More From Contributor

£50.09
Simple elegance combined with maximum functionality The Mask is a spacious ATX case in a reduced & timeless design. The bezel has an aluminium-optic finish, while the door in the front ensures independent installation of hard drives for an always discreet look. Generous space available With a generous width of 210 mm, smooth installation of tower coolers with a height of up 170 mm is possible. The Mask case offers, in addition, a variety of possibilities for the installation & inconspicuous wiring of all components. Extra-long graphics cards up to a maximum of 41.5 cm can be installed due to the modular hard drive management. Even at maximum capacity with 2.5" hard drives/SSDs, the Mask still provides sufficient room for VGA cards up to 32.5 cm in length. Fan Configuration Behind the discreetly designed air intakes in the front, there are two preinstalled 120 mm low noise fans & an additional 120 mm fan on the back. Thus, the Mask is well prepared for the cooling of high-performance components. Front ports Two USB (Universal Serial Bus) 3.0 ports, two audio ports as well as two USB (Universal Serial Bus) 2.0 ports are quickly accessible & discreetly hidden behind two flaps on the top of the front panel. In the event that the motherboard does not have an internal USB (Universal Serial Bus) 3.0 connector, the two USB (Universal Serial Bus) 3.0 interfaces can also be optionally connected & operated in USB (Universal Serial Bus) 2.0 mode. Installation options for drives The case features two 5.25" drive bays for the screwless installation of optical drives. For the installation of card readers or other devices in a 3.5" format, a slot is available. Up to three 3.5" hard drives as well as four 2.5" hard drives/SSDs can be mounted without screws with the enclosed rails in the rack system. in addition, if required, another 2.5" SSD/hard drive can be fastened to the case floor.

Features:
ATX case 2x 5.25" drive bays (external) 1x 3.5" drive bay (external) 4x 2, 5" drive bays for hard drives/SSDs (rack-mounted system) in modular design 3x 3.5" hard drive bays (rack-mounted system) 1x 2.5" installation option for hard drives/SSDs (rack-mounted system) Installation rails for hard drives/SSDs (3x 3.5", 4x 2.5") included Top I/O: 2x USB (Universal Serial Bus) 3.0 (internal 19-pin mainboard connector incl. USB2.0 plug), 2x USB (Universal Serial Bus) 2.0, 2x Audio Quick fasteners for ODDs 2 openings for water coolers Cable management system Dimensions: 490 x 210 x 450 mm (L x W x H) Weight: ~6.0kg Fan configuration: Case front 2x 120 mm fan (preinstalled) Backside 1x 120 mm fan (preinstalled) Compatibility: Max. Length, graphics cards 32.5/41.5 cm (when removing middle hard drive cage) Max. Height, CPU cooler 17.0 cm Max. Length, power supply 30 cm

...
Available
£14.56
Duck, roll, pull out a weapon, shoot “ in combat there are always moments when you have to press multiple keys simultaneously. The Skiller offers you an 18 key Rollover Function “ so no command remains in the distance. Youre fighting on different fronts & always need a personalized combat environment. The Skiller can be individually configured with the included software: Every single key can be assigned functions, shortcuts, or entire command sets “ for every game, every mission, & every other program. Strap yourself into the battle! Trust in the precision & function variety of your Skiller keyboard. Features (keyboard): ¢3-block standard gaming keyboard ¢20 additional multimedia keys ¢8 swappable gaming keys ¢ Additional customization software ¢ Supported operating systems: Windows XP/ Vista/7/8 (32 & 64 bit) Connection USB (Universal Serial Bus) Cable length 150 cm Number of keys 104+20 multimedia keys Multi-Key Rollover Max. 18 keys

Dimensions (Lx Wx H) 485x 212x 25 mm Weight 764 g Specifications (keyboard): Input power (DC) 5 V Operating life cycles of keys 10 million key presses Operating temperature 0°C ~ +50°C Storage temperature -22°C ~ +65°C Features (software): ¢ Special customization software for games & other applications (e.g. Photoshop, Windows, browser etc.) ¢18-Key Rollover support ¢ Fully programmable keys ¢ Supports 10 different profiles with 3 layers each ¢ Programmable keys can record: macros, macro loops, media functions, internet functions, keystrokes, mouse functions, delay time etc.

