Trend guide bushes can be attached to the base of the Router. They are designed to follow the contours of a template. Guide bush guides the router when using a template. Fits directly to Trend T3, T4, T5, T5 MK2, T9, T10 & T11, & some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. ...

The 16-Port Gigabit GREENnet Switch, model TEG-S16g, provides high bandwidth performance, ease of use, & reliability, all while reducing power consumption by up to 70%*. GREENnet technology automatically adjusts power voltage as needed, resulting in substantial energy savings. Embedded GREENnet technology works right out of the box with no management requirement. Boost office network efficiency & eliminate network congestion with Gigabit speeds & a total switching capacity of 32 Gbps with Full-Duplex mode. A built in universal power supply reduces cable clutter & diagnostic LEDs help with network troubleshooting. Plug & Play this sturdy metal switch for reliable high-speed network connectivity. Features 16 x 10/100/1000 Mbps Auto-MDIX Gigabit Ethernet ports On / off power switch Features a 32 Gbps forwarding capacity Internal power supply reduces clutter GREENnet technology reduces electrical power consumption when: Ethernet port is not in use Connected device is turned off Connected device is in power-saving mode Based on Ethernet cable length IEEE 802.3x Flow Control for full-duplex mode Back pressure Flow Control for half-duplex mode Store-&-Forward switching architecture with non-blocking wire-speed performance Integrated address look-up engine with an 8K MAC address table 2 M Bits RAM data buffer Operates & maximizes packet filtering & forwarding rate Jumbo Frame support up to 9216 Bytes Rackmount hardware included Sturdy metal housing Diagnostic LEDs & Plug & Play support 3-year limited warranty * Max power savings compared with standard TRENDnet switches ...

Ensure zero downtime with this hot swappable 100 ~ 240 VAC redundant power supply. Built-in over voltage & short circuit protection protects networking hardware. Use this device with the TFC-1600 chassis as a power supply backup. ...

The TFC-1000S20 Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP & spans distances up to 20km (12.4miles). Ports include 1 x 1000 Base-T (RJ-45) port & 1 x 1000 Base-LX (SC-Type) port. Features SC-type single-mode fiber port connects over distances of up to 20km (12.4 miles) 1000 Base-T Gigabit copper port supports Full-Duplex mode Supports port level SNMP management Functions as a stand alone converter or with the TFC-1600 fiber chassis Compliant with IEEE 802.3ab 1000 Base-T & IEEE 802.3z 1000 Base-LX standards 1 x 1000 Base-T RJ-45 port 1 x 1000 Base-LX single-mode SC type fiber port Provides Dip switch to set: Fiber (Forced/ Auto-Negotiation), LLR (Enable/ Disable) Support LLCF (Link Loss Carry Forward, Link Pass Through) Support LLR (link Loss Return) for Fiber port Monitor & configure Ethernet or Fiber’s duplex mode, LLR, port on/off & receive link down information via management module TFC-1600MM & chassis TFC-1600 Status LED indicators for Power & Link/ Activity Wall mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty ...

The 12d Bi Outdoor Omni Directional Antenna blankets a large area with consistent continuous wireless connectivity in all directions. This product is ideal for large area Wi-Fi hotspots & other business applications. Connect this versatile outdoor antenna to any wireless 802.11b/g network device with an N-Type connector. Simply wall or pole mount the TEW-AO12O at the angle of your choice for maximum wireless coverage & throughput. Improves wireless coverage, signal transmission & reception

Includes:: mounting kit Compatible with 2.4 G Hz 802.11b/g wireless devices Works with wireless devices utilizing a Reverse SMA male connector Serves as an indoor or outdoor Omni Directional relocation Antenna Simple & quick install No configuration or installation software required

...

