This 1-meter Cat 6 cable meets or exceeds all Category 6 cable specifications to ensure reliable Gigabit network connections. & the cable is shielded to protect your network against electromagnetic interference (EMI/RFI) & system noise to provide the perfect solution for fast & safe network connections. Reliable Cat 6 Gigabit connections Constructed with 100% copper & foil shielded twisted-pair wiring, this cable was built for quality performance. The cable is designed to protect the data traveling through your network & is perfect in environments with a large amount of EMI. The results are faster speeds & enhanced data transmission. The 50-micron gold connectors deliver optimum conductivity & eliminate signal loss due to oxidation or corrosion. Secured network connections For easier cable runs, the snagless connectors protect the RJ45 clips during installation, making them less prone to snagging or breaking. This ensures a sturdy connection by preventing the cable from becoming loose from the plug. Plus, the moulded boots offer strain relief that stops the RJ45 connector termination points from bending at sharp angles, which reduces the risk of damage to the cable that could decrease network performance. ...

Belkins CAT 6 PVC Solid UTP Bulk Cable is used to connect a network outlet with a patch panel. This cable consists of 8 stranded 24 AWG wires, & is suitable for 10/100/1000BASE-T networks, & 10GBASE-T networks (up to 50 meters). • CAT 6 High Performance UTP Solid Cable • Standards Compliance: ISO/IEC 11801; TIA/EIA-568-B.2-1 • Conductor

Size: 24AWG x 4pairs • Conductor Construction: Solid Bare Copper • Insulation

Material: FRPE • Jacket Diameter: 6.80±0.20mm • Jacket

Material: PVC • Rating: 75°C, 300V • Conductor Resistance: 93.8& Omega;/km/20°C max • Mutual Capacitance: 56p F/m max • Dielectric Strength: AC 1.5k V/min • Spark Test: 2.5k V • Flame Retardant Test: CMR • Characteristic Impedence: 100±15& Omega; @ 1 ~ 550 M Hz • Structural Return Loss: 8.6d B min at 550 M Hz • Propagation Delay: 536n S/100m max @ 550 M Hz • Category 6 performance rated for any 10 Base-T, 100 Base-T, & 1000 Base-T Network • Separator design provides extra cross-talk immunity • White conductor has color band for easy pair identification General • Network Cable Type: Bulk cable
- CAT 6 • Technology: Unshielded twisted pair (UTP) • American Wire Gauge (AWG): 24 • Wires per Cable: 8 wire (s) • Pairs per Cable: 4 pair (s) • Impedance: 100 Ohm •
Features: Solid • Length: 1000 ft •
Colour: Black








...

The NET6 faceplates are designed to cater for high quality, high speed data rates achievable through ratified Cat.6 standards. They are now available in both standard & angled versions.

Features: Made in the UK using high performance AMP jacks & standard IDC blocks PCB design with individual colour coded labels & cable saddles Available in both standard & angled versions ideal to be used with Gigabit Ethernet & beyond

...

Belkins 10G CAT6a snagless patch cord, built & tested to exceed 500MHZ, is 10 times faster than CAT6 & 100 times faster than CAT5e cables. Our patch cords are individually tested & comes with test results in every bag. When used with Belkins CAT6a patch panels, keystone jacks, & bulk cable, our CAT6a snagless patch cords enable 10 G Base-T performance in data center applications. • Gold-plated connector contacts deliver maximum conductivity for high-speed data transmissions • Molded snagless guards make installations effortless & protect connector tabs from damage • Individually tested with results in every bag • Performance tested to exceed 500 M Hz • Completely backwards compatible with existing CAT5e & Cat 6 network applications • Conductor Construction Stranded Copper • Conductor Size 26AWG x 4 pairs • Dielectric Strength AC 1.75k V/0.15sec • Flame Retardant Test CM • Insulation Material HDPE • Jacket Material PVC • Mutual Capacitance 5.6 n F/100m nom. • Propagation Delay 45n S/100m max @ 500 M Hz • Jacket Diameter 6.2±0.3mm ...

