Product Description Trend helical cutter 50/05 Tooling for use on webbed aluminium & UPVC extrusions by window & door fabricators. Cutters are produced in special high speed steel (HSSE) to ensures a clean cut & resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge & machine or mill lateral slots All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clampedm tooling should be used with a coolant, wax stick or lubricant.HSSE. One Flute helical Plunge-slotting bit 8mm Shank.D = 5 mm C = 12 mm OL = 60 mm Product Description Trend 50/05 x 8mm HSSE Helical Plunge Bit 5 mm TRE50058HSETooling for use on webbed aluminium & UPVC extrusions by window & door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut & resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge & machine or mill lateral slots All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clampedm tooling should be used with a coolant, wax stick or lubricant.HSSE. One Flute helical Plunge-slotting bit 8 mm Shank.D = 5 mm C = 12 mm OL = 60 mm TRE50058HSE ...

These combination tools in TCT can be used in abrasive materials. They will drill countersink & finally counterbored a parallel hole. Designed to receive plug maker group 24. The drill diameter sizes are for a clearance hole only. For use with drilling machines or routers. T.C.T.1/4 in. Shank. Woodscrew Size. No. 10. Drill Diameter 7/32 in. Countersink Diameter. 12 mm. Drill Length. 20 mm. ...

These well proven adjustable countersinks are all supplied complete with an HSS twist drill & a hexagon key. They are designed to drill & countersink simultaneously a wide variety of materials. Choose TCT for abrasive materials. NOT SUITABLE FOR FERROUS & NON FERROUS METALS.T.C.T. No. 6 Woodscrew Diameter 1/2 in. Drill Diameter. 5/32 in. O/L 1.1/4 in. ...

These well proven adjustable countersinks are all supplied complete with an HSS twist drill & an allen key. They are designed to drill & countersink simultaneously a wide variety of materials. Choose TCT for abrasive materials. NOT SUITABLE FOR FERROUS & NON FERROUS METALS. T.C.T. No. 8 Wooscrew. Diameter: 5/8 in. Drill Diameter: 3/16 in. Overall Length: 1.1/4 in. ...

These cutters are specifically designed for producing rebats & strip recesses. The pin guides follow the straight or curved workedge to give a pre-set width of rebate. Applications include furniture & cabinet making, picture frames, door & window fames & instrument making, especially when a small rebate is required for insertion of purfling. Tooling: TC. 1/4 in. Shank. E = 12.7 mm. C = 14 mm. ...

Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops chair legs & frames. They can also be used to produce complete round over profiles for window boards, & stair tread nosings. Cutters can be combined to form compounded one-off mouldings for individual applications. Tooling T.C.T. 1/2in Shank. R = 4.8 mm, D = 28 mm, d = 25.7 mm, B = 16 mm. ...

Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops chair legs & frames. They can also be used to produce complete round over profiles for window boards & stair tread nosings. Cutters can be combined to form compounded one-off mouldings for individual applications. Tooling T.C.T. 1/2 in Shank. R = 7 mm. D = 31.9 mm. D = 28.6 mm. B = 16 mm. ...

Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops chair legs & frames. They can also be used to produce complete round over profiles for window boards & stair tread nosings. Cutters can be combined to form compounded one-off mouldings for individual applications. Tooling T.C.T.1/4 in. Shank. R = 7 mm. D = 31.9 mm. D = 28.6 mm. B = 16 mm. ...

Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops chair legs & frames. They can also be used to produce complete round over profiles for window boards & stair tread nosings. Cutters can be combined to form compounded one-off mouldings for individual applications. Tooling T.C.T. 1/2 in Shank. R = 9.5 mm. D = 38.1 mm. D = 34.7 mm. B = 16 mm. ...

Aquamac 63 strip is fitted into the window frame aperture using four cut lengths. It is important to create tight butt or notched joints to ensure high levels of window performance. Joints can be enhanced by the application of a small amount of silicone mastic. When fitted it is necessary to notch the seal end. Returns to original shape after compression. Stretching & shrink back at corners avoided. Suitable for all main timber. Low compression force helps ease window & door operation. Maintains weathering characteristics & resists compression set over a wide temperature range +-70 C to
- 30 C. Research has proved that Aquamac TM Weatherseal gives high levels of sound reduction. Unaffected by paint stains window & door types. Size 25 metre (approx. length) Colour Brown.
...