...
Available
£56.98
The T28 series

Includes::
three ATX cases in which the mainboard mount, slot apertures, quick-fastener levers

...
Available
£56.98
The T28 series

Includes::
three ATX cases in which the mainboard mount, slot apertures, quick-fastener levers

...
Available
£56.98
The T28 series

Includes::
three ATX cases in which the mainboard mount, slot apertures, quick-fastener levers

...
Available
£56.98
The housings of the T9 value series are three ATX cases in various colours: Apart from the main board mount, the slot faceplates ...
Available
£54.03
With the housings of the T9 value series we compliment our collection with three ATX cases in various
Colours:
...
Available
£54.99
With the housings of the T9 value series we compliment our collection with three ATX cases in various
Colours:
...
Available
£49.98
With the housings of the T9 value series we compliment our collection with three ATX cases in various
Colours:
...
Available
£26.86
After the success of our Vaya case we now proudly present, with a new & exciting look, the Vaya II. Like its predecessor it has many advantages “ plus looks quite awesome “ at a low price. The high-quality black finish on both the outside & inside shows our premium workmanship. An extensive set of accessories are supplied in the Vaya II. Generous Space With its considerable amount of width the Vaya II has more room than its competitors for installing cooling towers of up to a maximum height of 16.5 centimeters. Graphics cards with a length of up to 26.5 centimeters will easily fit within the case, as well. The maximum size for the power supply is an enormous 28 centimeters in length. Customize your fan The pre-installed 120 mm LED fan turns the case into a deep & powerful blue. This pre-installed fan ensures the optimal cooling of your system. If the airflow inside the case needs to be increased, we offer the option to install another 80 mm or 120 mm fan on the backside of the case. Ports on the front Two USB (Universal Serial Bus) 2.0 ports & two Audio ports on the front of the case always ensure easy & fast access for external hardware. Installation of drives This ATX case has space for four 5.25" devices & another 3.5" device, which can be accessed externally. This slot is often used for a card reader. Furthermore, there is still room for another four 3.5" devices & an additional 2.5" SSD/HDD at the bottom of the case. Every device is secured with our quick-release fasteners.

Features:
ATX case 4x 5.25" drive bays 4x 3.5" HDD bays (internal) 1x 3.5" drive bay (external) 1x 2.5" installation option for hard drives/SSD (internal) Front I/O: 2x USB (Universal Serial Bus) 2.0, 2x Audio Black interior finish 7 Slots for expansion cards Plastic front panel with mesh air intake Quick fasteners for optical drives & HDDs, mainboard mounting panel with installation opening for coolers 3 openings for water cooling Cable management system Dimension: 470 x 205 x 437 mm (L x W x H) Weight: ~5kg Fan configuration: Case front: 1x 120 mm LED fan (pre-installed) Side panel: 1x 120 mm fan (optional) Rear panel: 1x 80 mm or 120 mm fan (optional) Color versions: Black case (fan LED blue) Compatibility: Max. length graphics card: 26.5 cm Max. height CPU cooler: 16.5 cm Max. length PSU: 28 cm Package content: ¢ ATX case Vaya II ¢ Accessory kit

...
Available

Sharkoon T9 Value Black ATX Midi Tower

With the housings of the T9 Value series we compliment our collection with three ATX cases in various colors: Apart from the main board mount, the slot faceplates and the quick locking mechanisms are also colored from the otherwise black interior features. The color variations offered for the Value Edition are bright red, poisonous green and modern white. For the lovers of classical style naturally a Value model in black is available. The chief attraction of the colored versions: The three pre-installed LED fans of the Value edition in the color of interior finish - the black model comes with three non-illuminating fans. With the finishing - and later for the built-in hardware - the side panel contains an effective acrylic window. Two of the pre-installed 120 mm fans are in the front
bezel, the third is installed in the backside of the case. Thus they ensure a continuous, refreshing air flow through the center of the computer in which the intensive heat of the components can build. In order to further optimize this air flow, the case has a sophisticated cable management system which permits space saving and orderly relocation of the internal power and data cables. The top of the front bezel contains an easy to reach I/O panel with a USB3.0, three USB2.0 and two audio ports. The interfaces are framed by blue LEDs for power (both sides) and hard drive activity (only on one side), the color also matches the interior finish. The T9 Value case offers nine continuous 5.25" drive bays in which the optical drives can be attached through the quick locking mechanisms. For
the installation of 3.5" devices the accessory set offers suitable mounting brackets. Features ATX case Acrylic side panel 9x 5.25" drive bays Top I/O with 1x USB3.0, 3x USB2.0, 1x headphone and 1x microphone connector, power and reset button 7 slots for add-on cards Mesh front panel Quick fasteners for optical drives, mainboard mounting panel with installation opening for coolers 2 openings for water cooling Cable management system Fan configuration: Case front - 2x 120 mm fan with LED as well as 3-pin and 4-pin connector (pre-installed) Rear panel - 1x 120 mm fan with LED as well as 3-pin and 4-pin connector (pre-installed)
Availability: In Stock
£53.44

