The ST124UTPEA is the 4 Port Extender Transmitter unit utilized by Star Tech.com STUTPEA VGA & Audio over Cat 5 extension series. This convenient video distribution system simplifies implementing digital signage solutions by allowing a single VGA source & corresponding audio to be broadcast to multiple displays at up to 300m (950ft) away. Comprised of this 4 port VGA & Audio extender unit or an 8 port VGA & Audio extender unit (ST128UTPEA) & one STUTPEALR Receiver Unit or STUTPRXWLA wall-plate receiver per display as necessary, the VGA & Audio extension series can transmit a single VGA output & corresponding audio to four or eight displays/receivers over standard Cat 5 UTP cable. For even more versatility, the VGA & Audio over Cat 5 Line Splitter (STUTPEA4X) can be used to multiply the number of potential displays by four
- allowing the VGA signal & accompanying audio to be broadcast to up to 16 or 32 VGA displays.
...

The ST128UTPE 8 Port VGA Video Extender over Cat 5 (UTPE Series) allows up to 9 (1 local & 8 remote) monitors to be connected to a single VGA source. The video signal is carried to the remote monitors over standard 4 pair Category 5 & Category 6 UTP cable using RJ45 connectors & supports distances of up to 300m / 950ft. At each remote monitor an STUTPRXL receiver (see accessories) is required. The receiver unit converts the signal from the UTP cable back into VGA video for the monitor. Backed by a Star Tech.com 2-year warranty & free lifetime technical support. Works with the STUTPRXL receiver, or the STUTPRXWAL (wall-plate receiver) for flexibility in your setup. Extends the connection distance of VGA displays by up to 950 feet (300 meters) offering flexibility in the placement of your equipment. Cat 5 extension design means that you can make use of existing Cat 5 or better wiring infrastructure. ...

The ST124WGB 4 port wall-mountable VGA video splitter offers outstanding quality & distance, allowing you to deliver high resolution VGA video from a single video source to up to four monitors simultaneously. Supporting a maximum VGA video bandwidth of up to 250 M Hz & resolutions up to 1600 x 1200, the device is sure to deliver on image quality. The wall-mountable multi-display VGA video splitter is very simple to install, allowing you to locate screens up to 65m (210ft) away from the VGA video source. The video splitter provides versatile installation options, with top-side connection ports the unit can lay flat on or under your workspace, or you have the option to mount the splitter on a wall making it easy to position the VGA splitter as needed. A scalable video splitting solution, the device also means that you can cascade the signal using two additional splitters for broadcast from a single VGA source to up to 64 VGA monitors. Typical applications of this product would include digital signage, retail & tradeshow environments, educational & government facilities, or corporate displays where high quality multi-monitor VGA video is required. ...

Stand out in a crowd & impress your audience with multi-screen presentations! Star Tech.com's ST124L allows a computer to display VGA video on four monitors simultaneously. Perfect for classrooms, tradeshows, or in-store displays where high quality video on several monitors is needed. The ST124L supports displays with up to 250 MHz of bandwidth, providing brilliant 1920x 1440 resolution. A built-in booster circuit lets you locate screens up to 210 ft away from your system, plus easy plug & play installation lets you take your show anywhere & set up in seconds. Backed by Star Tech.com's 1-year warranty & free lifetime tech support. ...

This 15ft four-in-one DVI/USB KVM cable integrates dual link DVI video quality with USB (Universal Serial Bus) mouse & keyboard, 3.5mm audio out & microphone connections into a single, compact cable. The 4-in-1 KVM cable is a cost-effective & convenient solution that's suitable for use with dual link DVI supported USB (Universal Serial Bus) KVM switches, allowing you to share a USB (Universal Serial Bus) peripheral set between two computers configured for high definition output. The DVI/USB KVM cable provides guaranteed performance for dependable operation. Meets & exceeds all DVI-D & USB (Universal Serial Bus) 2.0 specifications Dual Link DVI-D signal is supported Combines 4 peripheral cables into one Supports DVI-D Maximum clock frequency in dual link mode up to 7.92 Gbit/s) ...

