energy savings, reduced power consumption, & a longer product life without sacrificing operational performance or functionality. This switch helps to conserve energy through methods such as Link Status & Cable Length Detection. The Link Status feature automatically powers down ports that have no link, allowing the switch to save substantial amounts of energy by cutting power for unused ports or ports connected to computers that have been shut down. It can also detect connected cable lengths, & adjust power usage accordingly, helping you save energy without affecting networking performance. In addition, the fan-less design extends the product’s life & also reduces noise. ...