Keep an eye on your property wherever you happen to be, thanks to this pack of four DCS-942L cameras with night vision. All of these wireless-N network cameras work with the mydlink application for on-the-go viewing. Simply log onto the mydlink website & select your camera to start viewing. The D-Link DCS-942L cameras are accessible via your computer using a web browser, your media tablet, your Android smartphone or iPhone (free application required). Pack of four cameras. Computing Wireless network IP cameras. ...

The D-Link's DEM-211 SFP transceiver provides a high performance solution for serial optical data communication applications. It is hot swappable, Small Form Factor Pluggable (SFP) compliant with the Multi-Source Agreement (MSA)

Specification. The transceiver has duplex LC connectors & provides IEEE 802.3u compliant link for up to 100 Mbps in the half duplex mode (or 200 Mbps full-duplex mode) transmission for fiber cable applications.D-Link's highly integrated transceiver offers low jitter performance for extended optical links support without performance degradation. This high performance enables reliable data transfer in short-, intermediate- & long-distances for building, factory, campus & metropolitan networking applications.

...

D-Link's 10 G SFP+ module series are hot-swappable SFP+ transceivers that plug into SFP+ slots on switches & support 10 G Ethernet. The D-Link 10 G Base SFP+ module series transceivers offer customers a wide variety of 10 G Ethernet connectivity options for data centers, enterprise wiring closets, & service provider transport applications. The transceivers use the Enhanced Small Formfactor Pluggable format (SFP+). The SFP+ form factor is smaller than other form factors such as Xenpak, X2, & 10 G XFP, ensuring lower costs, lower power disruption, & higher port density. They provide the necessary signal amplification for data to be transmitted to the network cable from the port, & vice versa, for the port to receive data from the network cable. All D-Link transceivers are hot-pluggable. You can connect a transceiver while the system is powered on without causing any problems. This permits modules to be added or removed without interrupting the network. The transceivers all support 10 G Ethernet, which results in very fast data transmissions of up to 10 Gbit/s. This is 10 times faster than Gigabit Ethernet & enables the switch to handle faster & higher data transmissions, making it very suitable for business needs. ...

D-Link’s new line of Gigabit Interface Converters (GBICs) & Small Form-Factor Pluggables (SFPs) transceivers represent an industry leading combination of performance & affordability. D-Link’s new Gigabit transceivers are available in two form-factors: standard (GBIC) or (SFP)/mini-GBIC. The DEM-310GT is a high performance 1310nm multimode/ Singlemode SFP (mini-GBIC) transceiver. Supporting full duplex, Gigabit speeds on multimode/ Singlemode fiber for distances of up to 550m/550m/10km on 62.5µm/50µm/9µm respectively. The unit features a metal housing to reduce EMI & to increase durability. The DEM-310GT is hot pluggable & is backed by a standard 2-year product warranty & free technical support. Specifications 1000 Base-LX port (IEEE 802.3z standard) Duplex LC connector Full duplex operation 802.3x flow control support Fibre type: 9um single-mode fibre, up to 10 km. Wavelenght: 1310 nm Power support: 3.3 V Power budget: 10.5 d B Hot pluggable Class 1 laser product (complies with EN60825-1) TTL signal detect indicator Metal enclosure for lower EMI ...

D-Link’s new line of Gigabit Interface Converters (GBICs) & Small Form-Factor Pluggables (SFPs) transceivers represent an industry leading combination of performance & affordability. D-Link’s new Gigabit transceivers are available in two form-factors: standard (GBIC) or (SFP)/mini-GBIC. The DEM-311GT is a high performance 850nm multimode SFP/mini-GBIC transceiver. Supporting full duplex, Gigabit speeds on multimode fiber for distances of up to 220m/550m on 62.5µm/50µm fiber respectively. The unit features a metal housing to reduce EMI & to increase durability. The DEM-311GT is hot pluggable & is backed by a standard 2-year product warranty & free technical support. * Third-Party Devices Must Comply With specified Supported Industry-Standard Specifications Product/ Performance Specifications Optical Receiver Sensitivity:-18d Bm (max) Interface Options Connector Type
- LC Operational Ranges Support Voltage
- 3.1-3.5V Max Voltage
- 6.0V Max Current
- 300m A Safety Certifications & Environmental Information Class 1 Laser
- EN 60825-1 FDA 21
- 1040.10 & 1040.11 Physical Specifications

Dimensions (Wx Dx H)
- 13.8 x 57.2 x 8.5 mm Warranty & Support Information Warranty
- 2 Year Warranty Support
- Free Technical Support










...