This 10ft four-in-one DVI/USB KVM cable integrates dual link DVI video quality with USB (Universal Serial Bus) mouse & keyboard, 3.5mm audio out & microphone connections into a single, compact cable. The 4-in-1 KVM cable is a cost-effective & convenient solution that's suitable for use with dual link DVI supported USB (Universal Serial Bus) KVM switches, allowing you to share a USB (Universal Serial Bus) peripheral set between two computers configured for high definition output. The DVI/USB KVM cable provides guaranteed performance for dependable operation. Compact 4-in-1 construction for clean & discrete connections Supports DVI-D Dual Link video for the highest digital resolution through a KVM Combines 4 peripheral cables into one Dual Link DVI-D signal is supported Backwards compatible with DVI-D single link signals & devices Supports HDTV quality signal & above (2560 x 1600 @ 60 Hz & higher resolutions at lower refresh rates) Meets & exceeds all DVI-D & USB (Universal Serial Bus) 2.0 specifications Supports DVI-D Maximum clock frequency in dual link mode up to 7.92 Gbps) ...

This 6ft 4-in-1 USB (Universal Serial Bus) DVI KVM switch cable provides DVI video, USB (Universal Serial Bus) mouse & keyboard, 3.5mm audio, & 3.5mm microphone connections, all in a single, compact cable. The 4-in-1 KVM cable is a cost-effective & convenient solution that's suitable for use with DVI supported USB (Universal Serial Bus) KVM switches, allowing you to share a USB (Universal Serial Bus) peripheral set between two computers configured for high definition output. Combines 4 peripheral cables into one Supports a maximum resolution of 1920x 1200 Meets & exceeds all DVI-D & USB (Universal Serial Bus) 2.0 specifications Works with Aten models (CS1642, CS1644, CS1784, CS1782, CS1762, CS1764), Avocent models (2SVDVI10-001, 4SVDVI10-001, SV4UAD, SC420, SC440, SC540), Belkin models (F1DN102D, F1DN104D, F1DD102L, F1DD104L), Cables to go models (52047, 52048). Please note: networking components such as switches, routers, KVM & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

This 4 port HDMI Switch lets you connect up to four HDMI output devices to a single HDMI input
- eliminating the need to manually
...

If you have a mini network of PC’s set up in the office or at home & need to connect each one to a printer, scanner or any other USB (Universal Serial Bus) peripheral this push-button unit from Star Tech is the ideal solution. It is an easy out-of-the-box way to share a USB (Universal Serial Bus) 2.0 device between up to four different computers without having to go through the hassle of connecting & disconnecting the gabling every time you switch computers. As Easy As It Gets The Star Tech peripheral sharing switch needs no external power adapter & with a width of just 5cm & weighing just 80grams the unit takes up no room at all & is easily portable if required. Switching devices between computers is straightforward with the simple push-button controls & the additional keyboard hot-keys. Everything You Need The unit is quick to install & everything you need is in the box including the cable, Software CD & an easy to understand instruction manual. Reasons To Buy The Star Tech 4 to 1 USB (Universal Serial Bus) Peripheral Sharing Switch Connect up to four computers to your USB (Universal Serial Bus) 2.0 device Push-button controls Easy to use Two year warranty Unlimited technical support from Star Tech ...

Allows connection of a SATA device to an IDE motherboard or card A compact form factor to fit into almost any installation & no driver installation for true plug & play installation Backed by a lifetime warranty & free lifetime technical support Allows connection of a SATA device to an IDE motherboard or card
- This IDE to SATA adapter converts a 40-pin IDE connector to a SATA connector, allowing you to connect a 2.5in or 3.5in SATA (SATA, SATA II/SATA 300) drive to the motherboard in place of an IDE drive. The IDE to SATA Adapter is suitable for installation in any computer case, as it is requires minimal space & does not impact airflow. WhatÂ’s in the box IDE to SATA Adapter Y Cable (LP4 to LP4 + SP4) SATA Cable Instruction Manual
...