The Cisco Catalyst 2960-Plus Series Switches are fixed-configuration Fast Ethernet switches (Figure 1) that provide enterprise-class Layer 2 switching for branch offices, conventional workspaces, & infrastructure applications. They enable reliable & secure operations with lower total cost of ownership through a range of Cisco IOS software features, including Cisco Catalyst Smart Operations. Product Highlights Cisco Catalyst 2960-Plus switches feature: • 24 or 48 Fast Ethernet ports • Small Form-Factor Pluggable (SFP) & 1000BASE-T Gigabit Ethernet uplinks • IEEE 802.3af-compliant Power over Ethernet (Po E) • LAN Base or LAN Lite Cisco IOS Software feature set • Smart Operations tools that simplify deployment & reduce the cost of network administration • Cisco Energy Wise technology to manage energy consumed by connected devices • An enhanced limited lifetime hardware warranty (E-LLW), providing next-business-day replacement Applications & Benefits The Cisco Catalyst 2960-Plus Series provides cost-effective, enterprise class Ethernet switching for: • Branch offices, remote sites, & retail locations • Conventional desktop workspaces • Building infrastructure, physical security, & other nontraditional access applications Benefits of the 2960-Plus include: • Robust quality of service (Qo S) that prioritizes voice & critical business applications • Flexible security features that can limit access to the network & mitigate threats • Tools that reduce total cost of ownership through simplified operations & automation Tech Spec:- 10/100 Ethernet Interfaces
- 24 Uplink Interfaces
- 2 (SFP or 1000BASE-T) Cisco IOS Software Feature Set
- LAN Base Available Po E Power
- 370W Maximum Number of Po E (IEEE 802.3af) Ports 24 ports up to 15.4W Available Po E Power
- 370W Forwarding Rate: 64-Byte L3 Packets, Millions of packets per second
- 6.5 Dementions
- 1.73 x 17.70 x 13.07 Inchs
- 4.4 x 45.0 x 33.2 CM MTBF in thousands of hours
- 382








...

The Cisco Catalyst 3560X Series Switches are an enterprise-class line of standalone switches. These switches provide high availability, scalability, security, energy efficiency, & ease of operation with features such as Cisco Stack Power, IEEE 802.3at Power over Ethernet Plus (Po E+) configurations. The Cisco Catalyst 3560X Series enhance productivity by enabling applications such as IP telephony, wireless, & video for borderless network experience. ...

The Cisco Catalyst 4500E Supervisor Engine 7L-E (Figure 1) is an enterprise-class borderless campus access & price/performance aggregation supervisor engine designed to provide 520 Gbps per system with E-Series chassis. The Cisco Catalyst 4500E Supervisor Engine 7L-E builds on the success of its predecessor, the Cisco Catalyst 4500E Supervisor Engine 6L-E, & provides unprecedented performance with borderless services such as Flexible Net Flow (FNF) & hosted third-party applications. The Supervisor Engine 7L-E offers key innovations including • Up to 7 to 10 years of investment protection through backward & forward compatibility • 520-Gbps system performance with 48 Gbps per slot to every line-card slot • Future-proof investment with dual 10 Gigabit Ethernet uplinks (Small Form-Factor Pluggable Plus [SFP+] optics) or four Gigabit Ethernet uplinks (SFP optics) • Cisco Universal Power over Ethernet (UPOE) for unprecedented convergence to IP network infrastructure • Application visibility through FNF • Cisco IOS XE Software, which provides the ability to host third-party applications • Energy efficiency with support for 802.3az Energy-Efficient Ethernet (EEE)-capable line cards • Industry-leading resiliency through In-Service Software Upgrade (ISSU) • First & only modular switch with 8 bidirectional line-rate Switched Port Analyzer/ Remote SPAN (SPAN/RSPAN) sessions ...

