APC Back-UPS Pro, 720 Watts / 1200 VA, Input 230V / Output 230V, Interface Port DB-9 RS-232, USB (Universal Serial Bus) For the Replacement Battery please see QF 482013. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Power-saving outlets Automatically cuts power to idle equipment to conserve electricity. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Battery-protected & surge-only outlets Reserves power capacity & run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment Cold-start capable Provides temporary battery power when the utility power is out. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Disconnected battery notification Warns when a battery is not available to provide backup power. Dataline Surge Protection Provides protection of connected equipment from power surges on the data lines. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Audible alarms Provides notification of changing utility power & UPS power conditions User-replaceable batteries Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR) USB (Universal Serial Bus) connectivity Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models). Serial Connectivity Provides management of the UPS via a serial port. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles. Boost & Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models). Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment. Battery replacement without tools Enables fast battery replacement, lowering Mean Time to Repair (MTTR). LCD graphics display Text & mimic diagrams that display modes of operation, system parameters & alarms. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

APC BE550G-UK Power-Saving Back-UPS ES 550VA UPS With 8 Outlets Features Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Battery-protected & surge-only outlets Reserves power capacity & run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment Cold-start capable Provides temporary battery power when the utility power is out. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Dataline Surge Protection Provides protection of connected equipment from power surges on the data lines. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Audible alarms Provides notification of changing utility power & UPS power conditions User-replaceable batteries Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR) USB (Universal Serial Bus) connectivity Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models). Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment. Battery replacement without tools Enables fast battery replacement, lowering Mean Time to Repair (MTTR). Protection Battery & surge protected outlets Back up & protect your hardware & data during power outages, surges & spikes. Surge only outlets Protect secondary electronics from surges & spikes without reducing battery power used to run primary electronics during an outage. Availability Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Serviceability Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Manageability Audible alarms Provides notification of changing utility power & UPS power conditions LED status display Quickly understand unit & power status with visual indicators. Safety Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment.
Includes:: CD with software, Telephone Cable, User Manual
...

Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Battery-protected & surge-only outlets Reserves power capacity & run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment Cold-start capable Provides temporary battery power when the utility power is out. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Dataline Surge Protection Provides protection of connected equipment from power surges on the data lines. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Audible alarms Provides notification of changing utility power & UPS power conditions User-replaceable batteries Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR)USB connectivity Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models). Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment. Battery replacement without tools Enables fast battery replacement, lowering Mean Time to Repair (MTTR). Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. For replacement battery please see QF 85520 Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

APC offers a wide variety of Basic Rack Power Distribution Units (PDUs), which allow users to distribute power outlets to rack-mount equipment. Horizontal & vertical units are available as well as a variety of power inputs & outputs to fit most power environments. ...

APC offers a wide variety of Basic Rack Power Distribution Units (PDUs), which allow users to distribute power outlets to rack-mount equipment. Horizontal & vertical units are available as well as a variety of power inputs & outputs to fit most power environments. APC now offers Basic Rack PDUs that mount veritcally, without tools in the rear channel of a Net Shelter VX. ...

Lightning & power surges can permanently ruin your electronic equipment. Changes in voltage cause lockups & loss of work. This unit will protect your equipment from the threat of bad power. The Essential Surge Arrest series offers a great value for home equipment & business applications such as small office/home computers. ...

American Power Conversion (APC) is a global leader in the designing, manufacturing & marketing of power protection equipment, including surge suppressors, uninterruptible power supplies (UPS), power conditioning equipment & related software for computer & computer-related equipment. To keep its products well-supplied APC offers a wide range of accessories. This 1U Blanking Panel Kit covers unused rack space, & promotes proper airflow. ...

Includes: Mounting hardware, Qty 1 each: 1U & 2U & 4U & 8U Panel. Covers open rack space to ensure proper airflow, Promotes
...

Uniquely designed to accept input power from any single phase, 120V power source such as a UPS, solar panel or other alternative energy power inputs. Reserves power capacity & run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment. Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

These cord retention brackets & vertical-mount bracket kits are designed to complete rack power distribution solutions & include front & rear rail segments (2 each). Designed For P/N: AP7721, AP7723, AP7730, AP7752 ...