APC Smart-UPS, 500 Watts / 750 VA, Input 230V / Output 230V, Interface Port Smart Slot, USB (Universal Serial Bus) Features Intuitive LCD interface Provides clear & accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys Predictive replace battery date Dynamically provides the month & year when battery replacement is recommended to aide in long term maintenance planning Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection Energy meter Provides actual kilowatt hours of usage for energy conscious users Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers & sensitive electronics High online efficiency Reduces utlility costs, generates less heat. Smart Slot Customize UPS capabilities with management cards Cold-start capable Provides temporary battery power when the utility power is out. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature Availability Boost & Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models). Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Power conditioning Protects connected loads from surges, spikes, lightning, & other power disturbances Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Disconnected battery notification Warns when a battery is not available to provide backup power Manageability Network manageable Provides remote power management of the UPS over the network Audible alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition. LED status indicators Quickly understand unit & power status with visual indicators Serial Connectivity Provides management of the UPS via a serial port USB (Universal Serial Bus) connectivity Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models). Disconnected battery notification Warns when a battery is not available to provide backup power Serviceability User-replaceable batteries Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR) Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Predictive failure notification Provides early-warning fault analysis ensuring proactive component replacement Resettable circuit breakers Enables a quick recovery from overload events Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Adaptability Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Safety Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment.
Includes:: All required connectors, Battery recycling guide, Installation guide, Reusable packaging For the replacement battery please see Quick Find 85519.
...

APC Smart-UPS, 500 Watts / 750 VA, Input 230V / Output 230V, Interface Port RJ-45 Serial, Smart Slot, USB (Universal Serial Bus), Rack Height 2 U Key Features Max Configurable Power
- 500 Watts / 750 VA Nominal Output Voltage
- 230V Input Frequency
- 50/60 Hz +/- 3 Hz (auto sensing) Output Connections
- (4) IEC 320 C13/ (2) IEC Jumpers Input Connections
- IEC-320 C14 Features Intuitive LCD interface Provides clear & accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. Predictive replace battery date Dynamically provides the month & year when battery replacement is recommended to aide in long term maintenance planning. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers & sensitive electronics. Single switched outlet group Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off & non-critical load shedding. High online efficiency Reduces utlility costs, generates less heat. Smart Slot Customize UPS capabilities with management cards Cold-start capable Provides temporary battery power when the utility power is out. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature Availability Boost & Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models). Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Power conditioning Protects connected loads from surges, spikes, lightning, & other power disturbances. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Disconnected battery notification Warns when a battery is not available to provide backup power. Manageability Network manageable Provides remote power management of the UPS over the network. Audible alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition. LED status indicators Quickly understand unit & power status with visual indicators. Serial Connectivity Provides management of the UPS via a serial port. USB (Universal Serial Bus) connectivity Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models). Disconnected battery notification Warns when a battery is not available to provide backup power. Serviceability User-replaceable batteries Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR) Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Predictive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Resettable circuit breakers Enables a quick recovery from overload events. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Adaptability Adjustable voltage-transfer points Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Safety Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment.
Includes::CD with software, Documentation CD, Installation guide, Rack Mounting support rails, Smart UPS signalling RS-232 cable, USB (Universal Serial Bus) cable For the replacement battery please see Quick find 283899. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.





...

APC Smart-UPS SUA5000RMI5U Rackmount UPS
- USB/ Serial + Powerchute Software APC Smart-UPS protects critical data by supplying
...

APC Smart-UPS, 700 Watts/1000 VA, Input 230V/ Output 230V, Interface Port RJ-45 Serial, Smart Slot, USB (Universal Serial Bus), Rack Height 2U Key Features Device Type
- UPS
- rack-mountable Networking
- RS-232, USB (Universal Serial Bus) Rack Size
- 2U Input Voltage
- AC 230 V Output Connector (s)
- 4 x power IEC 320 EN 60320 C13 APC award-winning Smart-UPS is the most popular UPS in the world for servers, storage & networks. Trust to protect critical data & equipment from power problems by supplying clean & reliable network-grade power. In addition to legendary reliability & manageability, Smart-UPS have extremely high efficiency at low, medium & high load levels making them ideal for today's multi-core or virtualized servers that have varying load consumption. Smart-UPS series have long been considered the benchmark for all network & server UPS's. Smart-UPS feature a 16-segment LED display, extended range automatic voltage regulation (AVR), & pure sine wave output on battery. Features Intuitive LCD interface Provides clear & accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. Predictive replace battery date Dynamically provides the month & year when battery replacement is recommended to aide in long term maintenance planning. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC Single switched outlet group Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off & non-critical load shedding. High online efficiency Reduces utlility costs, generates less heat. Smart Slot Customize UPS capabilities with management cards Cold-start capable Provides temporary battery power when the utility power is out. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature Availability Boost & Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models). Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Power conditioning Protects connected loads from surges, spikes, lightning, & other power disturbances. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Disconnected battery notification Warns when a battery is not available to provide backup power. Manageability Network manageable Provides remote power management of the UPS over the network. Audible alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition. LED status indicators Quickly understand unit & power status with visual indicators. Serial Connectivity Provides management of the UPS via a serial port. USB (Universal Serial Bus) connectivity Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models). Disconnected battery notification Warns when a battery is not available to provide backup power. Serviceability User-replaceable batteries Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR) Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Predictive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Resettable circuit breakers Enables a quick recovery from overload events. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Adaptability Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Safety Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment.
Includes::CD with software, Documentation CD, Installation guide, Rack Mounting support rails, Smart UPS signalling RS-232 cable, USB (Universal Serial Bus) cable For the replacement battery please see Quick Find 486884. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.






