This Drum is good for printing 25000 pages, on average. Average page coverage is 5% of toner per page (compared to white space on the paper), which is the standard Pitney Bowes

Specification for this drum, & a standard measuring term for the consumer printing industry.

...

The Peerless Industries SP746PU Pivot Wall Mount is designed to give you the best viewing positions for your flat-panel displays ranging from 26 to 46" (66 to 116 cm) & weighing up to 80 lb (36 kg). Pivoting functionality allow you to move the screen smoothly for a wide variety of adjustable screen positions, when full articulation is not required. The arm extends your screen up to 12.55" (31.9cm) from the wall & offers a side-to-side motion of 90 degrees, enabling unlimited viewing positions. In addition, the mount features 1-touch tilt mechanism up to +15/-5° & up to ±5° roll support in screen leveling. Integrated cable management hides the cable, providing a clean clutter-free look to any installation. Designed to give you the best viewing positions for your flat-panel displays ranging from 26 to 46" (66 to 116 cm) Load capacity up to 80 lb (36 kg) Pivoting functionality allow you to move the screen smoothly for a wide variety of adjustable screen positions, when full articulation is not required Extends your screen up to 12.55" (31.9cm) from the wall Offers a side-to-side swivel up to 90 degrees Features 1-touch tilt mechanism up to +15/-5° ±5° roll support in screen leveling Integrated cable management hides the cable, providing a clean clutter-free look to any installation Compatibility with up to VESA 400 x 400 mm mounting hole pattern ...

Arm extends 7.01" from the wall & retracts to 1.88" to save space Pre-tensioned tilt mechanism offers up to ±35° of one-touch tilt angle adjustment; ±5° of roll to level screen horizontally Integrated cable management keeps cables & cords out of the way Weight Capacity: 25 lb, UL listed VESA 75 & 100 compliant. ...

The Smart Mount Pivot Wall Arm is ideal for applications that require easy side-to-side swivel & tilt. This single link arm extends out 7" & provides easy one-touch tilt for limitless viewing positions. Its anodized aluminum finish complements offices, conference rooms or any room in the home. For easy installation, this mount comes completely pre-assembled with all necessary mounting & screen attachment hardware. Comes with VESA 75/100 screen adapter plate Two tension able pivot points for virtually limitless adjustments ±35° of tilt & ±7° of roll for flexible viewing positions Offers up to 90° of swivel Anodized aluminum finish in black or silver

Includes:: hardware for installation to a single wood stud or concrete Non-VESA adapter plates available

...

The cards are transparent, the art is black & the stack is six cards deep. Can you spot all six pix within the mix. Cards are stacked & stowed in unique window holders, revealing a tangle of angles & a clutter of curves. Players have 30 seconds to identify & record the individual pictures within each mix. Race through all the holders & earn a point for every correctly-identified image. It takes a keen eye & quick thinking to win this line art jumble! How many pictures can you identify. Players will sharpen their ability to analyse, break down & differentiate shapes through this speedy game of scrutiny. You have 30 seconds to identify all six pix within each envelope. For 2. 4 players, ages 8. ...

Pixie Plus (PXE-DCM+) The Pixie Plus Device Control Module provides a simple, standardized control interface for projectors, monitors, display devices, or other AV devices in a compact single-gang form factor. A customizable interface allows for a variety of configurations from two to eight total buttons. The unique design gives you the ability to tailor the control interface to the exact requirements of the devices being controlled. This design not only provides a professional looking control system, but means that you can eliminate any buttons that may confuse the end user. Seven button insert modules are included with each Pixie Plus. You choose the three modules that match your remote control design. IR programming without PC. With standalone IR learning, the Pixie Plus can learn the IR remote control codes of your devices in minutes. No programming is necessary, so leave the laptop at home. Duplicate rooms are a snap. Simply teach one Pixie Plus the codes from the remote control, & any other Pixie Plus will wirelessly clone its configuration in seconds. Protect your investment. Display devices are expensive. If users inadvertently leave the display on, you will unnecessarily have costly lamp replacements. The Pixie Plus offers three options for automatic shutdown of the device. If the display has discrete power commands (ON/OFF) the Pixie Plus can be configured to turn the display off after a certain period of inactivity (based on time since the last key was pressed). If you use the optional real-time clock module the Pixie Plus can be configured to turn off the device at an exact time of day, or a hybrid approach can be used that enables the automatic shutdown timer at a specific time of day giving you the best of both approaches. The real time clock module is accurate to within five minutes per year, will keep time through power outages, & supports daylight saving time. Protect your system from unauthorized use. At your option, the Pixie Plus can be configured to only allow user control after a security code has been entered. This security code is a sequence of button presses that you can configure to be any combination of keys. Easy to install. Use the optional Basic Installation Kit (PXE-BIK50) to install the Pixie Plus into a single-gang standard wall box with a Decora wall plate. A three-conductor cable between the Pixie Plus & the controlled device carries power & control to a supplied terminal block that allows IR control. ...

