About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

Trend 46/94 X 1/2 Tungsten Carbide Guided Profiler
Trend 46/94 X 1/2
Tungsten Carbide
Guided Profiler
£38.99
Profilers with Shank mounted bearings for guidance for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight & curved work. For profiling & rebating applications only. NOT for plunge cutting or grooving. A 3 mm. approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide 1/2 in Shank. Angle A = 90 D = 19.1 mm. C = 25.4 mm. ...
Available
Trend 46/95 X 1/4 Tungsten Carbide Template Profiler
Trend 46/95 X 1/4
Tungsten Carbide
Template Profiler
£24.50
Profilers with Shank mounted bearings for guidance for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight & curved work. For profiling & rebating applications only. NOT for plunge cutting or grooving. A 3 mm. approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. A 3 mm. approximate overlap should be left before copy profiling also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide. 1/4 in. Shank. Angle A = 90 D = 12.7 mm. C = 25.4 mm. ...
Available
image missing
Trend 50/19 X 8 Mm.
Hsse Speed Steele
Helical Plunge Bit 5
Mm
£20.00
Tooling for use on webbed aluminium & UPVC extrusions by window & door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut & resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge & machine or mill lateral slots. All aluminium tooling should be used with a coolant wax stick or lubricant. Material should be securely clamped, tooling should be used with a coolant wax stick or lubricant. HSSE. One Flute helical Plunge-slotting bit. 8 mm. Shank. D = 4 mm. Diameter: C = 16 mm. Depth of Cut. OL = 90 mm. ...
Available
Trend 50/51 X 8 Mm. Hsse Helical Plunge Bit 8 Mm
Trend 50/51 X 8 Mm.
Hsse Helical Plunge
Bit 8 Mm
£20.99
Tooling for use on webbed aluminium & UPVC extrusions by window & door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut & resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge & machine or mill lateral slots. All aluminium tooling should be used with a coolant wax stick or lubricant. Material should be securely clamped, tooling should be used with a coolant wax stick or lubricant. HSSE. One Flute helical Plunge-slotting bit. 8 mm. Shank. D = 8 mm. C = 14 mm. OL = 120 mm. ...
Available
Trend 5005 X 14 Hsse Helical Plunge Bit 5 Mm
Trend 5005 X 14 Hsse
Helical Plunge Bit 5
Mm
£17.00
Product Description Trend helical cutter 50/05 Tooling for use on webbed aluminium & UPVC extrusions by window & door fabricators. Cutters are produced in special high speed steel (HSSE) to ensures a clean cut & resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge & machine or mill lateral slots All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clampedm tooling should be used with a coolant, wax stick or lubricant.HSSE. One Flute helical Plunge-slotting bit 8mm Shank.D = 5 mm C = 12 mm OL = 60 mm Product Description Trend 50/05 x 1/4 HSSE Helical Plunge Bit 5 mm TRE500514HSETooling for use on webbed aluminium & UPVC extrusions by window & door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut & resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge & machine or mill lateral slots All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clampedm tooling should be used with a coolant, wax stick or lubricant.HSSE. One Flute helical Plunge-slotting bit 8 mm Shank.D = 5 mm C = 12 mm OL = 60 mm TRE500514HSE ...
Available
Trend 62/10 X 1/4 Tungsten Carbide Drill / Countersink /counterbore
Trend 62/10 X 1/4
Tungsten Carbide Drill
/
Countersink /counterbore
£36.50
These combination tools in TCT can be used in abrasive materials. They will drill countersink & finally counterbored a parallel hole. Designed to receive plug maker group 24. The drill diameter sizes are for a clearance hole only. For use with drilling machines or routers. T.C.T.1/4 in. Shank. Woodscrew Size. No. 10. Drill Diameter 7/32 in. Countersink Diameter. 12 mm. Drill Length. 20 mm. ...
Available
image missing
Trend 6200/6 Tungsten
Carbide Countersink
Set
£20.50
These well proven adjustable countersinks are all supplied complete with an HSS twist drill & a hexagon key. They are designed to drill & countersink simultaneously a wide variety of materials. Choose TCT for abrasive materials. NOT SUITABLE FOR FERROUS & NON FERROUS METALS.T.C.T. No. 6 Woodscrew Diameter 1/2 in. Drill Diameter. 5/32 in. O/L 1.1/4 in. ...
Available
image missing
Trend 6200/8 Tungsten
Carbide Countersink
Set
£23.50
These well proven adjustable countersinks are all supplied complete with an HSS twist drill & an allen key. They are designed to drill & countersink simultaneously a wide variety of materials. Choose TCT for abrasive materials. NOT SUITABLE FOR FERROUS & NON FERROUS METALS. T.C.T. No. 8 Wooscrew. Diameter: 5/8 in. Drill Diameter: 3/16 in. Overall Length: 1.1/4 in. ...
Available
image missing
Trend 8d/3 X 1/4
Tungsten Carbide Pin
Guide Rebater
£35.99
These cutters are specifically designed for producing rebats & strip recesses. The pin guides follow the straight or curved workedge to give a pre-set width of rebate. Applications include furniture & cabinet making, picture frames, door & window fames & instrument making, especially when a small rebate is required for insertion of purfling. Tooling: TC. 1/4 in. Shank. E = 12.7 mm. C = 14 mm. ...
Available
Trend 9/71 X 1/4 Tungsten Carbide Corner Bead Cutter
Trend 9/71 X 1/4
Tungsten Carbide
Corner Bead Cutter
£35.99
Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops chair legs & frames. They can also be used to produce complete round over profiles for window boards & stair tread nosings. Cutters can be combined to form compounded one-off mouldings for individual applications. Tooling T.C.T.1/4 in. Shank. R = 3.2 mm. D = 22 mm. D = 18.9 mm. B = 12.7 mm. ...
Available

