This analogue aerial comes in black complete with adjustable loop for best possible reception. It is non amplified & also features metal tubes for optimum signal & is suitable for digital TV & DAB radio reception. Brand: One For All Function: INDOOR DIGITAL TV & DAB RADIO AERIAL Product

Depth: 8 cm Product

Height: 34 cm Product Weight: 0.378 Product

Width: 18 cm Suitable For: DIGITAL TV & DAB RADIO RECEPTION Features of Product RECEIVES DIGITAL TV & DAB RADIO SIGNALS ADJUSTABLE LOOP & DUAL METAL TUBES FOR OPTIMUM SIGNAL RECTION ALSO RECEIVES TERRESTRIAL HIGH DEFINITION TV SIGNALS





...

The PC2002 series switches are the ideal solution for powering remote devices such as IP phones video cameras wireless access points etc which are more than 100m from a Power over Ethernet switch. The ATPC2002POE features an SFP port & a 101001000T twistedpair port. The SFP port will accept either a 100MB or 1000MB SFP fiber Allied Telesis offers a wide variety of SFPs featuring multimode up to 2km ATSPEX single mode & Bi Di optics. ...

Allied Telesis AT FS232/1
- Media converter
- 10 Base-T, 100 Base-FX, 100 Base-TX
- RJ-45 / SC single mode
- external
-




...

Allied Telesis' simply connects the world with affordable, highly reliable networking technology & products. Allied Telesis' product lines build networks that link people to information
- in small networks, across large networks, & over the Internet. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.
...

The AT-FS201 two-port Fast Ethernet switch interconnects segments of Ethernet & Fast Ethernet networks to upgrade, extend & relieve network congestion where it's needed, & cost-effectively. The switch not only provides a means for connecting to a new network media or speed, but further improves performance by providing a means to segment networks into smaller, connected subnets. The AT-FS201 features plug-&-play installation & a compact chassis design that makes it a great addition to wide variety of networking environments. With its external power supply, the AT-FS201 switch can be used either as a standalone device or, for more efficient installation in a higher-density environment, in Allied Telesis'' AT-MCR12 redundantly powered rackmount chassis. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Allied Telesis' GS950 Series Web Smart Switch integrates the simplicity of unmanaged switches with the performance & reliability of managed switches to provide a cost-effective solution integrating management at the edge of the network. Web Smart switch provides key features using simple web-based management, such as: port-based VLANs, 802.1p Qo S, port trunking/link aggregation, port mirroring, priority queue's, spanning tree & 802.1x security support. With up to 8K MAC addresses & a 512K packet buffer, the GS950 Series Web Smart switch is an ideal option for integrating management into your network solution. Features 24 10/100/1000T ports 4 Gigabit SFP uplink ports Web Based Management 802.1X Security Port-Based VLANs (up to 64 groups) Link Aggregation Port Setting (Speed, Availability, Flow Control) Port Mirroring IGMP snooping (v 1/v 2) Static multicast group Spanning Tree, 802.1d/w Desktop or Rack/ Wall Mountable 100FX SFP support ...

The 8000GS/24 Po E is a low-cost managed stackable Gigabit Ethernet switch with Po E connectivity at the edge for Vo IP phones & wireless access points. The 8000GS/24 Po E has a 1RU form factor, four Gigabit Ethernet SFP combo bays & dedicated stacking interfaces. An extensive set of features such as link aggregation, VLANs & port mirroring can be performed across the stack. ...

Allied Telesis' new 8000GS series features a high-bandwidth 20 Gbps resilient ring stacking topology, which enables up to six switches to be stacked & operate as though they were a single device. This saves customers time on administration, as a stack is quicker & easier to manage than several individual devices. The true stacking architecture also enables link aggregation, VLAN configuration, & port mirroring across the stack. These features are especially important to companies with densely-populated networks, where the high port count & stacking architecture make the AT-8000GS devices ideal to be used as network edge switches. They are also suitable for smaller companies who are looking for powerful Gigabit performance from a single switch now, as well as the flexibility to add additional switches as the company & its network needs grow. Each switch in the new 8000GS series

Includes:: four SFP combination ports, so that customers can use the built-in 10/100/1000T ports or an optical SFP which is available separately. A choice of management methods come as standard on the new switches, including an industry standard compatible local Command Line Interface (CLI), remote CLI via Telnet, SNMP or a simple, intuitive Web-based interface. These familiar options reduce learning time while minimizing the cost of deployment. As it is designed for deployment at the network edge
- a vulnerable point in any network
- the new 8000GS range supports today's security requirements including IEEE 802.1x & RADIUS. These protocols protect the network from unauthorized access by ensuring robust user authentication. The devices also include support for TACACS+ to make remote security administration easier & provide separate authentication, authorization & accounting services. The 8000GS family supports guest VLANs so that visitors who physically connect to the network can be restricted to a predefined area, enabling them to have access to the Internet while on company premises but not to corporate servers. Quality of service features include the ability to separate network traffic into eight priority types in four queues per port, ensuring fast, efficient delivery of voice, video & data traffic. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

AT-FS200 Series Fast Ethernet bridging media converters are two port, unmanaged & standalone. They convert copper to fiber media, enabling both ports to operate at the same or at different speeds. Converts Copper Fast Ethernet to Multimode fiber Operates under all traffic loads Fan-less design Auto MDI/MID-X Copper Port Missing Link Support Transparent to Jumbo packets & VLAN tagged packets Fiber Link Test Function Industry standard fiber ST/SC connector Converts Speed as well as media Energy Star Power Adapters save customers a minimum of 20% (over previous models) in power consumption Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The AT-9000/52 provides high performance Layer 2 switching at an affordable fixed configuration platform. The switch brings advanced enterprise features to a more affordable level while supporting the changing needs of the SMB market space to improve the delivery of converged data. Support for jumbo Ethernet frames enables higher throughput of time sensitive data. ...