Pixie Plus (PXE-DCM+) The Pixie Plus Device Control Module provides a simple, standardized control interface for projectors, monitors, display devices, or other AV devices in a compact single-gang form factor. A customizable interface allows for a variety of configurations from two to eight total buttons. The unique design gives you the ability to tailor the control interface to the exact requirements of the devices being controlled. This design not only provides a professional looking control system, but means that you can eliminate any buttons that may confuse the end user. Seven button insert modules are included with each Pixie Plus. You choose the three modules that match your remote control design. IR programming without PC. With standalone IR learning, the Pixie Plus can learn the IR remote control codes of your devices in minutes. No programming is necessary, so leave the laptop at home. Duplicate rooms are a snap. Simply teach one Pixie Plus the codes from the remote control, & any other Pixie Plus will wirelessly clone its configuration in seconds. Protect your investment. Display devices are expensive. If users inadvertently leave the display on, you will unnecessarily have costly lamp replacements. The Pixie Plus offers three options for automatic shutdown of the device. If the display has discrete power commands (ON/OFF) the Pixie Plus can be configured to turn the display off after a certain period of inactivity (based on time since the last key was pressed). If you use the optional real-time clock module the Pixie Plus can be configured to turn off the device at an exact time of day, or a hybrid approach can be used that enables the automatic shutdown timer at a specific time of day giving you the best of both approaches. The real time clock module is accurate to within five minutes per year, will keep time through power outages, & supports daylight saving time. Protect your system from unauthorized use. At your option, the Pixie Plus can be configured to only allow user control after a security code has been entered. This security code is a sequence of button presses that you can configure to be any combination of keys. Easy to install. Use the optional Basic Installation Kit (PXE-BIK50) to install the Pixie Plus into a single-gang standard wall box with a Decora wall plate. A three-conductor cable between the Pixie Plus & the controlled device carries power & control to a supplied terminal block that allows IR control. ...

The Pixie Plus is ideal for creating a single-gang control system for AV display devices including projectors & monitors. The interface can be customised to allow different configurations of between two to eight buttons. The buttons can be housed in three modules chosen from the seven inserts that are provided with the unit. This gives a completely customised interface developed to meet the exact requirements of the user. Powerful Functionality The Pixie Plus is very user friendly & features IR learning technology. This allows the control module to be configured without using a PC as it is able to pick up IR codes from virtually any remote control. The Pixie Plus has a number of innovative features. These include automatic power down of the display after a specified period of inactivity or at a certain time of day. The control module can also be protected from use by unauthorised users by setting a security code that must be entered to activate the Pixie Plus. Features Single-gang Decora form factor IR learning from any remote Wireless cloning Modular design for power, source, volume control Customisable interface Backlit by white LED’s Single buttons can be programmed with multiple codes Security code feature Inactivity shutdown Simple installation Manufacturers number PXE-DCM+ Eurow Technical Specifications Package Type: Single-Gang Decora™ Mounting Dimensions: 4.13" (h)x 1.745" (w)x 0.90" (d) Weight (PCB with bezel & 3 insert modules): 2.5 oz Power Supply: 6VDC, 300m A Output Type: IR Emitter & unidirectional RS232 Outboard Current-Limiting Resistor (IR Emitter): 150 ohm Recommended Wire: 18- to 22-Gauge 3-conductor wire ...

PIXMA MP180 Photo All-in-One An affordable Photo All-in-One to print, copy or scan in colour. Print photos without switching on your PC, direct from Pict Bridge cameras or via memory cards using the easy-to-use Photo Index Sheets. Features * Photo lab quality: Max. 4800*x 1200dpi * Print a 10x 15cm borderless photo in approx. 52 seconds * Direct photo printing from Pict Bridge cameras * Photo Index Sheet for printing from memory cards * 1200x 2400dpi scanner * Chroma Life 100 for long-lasting photos ...

The PL50 Platform Visualiser has a 5 megapixel camera with 240x zoom. A large, embedded lightbox allows users to also view slides, transparencies or x-rays. Also, at the touch of a button, users can save, record & annotate an image, a discussion or student presentation. The visualiser has a 30fps frame rate to show live images & recorded videos to playback in blur-free quality. The new models offers the following:- enhanced Auto Focus 5.0 MP camera with HD1080P resolution 240 x zoom (16 x optical, 15 x digital) Embedded lightbox; 329mm x 265mm One-touch record to USB (Universal Serial Bus) stick or SD card Onboard annotation Shooting area of 400x 300mm 3 year Warranty ...