...

APC Smart-UPS RT is a family of high-density, performance UPSs for voice & data networks, medical labs, & light industrial applications. 6U form factor allows standardization across multiple applications. High power internal chargers allow virtually unlimited additional matching battery packs to comply with aggressive runtime demands of business-critical systems. Customers with harsh power environments looking for extremely tight voltage & frequency regulation, internal bypass, & input power factor correction typical of double conversion online topology will get them in the Smart-UPS RT. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

SMC1000I-2U Features Intuitive LCD interface Provides clear & accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers & sensitive electronics. High online efficiency Reduces utlility costs, generates less heat. Cold-start capable Provides temporary battery power when the utility power is out. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Smart-UPS Features & Benefits Boost & Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models). Intelligent Battery Management Maximizes battery performance, life, & reliability through intelligent, precision charging. Power conditioning Protects connected loads from surges, spikes, lightning, & other power disturbances. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Disconnected battery notification Warns when a battery is not available to provide backup power. Network manageable Provides remote power management of the UPS over the network. Audible alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition. LED status indicators Quickly understand unit & power status with visual indicators. Serial Connectivity Provides management of the UPS via a serial port. USB (Universal Serial Bus) Connectivity Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models). User-replaceable batteries Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR) Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Predictive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Resettable circuit breakers Enables a quick recovery from overload events. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment. ...

Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Pure sine wave output on battery Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers & sensitive electronics. LCD status display Provides key UPS status at a glance. LCD status display has multiple status indicators with load & battery bar graphs. Cold-start capable Provides temporary battery power when the utility power is out. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Disconnected battery notification Warns when a battery is not available to provide backup power. Network manageable Provides remote power management of the UPS over the network. Audible alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition. LED status indicators Quickly understand unit & power status with visual indicators. Serial connectivity Provides management of the UPS via a serial port. Disconnected battery notification Warns when a battery is not available to provide backup power. Hot-swappable batteries Ensure clean, uninterrupted power to protected equipment while batteries are being replaced. Predictive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Resettable circuit breakers Enable a quick recovery from overload events. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance. Adjustable voltage-transfer points Maximize useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. For the replacement battery please see Quick find 486884. ...

High online efficiency Reduces utlility costs, generates less heat. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers & sensitive electronics. LCD Status Display Provides key UPS status at a glance. Multiple status indicators with load & battery bar graphs. Cold-start capable Provides temporary battery power when the utility power is out. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Boost & Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models). Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Power conditioning Protects connected loads from surges, spikes, lightning, & other power disturbances. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Disconnected battery notification Warns when a battery is not available to provide backup power. Network manageable Provides remote power management of the UPS over the network. Audible alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition. LED status indicators Quickly understand unit & power status with visual indicators. Serial connectivity Provides management of the UPS via a serial port. Disconnected battery notification Warns when a battery is not available to provide backup power. For the replacement battery please see Quick find 2987. ...

Designed For P/ N:SUA2200, SUA2200I, SUA2200XL, SUA2200XLI, SUA3000, SUA3000I, SUA3000XL, SUA3000XLI, SUA3000XLT, SUA5000RMI5U, SUA5000RMT5U ...

APC Smart-UPS RT is a family of high-density, performance UPSs for voice & data networks, medical labs, & light industrial applications. Capable of supporting 10KVA in a 6U rack/tower convertible form, users can support power hungry blade servers or heavily loaded equipment racks. This flexible form factor allows standardization across multiple applications. High power internal chargers allow virtually unlimited additional matching battery packs to comply with aggressive runtime demands of business-critical systems. Customers with harsh power environments looking for extremely tight voltage & frequency regulation, internal bypass, & input power factor correction typical of double conversion online topology will get them in the Smart-UPS RT. Max Configurable Power
- 2100 Watts / 3000 VA Nominal Output Voltage
- 230V Input Frequency
- 50/60 Hz +/- 5 Hz (auto sensing) Output Connections
- (8) IEC 320 C13/ (2) IEC 320 C19/ (2) IEC Jumpers Input Connections
- British BS1363A/IEC-320 C20/ Schuko CEE 7/EU1-16P Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. Scalable runtime Allows additional run time to be quickly added as needed. Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Network manageable Provides remote power management of the UPS over the network. Infra Stru Xure Manager Compatible Enables centralized management via the APC Infra Stru Xure Manager. Smart Slot Customize UPS capabilities with management cards. LED status indicators Quickly understand unit & power status with visual indicators. Serial Connectivity Provides management of the UPS via a serial port. Plug-&-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Rack/ Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP. For the Replacement Battery please see QF 696243. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.




...