Product Description

With the housings of the T9 value series we compliment our collection with three ATX cases in various
Colours: Apart from the main board mount, the slot faceplates & the quick locking mechanisms are also colored from the otherwise black interior features. The color variations offered for the value Edition are bright red, poisonous green & modern white. For the lovers of classical style naturally a value model in black is available. The chief attraction of the colored versions: The three pre-installed LED fans of the value edition in the color of interior finish
- the black model comes with three non-illuminating fans. With the finishing
- & later for the built-in hardware
- the side panel contains an effective acrylic window. Two of the pre-installed 120 mm fans are in the front bezel, the third is installed in the backside of the case. Thus they ensure a continuous, refreshing air flow through the center of the computer in which the intensive heat of the components can build. In order to further optimize this air flow, the case has a sophisticated cable management system which permits space saving & orderly relocation of the internal power & data cables. The top of the front bezel contains an easy to reach I/O panel with a USB3.0, three USB2.0 & two audio ports. The interfaces are framed by blue LEDs for power (both sides) & hard drive activity (only on one side), the color also matches the interior finish. The T9 value case offers nine continuous 5.25" drive bays in which the optical drives can be attached through the quick locking mechanisms. For the installation of 3.5" devices the accessory set offers suitable mounting brackets. Features ATX case Acrylic side panel 9x 5.25" drive bays Top I/O with 1x USB3.0, 3x USB2.0, 1x headphone & 1x microphone connector, power & reset button 7 slots for add-on cards Mesh front panel Quick fasteners for optical drives, mainboard mounting panel with installation opening for coolers 2 openings for water cooling Cable management system Fan configuration: Case front
- 2x 120 mm fan with LED as well as 3-pin & 4-pin connector (pre-installed) Rear panel
- 1x 120 mm fan with LED as well as 3-pin & 4-pin connector (pre-installed)

Reviews/Comments

Add New

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

LED - Light Emitting Diode - a small light source
Acrylic - A type of plastic
Black - A colour which does not emit any colour of the spectrum. Black absorbs all frequencies of the spectrum.
White - A colour combining all colours
Computer - A programmable electronic machine which stores and manipulates data.
Blue - A primary colour
Heat - A term used to define thermal energy
Button - A round or square object used for fastening clothing or other items
water - A chemical substance. Chemical formula H2O.
button - A small fastener used on clothing to secure two pieces of fabric together.
Cable - A series of wires bonded to form a single thread
Red - One of the three primary colours
Microphone - A device for recording sounds. Also known as a mic.
MIDI - Musical Instrument Digital Interface - an industry standard to allow devices and musical instrument to interact.
Audio - Also known as sound. An audible vibration wave which can be heard.
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Quick - Something that is fast
Components - Multiple items used to complete the product.
LED - Light Emitting Diode. A bulb that is very efficient at producing light. Often small.
Accessory - An item that can contribute to an activity or process to enhance its look or performance.
Accessory - An item that is added in order to make the original item more useful or attractive.
Interior - The inside of something, usually what is not visible.
Sophisticated - Something that is a high level of complexity, can relate to a persons personality.
Slots - A narrow opening which something can be inserted into, or a machine commonly found in casinos to win money and tokens.
Mesh - A material mad up of crossed over fibres such as metal or thread.
Fan - A piece of equipment that has blades that rotate to cool the air, can be installed within other equipment,
Model - A representation of a person or thing, usually smaller scale. It can also be a person that wears clothing.

Supplier Information

Ebuyer Business
Get ready to power up your tech game with Ebuyer (https://www.ebuyer.com/)! Explore a vast selection of the latest gadgets, electronics, and computing essentials at unbeatable prices. From cutting-edge laptops and gaming PCs to home appliances and office supplies, we've got everything you need to stay connected and productive. With fast delivery and top-notch customer service, Ebuyer is your go-to destination for all things tech. Don't settle for less – shop now and take your tech game to the next level with Ebuyer!
Page Updated: 2024-02-28 09:26:27

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu