80 PLUS BRONZE Certified With up to 87% efficiency (230V AC, 50% load), it`s 80 PLUS BRONZE certified & guarantees higher efficiency compared to uncertified products. &8251; 80 PLUS is an energy efficiency certification program administered by Ecos Consulting of the U.S.A. Two-Forward Switching Design The Two-Forward Switching Design minimizes switching loss & internal heat for enhanced reliability & stability. ATX12V v 2.3 The latest PSU design standard is incorporated for compatibility with a wide range of CPUs, motherboards, & graphic cards. Quad Rail +12V DC Output Four independent +12V outputs for core components facilitate highly stable operation. Dual Graphics Card Support 6-Pin & 6+2 Pin PCI-E Connectors are provided for dual graphic card setup such as SLI & CF. (Dual graphics card may or may not be supported depending on the graphics card specifications.) Less Than 1W Standby Power Consumption The energy efficient Green IC circuitry consumes much less standby power (less than 1W) compared to other PSU`s without this feature. Meets Er P 2010 Lot 6 Standby Power Standards (Er P: Energy-related Product) This product complies with Er P 2010 Lot 6, the Standby Power & High Energy Efficiency standards of the European Union. Ultra Quiet 120mm Sleeve Bearing Ultra quiet 120mm Sleeve Bearing fan increases airflow while minimizing noise for a superbly quiet computing environment. Active PFC for enhanced Power Factor & Reduced Harmonics By implementing Active PFC (Power Factor Correction), the Passive PFC (about 75%) has been enhanced up to 99% while harmful harmonic frequencies are reduced to meet the Line Harmonic Distortion Requirement of IEC61000-3-2 Class D Specifications. Supports ATX20+4 Pin Main Connector ATX20+4 Pin Main Connector broadens the range of motherboard compatibility. Supports ATX12V CPU 4-Pin & EPS12V CPU 8-Pin Two ATX12V CPU 2 2 (4-Pin) power cables can be combined to form an EPS12V CPU 8-Pin power cable. Sleeved Cables All power cables are sleeved for easy cable management & enhanced air circulation inside the computer case. Multiple Safety Features Safety features including Over-Voltage Protection, Over-Current Protection, Short-Circuit Protection, Under-Voltage Protection, & Over Power Protection safeguard the system. Meets WEEE & Ro HS Standards This product complies with the WEEE & Ro HS environmental directives of the European Union. International Safety & EMC Certifications High Reliability The MTBF exceeds 100, 000 hours of continuous operation at 25&8451;, full load. ...

Blue LED Water Block Built -in Pump Within water block Slim Water Block Design Micro Fins & Copper Base High Compatibility Zalman High Quality Design High Durability tube applied to ensure safety Minimized noise, Maximized performance, Qmax 340. Dual Cooling Fan Can be installed Specifications Water Block & Pump
-

Dimensions- ˜65 x 32T
- Materials-Base: Pure Copper
- Water Pump-Enclosed Type
- LED Color-Blue
- Weight (Water Block)-195g
- Connector-3 Pin Radiator
-

Dimensions-153 (L) x 124 (W) x 52 (H)mm
- Materials-Aluminum
- Tube Length-300mm Fan
-

Dimensions-120 (L) x 120 (W) x 25 (H)mm
- Speed-900
- 2, 000rpm ± 10%
- Bearing-Long life bearing
- Control Method-PWM Control, Auto Restart
- Connector-4 Pin
- PWM Duty Cycle-30
- 100 ± 5% Qmax
- 340w Rated Voltage
- DC12V Weight
- 810g

























...

Package

Width: 46cm Package Length: 33cm Package

Height: 50cm Gross Weight: 7.80kg Key



...

Special coated surface for fast & fine sliding Smooth & slick finish with high density Poly Jersey prevents static Tough against abrasion for long-lasting use Large anti-slip rubber base Environmentally friendly materials (Ro HS compliant) Specifications

Dimensions 400 (W) x 300 (H) x 3 (D)mm Weight 215g Materials Rubber, Poly Jersey Supported Mouse Ball Mouse, Optical Mouse, Laser Mouse

...

4/3-FAN structured to cool down the system efficiently (2 additional fans can be installed) Maximizes the air flow keeping the HDD & the system cool. According to the user needs control fan speed up to 6 fans. Supports bottom PSU installation for effective cooling of PSU & inner space of case. Dash board style user-centered design provides style convenience. Dust filters on the bottom & front prevent dust from entering. 2 USB (Universal Serial Bus) 3.0 port that speed up to 5 Gbps. One touch tool-free ODD bay for easy & quick installation. USB (Universal Serial Bus) ports, audio socket, power & reset buttons set on the front for user convenience. Place smart phone, external hard drive on the stand next to the USB (Universal Serial Bus) port for convenient charging & connection. luxurious interior with black coating finishing touch. 3in 1 Adapter Tray is provided for installing FDD / 3.5" HDD / 2.5" HDD/SSD. Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Multi guide provided to prevent VGA card from bending & for installation for additional fans. Without the side guide 300mm high performance VGA card can be installed. Module design for convenient installation of SSD & HDD. Front detachable Tool Free ODD bay for convenient installation. Anti-slip rubber at the bottom of the case & the PSU helps to eliminate vibration sound. Separate aperture for CPU cooler is provided for convenient CPU cooler installation without having to remove motherboard from case. Cable hole provided for efficient use of the space. Up to 7 PCI slots scalability secured Specifications Enclosure Type
- ATX Mid Tower Dimensions
- 207 (W) x 533 (H) x 541 (D)mm Weight
- 9kg (19.84lb) Materials
- Plastic, Steel Motherboard Compatibility
- Standard ATX / Micro ATX Power Supply Compatibility
- Standard ATX / ATX12V VGA Card
- Full Size (300mm/11.8inch) Drive Bays
- 5.25" External Bay x 6 - 3.5" Internal Bay x 3
- Common (3in-1) Internal Bay 5.25"/3.5"/2.5" x 1 Cooling Components (Fans) - - Rear 120mm Fan Vent x 1 (1 Fan Included) - Top 120mm Fan Vent x 2 (1 Fan Included, 1 Fan Optional) - Cooling Kit (internal) 92mm Additional Fan Provided x 1 (1 Fan Included) - Bottom 120mm Fan Vent x 1 (1 Fan Optional) Fan Controller
- Simultaneously Control 6 Expansion Card Slots
- 7 I/O Ports
- Headphones x 1, Mic x 1, USB (Universal Serial Bus) 2.0 x 2, USB (Universal Serial Bus) 3.0 x 2 Color
- Black












...

Zalman Reserator 3 MAX Ultimate Liquid CPU Cooler Zalman with its unique technology came up with the world first nanofluids refrigerant applied cooler to maximize the cooling performance. Zalman with its unique technology came up with the world first nanofluids refrigerant applied cooler to maximize the cooling performance. Using nanofluids coolant improves thermal conductivity by mixing nanoparticles with fluids. Nm (nanometer): an SI unit of length, equal to 10?9?m (a billionth of a meter). Slim fin pure cooper dual radial radiator designed for optimized air flow. Four times more powerful cooling efficiency with two copper pipes- Quadro cooling path system. Pure cooper water block & inner micro-fin applied for quick heat transfer. Built-in low noise/ high performance pump inside the water block, minimized the tube connection & helps to speed up the circulation of the coolant for optimized cooling performance. Induction of the airflow inside the case increases cooling efficiency of the motherboard & VRM. Blue LED on the water block & the radiator fan is applied to create the luxurious & powerful image. Extra 120mmfan can be mounted for more powerful performance. (Extra fan available for purchase.) Coolant is already placed inside the confined product, it can be used semi-permanently without replacement or separate maintenance. Features Up to 400 watts cooling performance using dual radiators & nanofluids High performance integrated water pump & nickel-plated radiator Blue LED lighting effect on both the pump & the fan Compatible with most desktop CPU sockets & mid-tower cases ...

Effectively keeps HDD cool & reduces internal heat through the front vent. Up to four fans can be mounted including one back standard-equipped fan. Supports bottom PSU installation for effective cooling of PSU & inner space of case luxurious interior with black coating finishing touch.. USB (Universal Serial Bus) 3.0 ports, audio socket, power & rest buttons set in the front for user convenience. Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Efficient layout allows the installation of Micro-ATX/ Mini ITX main board & VGA/PSU/ODD, despite of its slim design. Dust filters installed on the front, side & bottom prevent dust from entering. 250mm~300mm high performance VGA card can be installed. Safe edge molding for safer installing environment. Easily install HDD & SSD at the same time. Anti-slip rubber at the bottom of the case & the PSU helps to eliminate vibration sound. No need to touch the M/B for CPU cooler replacement through CPU cooler mounting holes. Cable holes also provided for neat cable management Provides spacious interior with 4 PCI extension slots. Enclosure Type ATX Mini Tower Case Dimensions 189 x 427.5 x 364mm Motherboards Micro ATX / Mini ITX Power Supply Unit Standard ATX / ATX 12V PCI/AGP Card Compatiblility up to 250~300mm Expansion Slots 4 slot Color Black Drive Bays 5.25" External Bay x 1 3.5" Internal Bay x 2 2.5" Internal Bay x 3 Cooling Components (Fans) Rear 1 x 92 (80)mm Fan (Standard) Front 1 x 120mm Fan (Optional) Side 2 x 120mm Fan (Optional) I/O Ports 1 x Microphone, 1 x Headphones, 1 x USB (Universal Serial Bus) 3.0, 1 x USB (Universal Serial Bus) 2.0 ...

Up to four fans can be mounted including one back standard-equipped fan. Supports bottom PSU installation for effective cooling of PSU & inner space of case luxurious interior with black coating finishing touch.. USB (Universal Serial Bus) 3.0 ports, audio socket, power & rest buttons set in the front for user convenience. Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Efficient layout allows the installation of Micro-ATX/ Mini ITX main board & VGA/PSU/ODD, despite of its slim design. Dust filters installed on the front, side & bottom prevent dust from entering. 250mm~300mm high performance VGA card can be installed. Safe edge molding for safer installing environment. Easily install HDD & SSD at the same time. Anti-slip rubber at the bottom of the case & the PSU helps to eliminate vibration sound. No need to touch the M/B for CPU cooler replacement through CPU cooler mounting holes. Cable holes also provided for neat cable management Provides spacious interior with 4 PCI extension slots. Specifications Enclosure Type ATX Mini Tower Case Dimensions 189 x 427.5 x 364mm Motherboards Micro ATX / Mini ITX Power Supply Unit Standard ATX / ATX 12V PCI/AGP Card Compatiblility up to 250~300mm Expansion Slots 4 slot Color Black Drive Bays 5.25" External Bay x 1 3.5" Internal Bay x 2 2.5" Internal Bay x 3 Cooling Components (Fans) Rear 1 x 92 (80)mm Fan (Standard) Front 1 x 120mm Fan (Optional) Side 2 x 120mm Fan (Optional) I/O Ports 1 x Microphone, 1 x Headphones, 1 x USB (Universal Serial Bus) 3.0, 1 x USB (Universal Serial Bus) 2.0 ...

Zalman T4 V2 Mini Tower PC Case Key

Features: Bottom PSU installation High efficiency VGA card installation

...

Front Mesh Cover for High Cooling Performance The front mesh bay cover provides cool air into the system while dust filters prevent dust from entering. Supports up to 7 System Fans Up to 7 system fans are installed to expel hot air effectively from the case. Zalman`s Powerful HDD Cooling Solution Interactive Cooling System: Hot air generated from HDD is expelled through both sides. Cooling Performance is maximized for HDD cooling, & the overall PC exhaust is increased. Top Air Vent Exhaust/ Tuning For for user convenience, Top air vents expel exhaustive air from the top cooling fan. In addition, translucent acryl vents are effective for tuning. Side-Panel Acryl Tuning Dynamic Side Acryl Tuning is provided for users to view the interior of gaming system. Supports 4 USB (Universal Serial Bus) 2.0 I/O module provides 4 USB (Universal Serial Bus) 2.0 ports for user convenience & expandability. Dust Filters for Front & Bottom of System & PSU Dust filters in the front & bottom mesh covers prevent dust from entering the system & keep the internal components dust-free. Additional Card Holder Provided When installing VGA Card & PCI Slot, the bracket can be used permanently. Supports Bottom PSU Installation & Aperture for Cable Management Z11 Plus supports bottom PSU installation & provides an aperture for cable management to make better use of interior space. Black Interior Coating The interior of chassis is coated black to provide a sense of unity & elegant design. Anti-Vibration Rubber Stand Anti-Vibration Rubber prevents noise & also keeps the system safe from water or other liquid. Tool Free HDD Installation with Anti-Vibration Rubber The server-type Tool-Free HDD Mount Trays allow easy HDD installation/removal & maintenance. Spacious Interior for 290mm Card Installation The interior has been designed to be spacious for easy installation & maintenance of various components. Supports Solid-State Drive (SSD) Space is provided on the back of M/B plate for installing 2.5' HDD/SSD. Use the bracket located on the 5.25 bay. Separate Apertures for Convenient CPU Cooler Installation Separate apertures for CPU cooler are provided for convenient CPU cooler installation without having to remove motherboard from case. 3-in-1 Bracket Provided 3IN1 Adapter Tray is provided for installing FDD / 3.5 HDD / 2.5' HDD/SSD. Rear Tube Apertures for Liquid Cooling Systems Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Enclosure Type
- ATX Mid Tower

Dimensions
- 260 (W) x 498 (H) x 525 (D)mm Weight
- 7.3kg Material
- Plastic, Steel Motherboard Compatibility
- Standard ATX / Micro ATX Power Supply Compatibility
- Standard ATX / ATX12V VGA Compatibility
- Full Size (up to 290mm) Expansion Slot
- 7 Drive Bays
- 5.25' External Bay x 4 3.5' External Bay x 1, Internal Bay x 5 5.25'/3.5'/2.5' 1 (3in-1) Cooling Components Front
- 1 x 120mm Blue LED Fan (120mm / 140mm) Top
- 2 x 120mm Fan (Optional) Rear
- 1 x 120mm Fan (Standard) Side
- 2 x 80mm Fan Bottom
- 120mm/140mm Fan Vent x 1 (Fan optional) I/O Ports
- Mic x 1, Headphones x 1, USB (Universal Serial Bus) 2.0 x 4 Color
- Black

















...