The Bold FLEX Skin from U-bop is produced from a soft & bendy silicone rubber. This is moulded to have a soft to the touch outer layered finish which is easy to grip & handle. The case is produced in one silicone housing which slides over & sits firmly on the edges of corners of the full outer body of the device to offer the maximum protection possible. Whats included? Fully Flexible Body Skin Case. Designed within the UK. Cut to provide an exacting size, shape & fit onto your device. Absolute clarity to allow your device to be used without being reminded that the device is infact covered. We design & sell the case in several colours & finishes. Also included! Stamp WIPE non-abrasive screen wiper. Clean your screen with this sleek, ultra-handy wiper! Stamp WIPE is a handy, reusable screen wiper which easily cleans off grime & oils from your device screen. Just like a stamp the rear of the Stamp WIPE is finished with a sticky surface. The Stamp WIPE will remain attached to the front, rear of almost any device without leaving any sticky residue. ...

The Bold FLEX Skin from U-bop is produced from a soft & bendy silicone rubber. This is moulded to have a soft to the touch outer layered finish which is easy to grip & handle. The case is produced in one silicone housing which slides over & sits firmly on the edges of corners of the full outer body of the device to offer the maximum protection possible. Whats included? Fully Flexible Body Skin Case. Designed within the UK. Cut to provide an exacting size, shape & fit onto your device. Absolute clarity to allow your device to be used without being reminded that the device is infact covered. We design & sell the case in several colours & finishes. Also included! Stamp WIPE non-abrasive screen wiper. Clean your screen with this sleek, ultra-handy wiper! Stamp WIPE is a handy, reusable screen wiper which easily cleans off grime & oils from your device screen. Just like a stamp the rear of the Stamp WIPE is finished with a sticky surface. The Stamp WIPE will remain attached to the front, rear of almost any device without leaving any sticky residue. ...

The Bold FLEX Skin from U-bop is produced from a soft & bendy silicone rubber. This is moulded to have a soft to the touch outer layered finish which is easy to grip & handle. The case is produced in one silicone housing which slides over & sits firmly on the edges of corners of the full outer body of the device to offer the maximum protection possible. Whats included? Fully Flexible Body Skin Case. Designed within the UK. Cut to provide an exacting size, shape & fit onto your device. Absolute clarity to allow your device to be used without being reminded that the device is infact covered. We design & sell the case in several colours & finishes. Also included! Stamp WIPE non-abrasive screen wiper. Clean your screen with this sleek, ultra-handy wiper! Stamp WIPE is a handy, reusable screen wiper which easily cleans off grime & oils from your device screen. Just like a stamp the rear of the Stamp WIPE is finished with a sticky surface. The Stamp WIPE will remain attached to the front, rear of almost any device without leaving any sticky residue. ...

Keep your Nintendo 3D S looking like new with this Clean & Protect Kit. A Tri. Fold Game Case & 2 single Game Cases hold & protect a total of 6 Nintendo 3D S Game Cards while the 2 included Screen Protectors keep fingerprints away. Also included are a Cleaning Cloth & 3 Retractable Styluses. ...

Mario Kart Wii is an action-packed racing game in which players choose from their favourite Nintendo characters & compete in races or battles whilst driving karts or motorbikes. Get-in, sit-down, & buckle-up to experience frantic kart racing with the game that started it all. Select one of eight characters from the Mario series—offering a variety of driving styles—and take on three championship cups in three different kart classes. Win enough & you’ll unlock a fourth circuit: the ultra-tough Special Cup. Crossing the finish line in first place isn’t an easy task though, as each track has unique obstacles to conquer & racers can obtain special power-ups that boost them to victory. For a different kind of challenge, take on a friend in multiplayer races or go head-to-head in the Battle Mode arena of your choosing, where the object is to pop your opponent’s balloons before you lose your own. With more than 15 tracks to master & nearly endless replay value, Super Mario Kart is classic gaming…with some banana peels thrown in for good measure! ...

1/24 scale replica plastic model of the NISMO GT-R R34 Z-tune Overall length: 190mm,

Width: 76mm Aggressive

...

1/24 scale total

Height: 180mm, total

Width: 81.5mm. Futuristic form & sporty interior



...

1/24 scale plastic assembly kit. Overall length: 190mm Overall

Width: 79mm Overall

Height:



...

The Nissin Di 622 MK2 Speedlite Flashgun has been developed from the very successful & widely acclaimed original Nissin Di 622. The Mk 2 incorporates the 622 original features together with Nissin&8217;s latest technology advances.

Features: Guide No. 62 (metres) at ISO200 with the reflector at 105 degrees. 6 level manual power control. The flash beam covers the frame from 14 mm. (with a wide angle diffuser built-in) to 70 mm. of a digital lens (24-1905 full frame equivalent). Built in reflection panel for fill-in shots. Power source 4 x AA batteries or equivalent. Recycle time
- 5 seconds to full power with fresh batteries. Flash exposure control E-TTL & ETTL for Canon Cameras I-TTL for Nikon. Bounce Flash. Bounce light. The Nissin Swivel head moves 90 degrees upward & 270 degrees horizontally for bounce lighting. Wireless Remote Flash. With the Di 622 Mark 2 you can enjoy creative flash photography with multiple lighting situations from various directions. There are 3 slave modes provided, SD, SF & Wireless TTL. Slave Digital (SD): Di 622 Mark 2 synchronizes to the pre-flash system. The master flash is to be set at TTL (E-TTL for Canon & i-TTL for Nikon) mode. Slave Film (SF): Di 622 Mark 2 synchronizes to the traditional single flash system. The master flash is to be set at manual mode. Studio lighting systems synchronize to this mode. Wireless TTL: Di 622 Mark 2 synchronizes to the wireless remote flash system. The master flash is to be set at Channel 1 group A in wireless remote mode. TTL Flash Level Compensation: The power level can be adjusted from -1.5EV through to +1.5EV by. 05EV steps. Nissin Original ´ My TTL&8217; SETTING. The TTL flash power level is pre-set for exposure at factory. You can, however, user reset the desired exposure level, in +/-0.75 Ev. By 0.25 Ev increments. The pre-set value is memorised as your personal setting after switching the unit off/on. Energy Saving System. The Di 622 Mark 2 has a dual energy saving system. It automatically enters sleep mode when it&8217;s not in use for 5 min & is reset with a touch of the shutter button or any button of the flash. If the unit is not in use for 30 mins, it will automatically power off. With the flash unit set for slave mode, sleep mode is cancelled & the unit will not automatically turn off until 60 mins have elapsed. AF Assist Beam. In darkness or dim light conditions, the Di 622 Mark 2 beams a red light to create a sharp contrast to enable the camera&8217;s focus sensor to focus easily on the subject. Flash Power Lock System. The Di 622 Mark 2 is compatible with either the FE lock (Canon) or FV lock (Nikon) system. Refer to the camera owner&8217;s manual for details. X-Contact & External Synchro Contact. Di 622 Mark 2 can be used without hotshoe cameras by using the synchronization X-terminal or 3.5 mm. sockets instead. Firmware Updates. A firmware upgrade system is available for the Di 622, which provides a service to upload the latest software Accessories Included: Show st&, pouch. Dimensions: 130x 77x 103 mm. / 5.1x 3x 4.1 inches. Weight: 315 g. (without battery.


...

Allows the Nissin MF-18 macro ring flash to be attached to 49 mm. threaded lenses.

Features:





...