The 150 Mbps Wireless N PCI Adapter, model TEW-703PI, connects a desktop computer to a high speed wireless n network. This adapter installs quickly to a free PCI slot on a Window’s based desktop computer. An LED conveys wireless connection status. Advanced wireless encryption protects your valuable data. A detachable antenna gives users the ability to change the connected antenna. Stream media, download files, & play games on a desktop computer over a wireless connection. Wi-Fi compliant with IEEE 802.11n standard Backwards compatible with IEEE 802.11g & IEEE 802.11b devices Supports Ad-Hoc (Peer-to-Peer b/g only) or Infrastructure (AP-Client) mode High-speed data rates up to 150 Mbps using an IEEE 802.11n connection Dynamic Data Rate Scaling from 150 Mbps to 1 Mbps Maximum reliability, throughput, & connectivity with Automatic Data Rate Switching Supports advanced wireless encryption up to WPA/WPA2-RADIUS Easy user setup & diagnostic utilities Coverage of up to 100 meters indoor & 300 meters outdoor Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The 16-Port 10/100 Mbps Switch, model TE100-S16D, is a reliable Plug-&-Play solution in a compact form factor. Boost network efficiency with a total switching capacity of 3.2 Gbps with Full-Duplex mode. Diagnostic LEDs on the front of the switch help with network troubleshooting. IEEE 802.3x flow control & 4K MAC address entry support provide uninterrupted connectivity. This switch is well suited for networking room, departmental group, & home office applications. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The 16-Port 10/100 Mbps Po E Switch, model TPE-S160, reduces equipment & installation costs by delivering data & power over existing Ethernet cables to Power over Ethernet (Po E) enabled devices such as Access Points & IP Cameras. Boost office efficiency & reduce network congestion with a total switching capacity of 3.2 Gbps. LED indicators display device status for easy power management & troubleshooting. An internal power supply reduces clutter & delivers 15.4 Watts to each Po E port. A convenient on/off button is located on the back of the switch. Non-Po E devices can connect to the switch—auto-sensing Po E technology cuts power to non-Po E connected devices. Use TRENDnets Po E Splitter to install non-Po E devices in remote locations. Reduces equipment cost by delivering data & power over existing network cables 16 x 10/100 Mbps Full Duplex Po E ports 3.2 Gbps switching capacity Use with TRENDnets Po E Splitter to network & power non-Po E devices Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The 16-Port Gigabit GREENnet Switch, model TEG-S16 Dg, provides high bandwidth performance, ease of use, & reliability, all while reducing power consumption by up to 70%.GREENnet technology automatically adjusts power voltage as needed, resulting in substantial energy savings. Embedded GREENnet technology works right out of the box with no management requirement. Boost office network efficiency & eliminate network congestion with Gigabit speeds & a total switching capacity of 32 Gbps with full-duplex mode. A built in universal power supply reduces cable clutter & diagnostic LEDs help with network troubleshooting. Plug & Play this sturdy metal switch for reliable high-speed network connectivity. ...

The 2-Port USB (Universal Serial Bus) KVM Switch lets you manage two PCs with just one set of keyboard, monitor, & mouse. Switch between two PCs with a simple press of a button! Separate sets of KVM cables are included with the KVM Switch, so users can start controlling 2 PCs instantly. The KVM cables also provide power to the KVM Switch, eliminating the need for a power adapter. Hot Key operations provide immediate access to features such as computer switching, & auto-scanning. With its Hot-Plug, & Audible Feedback, the 2-Port USB (Universal Serial Bus) KVM Switch is the perfect choice for managing multiple PCs. Features 2-port KVM switch with VGA & USB (Universal Serial Bus) connection to computers Device monitoring with Auto-Scan & audible feedback High quality 2048x 1536 resolution for a crisp display Supports most operating systems & advance mouse designs All required cabling included Use one keyboard, monitor, & mouse to control two computers USB Keyboard/ Mouse emulation with 2-set of detachable KVM Cables Supports Microsoft Intellimouse, Optical Mouse, Logitech Net Mouse & more Supports super High Video Quality, up to 2048 x 1536 VGA resolution Supports Windows 98/98SE/ME/2000/XP/2003 Server, Linux, & Mac OS Multi-Platform support for PCs, Macintosh G3/G4, i Mac & Mac Mini Hot-Plug pluggable. Adds PC or removes the connected PCs for maintenance without powering down the KVM Switch or other PC’s Switches PC by hot-keys, push button or windows-base client switch software. Auto-Scan & LED display for easy status monitoring User definable hot-key (Windows Only) USB Interface Power method 2-year limited warranty ...