Trend 5005 X 8mm Hsse Helical Plunge Bit 5 Mm

Product DescriptionTrend helical cutter 50/05Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensures a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slotsAll aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clampedm tooling should be used with a coolant, wax stick or lubricant.HSSE.One Flute helical Plunge-slotting bit8mm Shank.D = 5 mmC = 12 mmOL = 60 mmProduct DescriptionTrend 50/05 x 8mm HSSE Helical Plunge Bit 5 mm TRE50058HSETooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high
speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slotsAll aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clampedm tooling should be used with a coolant, wax stick or lubricant.HSSE.One Flute helical Plunge-slotting bit8 mm Shank.D = 5 mmC = 12 mmOL = 60 mmTRE50058HSE
Buy
Availability: In Stock
£14.50
computer components DEFAULT
Description Reviews / Comments Add New

Product Description

Product Description Trend helical cutter 50/05 Tooling for use on webbed aluminium & UPVC extrusions by window & door fabricators. Cutters are produced in special high speed steel (HSSE) to ensures a clean cut & resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge & machine or mill lateral slots All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clampedm tooling should be used with a coolant, wax stick or lubricant.HSSE. One Flute helical Plunge-slotting bit 8mm Shank.D = 5 mm C = 12 mm OL = 60 mm Product Description Trend 50/05 x 8mm HSSE Helical Plunge Bit 5 mm TRE50058HSETooling for use on webbed aluminium & UPVC extrusions by window & door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut & resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge & machine or mill lateral slots All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clampedm tooling should be used with a coolant, wax stick or lubricant.HSSE. One Flute helical Plunge-slotting bit 8 mm Shank.D = 5 mm C = 12 mm OL = 60 mm TRE50058HSE

Reviews/Comments

Add New

Intelligent Comparison

Available
Trend 5005 X 14 Hsse Helical Plunge Bit 5 Mm
Trend 5005 X 14 Hsse Helical Plunge Bit 5 Mm Ebuyer Business
£17.00
Available
Trend 50/51 X 8 Mm. Hsse Helical Plunge Bit 8 Mm
Trend 50/51 X 8 Mm. Hsse Helical Plunge Bit 8 Mm Ebuyer Business
£20.99
Available
image missing
Trend 50/19 X 8 Mm. Hsse Speed Steele Helical Plunge Bit 5 Mm Ebuyer Business
£20.00

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Aluminium - Corrosion resistant lightweight metal
Steel - An alloy made predominately of Iron combined with <2% carbon
speed - A measurement of how fast an object travels between two points
Mill - A building which can grind grain into flour.
Flute - A long silver instrument with buttons to press to make different notes.
Wax - A yellow mouldable substance typically used to polish or protect things e.g. fruit.

Supplier Information

Ebuyer Business
Get ready to power up your tech game with Ebuyer (https://www.ebuyer.com/)! Explore a vast selection of the latest gadgets, electronics, and computing essentials at unbeatable prices. From cutting-edge laptops and gaming PCs to home appliances and office supplies, we've got everything you need to stay connected and productive. With fast delivery and top-notch customer service, Ebuyer is your go-to destination for all things tech. Don't settle for less – shop now and take your tech game to the next level with Ebuyer!
Page Updated: 2024-02-28 09:26:27

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu