APC Smart-UPS, Input: 400V 3PH, Output: 400V 3PH, Output Connections: Hard Wire 4-wire (3PH+G), Hard Wire 5-wire (3PH N+G) Features Wrap Around System Bypass (3) Breaker maintenance bypass panel to isolate the UPS from the critical load Top & bottom cable entry (standard) Flexibility that allows the customer to decide
- & at no extra cost.
...

APC Smart-UPS, 1200 Watts/1500 VA, Input 230V/ Output 230V, Interface Port Smart Slot, USB, Rackmount 2U Key Features Output Power Capacity
- 1200 Watts / 1500 VA Nominal Output Voltage
- 230V Input Frequency
- 50/60 Hz +/- 3 Hz (auto sensing) Output Connections
- (8) IEC 320 C13/ (2) IEC Jumpers Input Connections
- IEC-320 C14 Intuitive LCD interface Provides clear & accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. High frequency design Reduces or eliminates bulky transformers resulting in lighter units for ease of handling. Auto recognition of external batteries UPS recognizes when external battery packs are attached & automatically adjusts runtime. Predictive replace battery date Dynamically provides the month & year when battery replacement is recommended to aide in long term maintenance planning. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers & sensitive electronics. Multiple switched outlet groups Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off & non-critical load shedding. High online efficiency Reduces utlility costs, generates less heat. EPO Attach the device to an Emergency Power Off (EPO) system so that power can be turned off in an emergency situation. Smart Slot Customize UPS capabilities with management cards. Cold-start capable Provides temporary battery power when the utility power is out. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Scalable runtime Allows additional run time to be quickly added as needed. Rack/ Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Plug-&-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. For the replacement battery please see Quick Find 502892. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.




...

APC Smart-UPS X 120V External Battery Pack Rack/ Tower ensures clean, uninterrupted power to protected equipment while batteries are being replaced. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Remote UPS management Enable management of your UPS by connecting it directly to the network. Intuitive LCD interface Provides clear & accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. High frequency design Reduces or eliminates bulky transformers resulting in lighter units for ease of handling. Auto recognition of external batteries UPS recognizes when external battery packs are attached & automatically adjusts runtime. Predictive replace battery date Dynamically provides the month & year when battery replacement is recommended to aide in long term maintenance planning. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers & sensitive electronics. Multiple switched outlet groups Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off & non-critical load shedding. Preinstalled network management card Provides for remote management & control of the UPS over a network out of the box. High online efficiency Reduces utlility costs, generates less heat. EPO Attach the device to an Emergency Power Off (EPO) system so that power can be turned off in an emergency situation. Smart Slot Customize UPS capabilities with management cards. Cold-start capable Provides temporary battery power when the utility power is out. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Scalable runtime Allows additional run time to be quickly added as needed. Rack/ Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Plug-&-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. For the replacement battery please see Quick Find 502892. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Boost & Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models). Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Power conditioning Protects connected loads from surges, spikes, lightning, & other power disturbances. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Disconnected battery notification Warns when a battery is not available to provide backup power. Network manageable Provides remote power management of the UPS over the network. Audible alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition. LED status indicators Quickly understand unit & power status with visual indicators. Serial Connectivity Provides management of the UPS via a serial port.] For the Replacement Battery please see QF 482013. ...

Intuitive LCD interface provides clear & accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. High frequency design reduces or eliminates bulky transformers resulting in lighter units for ease of handling. APC Smart-UPS X 3000 Rack/ Tower LCD recognizes when external battery packs are attached & automatically adjusts runtime. Patent-pending operating mode bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. For the Replacement Battery please see QF 484258. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

APC Smart-UPS, 2700 Watts /3000 VA, Input 208V, 230V / Output 230V, Interface Port Smart Slot, Extended runtime model, Rack Height 4 U Boost & Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models). Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Power conditioning Protects connected loads from surges, spikes, lightning, & other power disturbances. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Disconnected battery notification Warns when a battery is not available to provide backup power. ...

Intuitive LCD interface provides clear & accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. High frequency design reduces or eliminates bulky transformers resulting in lighter units for ease of handling. APC Smart-UPS X 3000 Rack/ Tower LCD recognizes when external battery packs are attached & automatically adjusts runtime. Patent-pending operating mode bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Boost & Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models). Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Power conditioning Protects connected loads from surges, spikes, lightning, & other power disturbances. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Disconnected battery notification Warns when a battery is not available to provide backup power. ...

APC Smart-UPS, 800 Watts / 1000 VA, Input 230V / Output 230V, Interface Port Smart Slot, USB (Universal Serial Bus), 2U Intuitive LCD interface Provides clear & accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. High frequency design Reduces or eliminates bulky transformers resulting in lighter units for ease of handling. Auto recognition of external batteries UPS recognizes when external battery packs are attached & automatically adjusts runtime. Predictive replace battery date Dynamically provides the month & year when battery replacement is recommended to aide in long term maintenance planning. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers & sensitive electronics. Multiple switched outlet groups Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off & non-critical load shedding. High online efficiency Reduces utlility costs, generates less heat. EPO Attach the device to an Emergency Power Off (EPO) system so that power can be turned off in an emergency situation. Smart Slot Customize UPS capabilities with management cards. Cold-start capable Provides temporary battery power when the utility power is out. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Scalable runtime Allows additional run time to be quickly added as needed. Rack/ Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Plug-&-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Rack/tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...