All ports support auto-negotiation of MDI/MDIX cross over. This eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, a hub or a switch, using the usual straight-through twisted-pair cable. With 24 plug-&-play ports, the switch is a perfect choice for workgroups to upgrade performance in a client/server environment. The ports can be connected to servers in full-duplex, or hubs in half-duplex. With low-cost connection per-port, the switch can be set up for direct connection from the PCs. This relieves data bottleneck by giving each workstation a dedicated bandwidth on the network. The DES-1024D is an unmanaged 10/100 Mbps switch designed to enhance workgroup performance while providing a high level of flexibility. Powerful yet easy to use, this device allows users to simply plug any port to either a 10 Mbps or 100 Mbps network to multiply bandwidths, boost response time & satisfy heavy load demands. The switch comes with 24 10/100 Mbps ports, allowing a small workgroup to flexibly integrate to Ethernet & Fast Ethernet. These intelligent ports detect the network speed & auto-negotiate between 100BASE-TX & 10BASE-T, as well as between full & half-duplex. All ports support flow control. This function minimizes dropped packets by sending out collision signals when the port's receiving buffer is full. Features 24 10/100 Mbps ports Full/half duplex support for each port MDI uplink port for easy expansion Auto-learning of network configuration Flow control in full duplex mode for protection against data loss Back pressure in half duplex mode RAM buffer dynamically allocated for each port Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

This switch provides 24 10/100 Mbps ports to connect to 24 workstations & servers. All ports auto-sense the network speed of the computers & hubs to run at either 10 Mbps or 100 Mbps. All ports auto-negotiate between full & half duplex, flow control, & MDI/MDIX twisted-pair cross over. This switch provides an open slot for you to install 2 optional Fast Ethernet fiber ports to attach to 2 servers or cascading switches over the 2 km long reliable fiber cables. Expansion is easy through any twisted-pair port. You cascade several switches together through this port to get more ports. IEEE 802.3x Flow Control allows your servers to directly connect to this switch for fast, reliable data transfer. At 200 Mbps full duplex, this switch provides high-speed data pipes to your servers with minimum data transfer loss. Auto-negotiation of MDI/MDIX cross over eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, workstation, or hub using the usual straight through twisted-pair cable. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The DES-1100 Easy Smart series is the ideal entry-level solution for managed networks. Equipped with 16 or 24 Fast Ethernet ports, the DES-1100 series integrates basic configurable options that provide performance & scalability. With an easy to use web interface, these switches help customers to quickly & easily deploy their networks. Their fanless design makes them completely silent & very reliable, & their eco-friendly technology saves energy & money. The basic lineup of L2 features in the Easy Smart series makes them very suitable for SMB with small IT teams, without sacrificing on performance & security. Network downtime is reduced drastically with loopback detection & broadcast storm control. Security & confidentiality of network traffic is guaranteed with VLANs. Ample bandwidth on the uplinks to the rest of the network can be achieved with Link Aggregation, & the Cable Diagnostics function provides an easy & convenient way to quickly detect & troubleshoot cabling problems. Management is through an intuitive web interface or a PC-based Smart Console Utility. Both provide a convenient & easy way of configuring the switches, allowing for effective network deployments. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

This product is customized for use in the UK & Irel&. What it does? The DES-1005D 5-port Desktop Switch means that you can easily connect any Ethernet-enabled device, thus extending your home network. No configuration is required, making this switch completely plug-&-play. Each of the 5 intelligent ports detects the network speed & auto-negotiate between 100BASE-TX & 10BASE-T, as well as between full- & half-duplex. Each supports auto-negotiation of MDI/MDIX cross over, eliminating the need for cross-over cables or uplink ports. ...

The DES-1008D is an unmanaged 10/100 Mbps switch designed to enhance small workgroup performance while providing a high level of flexibility. The switch comes with 8 10/100 Mbps ports, allowing a small workgroup to flexibly connect to Ethernet & Fast Ethernet & integrate. These intelligent ports detect the network speed & auto-negotiate between 100BASE-TX & 10BASE-T, as well as between full- & half-duplex. All ports support 802.3x flow control. This function minimizes dropped packets by sending out collision signals when the port's receiving buffer is full. Flow control is available in the full-duplex mode. All ports support auto-negotiation of MDI/MDIX cross over. This eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, a hub or a switch, using the usual straight-through twisted-pair cable. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. ...