Cisco is the worldwide leader in networking for the Internet. Cisco provides the broadest line of solutions for transporting data, voice & video within buildings, across campuses, or around the world. Cisco solutions ensure that networks both public & private operate with maximum performance, security, & flexibility. ...

The Cisco Catalyst 2960-Plus Series Switches are fixed-configuration Fast Ethernet switches (Figure 1) that provide enterprise-class Layer 2 switching for branch offices, conventional workspaces, & infrastructure applications. They enable reliable & secure operations with lower total cost of ownership through a range of Cisco IOS software features, including Cisco Catalyst Smart Operations. Product Highlights Cisco Catalyst 2960-Plus switches feature: • 24 or 48 Fast Ethernet ports • Small Form-Factor Pluggable (SFP) & 1000BASE-T Gigabit Ethernet uplinks • IEEE 802.3af-compliant Power over Ethernet (Po E) • LAN Base or LAN Lite Cisco IOS Software feature set • Smart Operations tools that simplify deployment & reduce the cost of network administration • Cisco Energy Wise technology to manage energy consumed by connected devices • An enhanced limited lifetime hardware warranty (E-LLW), providing next-business-day replacement Applications & Benefits The Cisco Catalyst 2960-Plus Series provides cost-effective, enterprise class Ethernet switching for: • Branch offices, remote sites, & retail locations • Conventional desktop workspaces • Building infrastructure, physical security, & other nontraditional access applications Benefits of the 2960-Plus include: • Robust quality of service (Qo S) that prioritizes voice & critical business applications • Flexible security features that can limit access to the network & mitigate threats • Tools that reduce total cost of ownership through simplified operations & automation Tech Spec 10/100 Ethernet Interfaces
- 24 Uplink Interfaces
- 2 (SFP or 1000BASE-T) Cisco IOS Software Feature Set
- LAN Lite Forwarding Rate: 64-Byte L3 Packets, Millions of packets per second
- 6.5 Dementions
- 1.73 x 17.70 x 952 Inchs
- 4.4 x 45.0 x 24.2 CM MTBF in thousands of hours
- 667






...

The Cisco Catalyst 3750-X & 3560-X Series Switches are an enterprise-class lines of stackable & standalone switches, respectively. These switches provide high availability, scalability, security, energy efficiency, & ease of operation with innovative features such as Cisco Stack Power (available only on the Catalyst 3750&8209;X), IEEE 802.3at Power over Ethernet Plus (Po E+) configurations, optional network modules, redundant power supplies, & Media Access Control Security (MACsec) features. The Cisco Catalyst 3750-X Series with Stack Wise Plus technology provides scalability, ease of management & investment protection for the evolving business needs. The Cisco Catalyst 3750-X & 3560-X enhance productivity by enabling applications such as IP telephony, wireless, & video for borderless network experience. Cisco Catalyst 3750-X & 3560-X Series primary

Features: 24 & 48 10/100/1000 Po E+, non-Po E models, & 12 & 24 GE SFP port models 24 & 48 10/100/1000 UPOE-capable models with Energy Efficient Ethernet (EEE) support Four optional uplink network modules with GE or 10GE ports Industry first Po E+ with 30W power on all ports in 1 rack unit (RU) form factor Dual redundant, modular power supplies & fans Media Access Control Security (MACsec) hardware-based encryption Flexible Net Flow & switch-to-switch hardware encryption with the Service Module uplink Open Shortest Path First (OSPF) for routed access in IP Base image IPv 4 & IPv 6 routing, Multicast routing, advanced quality of service (Qo S), & security features in hardware Enhanced limited lifetime warranty (LLW) with next business day (NBD) advance hardware replacement & 90 day access to Cisco Technical Assistance Center (TAC) support Enhanced Cisco Energy Wise for operational cost optimization by measuring actual power consumption of the Po E devices, reporting, & reducing energy consumption across the network USB (Universal Serial Bus) Type-A & Type-B ports for storage & console respectively & an out-of-band Ethernet management port

...