The DWL-3600AP is an indoor 802.11n Wi-Fi Access Point designed specifically for deployment in business environments. Highly manageable & capable of high data transmission speeds, the DWL-3600AP integrates seamlessly into existing network infrastructure & can be easily scaled up to meet future demands. Centrally manageable via D-Link’s DWC-1000 Wireless Controller Standalone mode for small deployments High-power radio design to cover wider areas 802.11n connectivity for increased network capacity Up to 300 Mbps wireless speeds 1 Gigabit Ethernet port with Po E for convenient installation AP Clustering function for deployments that don’t require a centralised controller Integrated RFID recognition for Aeroscout™ devices to track wireless clients Air Magnet™ support for WLAN planning, surveying & troubleshooting VLAN support WMM™ (Wireless Multi Media) to prioritise audio, video & voice applications Enhanced security with RADIUS support Load Balancing function to optimise high network traffic volume & redundancy ...

Wireless Connectivity Wireless 802.11n gives increased speed, range, & reliability Place anywhere without the need for additional network cabling Video Real-time H.264 & MJPEG compression for reduced video file size Motion detection Video Monitoring Send snapshots or video clips through e-mail Send snapshots to an FTP site Remote video monitoring using mydlink™ Ease of Use Zero Configuration Setup using a D-Link cloud router Supports WPS for simple, secure wireless setup mydlink™-enabled allows hassle-free remote access Camera Camera Hardware Profile 1/5” VGA progressive CMOS sensor 8 meter IR illumination distance Minimum illumination: 0 lux with IR LEDs on Built-in Infrared-Cut Removable (ICR) Filter module 4X digital zoom Lens: fixed length 2.2 mm Aperture: F2.0 Angle of view: (H) 66.22° (V) 49.08° (D) 77.04° Exposure time: 1/15 to 1/15, 000 sec. Built-in microphone Image Features Configurable image size, quality, frame rate, & bit rate Time stamp & text overlays Configurable motion detection windows Adjustable brightness, saturation, contrast Video Compression Simultaneous H.264/MJPEG format compression JPEG for still images Video Resolution 640 x 480, 320 x 240, 160 x 112 at frame rates up to 30 fps 1 Audio Compression PCM Connectivity 10/100 BASE-TX Ethernet port 802.11n wireless Pan/ Tilt Pan Range -170° to +170° (total 340°) Tilt Range -25° to +95° (total 120°) Angular Velocity 16° per second Step Setting Pan 1°/2°/3°/4°/5° (default)/10°/15°/20°/25°/30° per click Tilt: 1°/2°/3°/4°/5° (default)/10°/15°/20°/25°/30° per click Network Network Protocols IPV4, ARP, TCP, UDP, ICMP DHCP Client NTP Client (D-Link) DNS Client DDNS Client (D-Link) SMTP Client FTP Client HTTP Server PPPo E UPn P Port Forwarding LLTD Security Password authentication HTTP digest encryption Advanced Features System Requirements for Web Interfaces Operating system: Microsoft Windows, XP/ Vista/7/8 Browser: Internet Explorer 7/ Firefox 12/ Safari 4/ Chrome 20 or higher with Java enabled Event Management Event notification & uploading of snapshots/video clips via e-mail (SMTP) Uploading of snapshots to FTP Motion Detection Remote Access Remote Management Configuration accessible via web browser Mobile support mydlink™ Lite app for i OS, Android & Windows Phone mydlink™+ app for i OS & Android General Weight Device: 292.4 grams (0.64 lbs) Stand: 60.8 grams (0.13 lbs) Power 12 V DC 1 A, 50/60 Hz Power Consumption 8.64 watts Temperature Operating: 0 to 40 °C (32 to 104 °F) Storage: -25 to 70&730; C (-13 to 158 &730;F) Humidity Operating: 20% to 85% non-condensing Storage: 5% to 95% non-condensing Certifications CE CE LVD FCC C-Tick

Dimensions 102.35 x 101.27 x 133.6 mm (4.03 x 3.99 x 5.26 inches) (Camera only) 102.35 x 101.27 x 230.0 mm (4.03 x 3.99 x 9.06 inches) (Including mounting bracket)

...

The D-Link Wireless N Dualband USB (Universal Serial Bus) Mini Adapter is an 802.11n (draft 2.0) client device designed for users looking to get a reliable wireless connection that can also handle High-Definition (HD) video streaming throughout the house. This is best achieved by using the DWA-160 together with a draft 802.11n quadband router such as the D-Link DIR-855. The DWA-160 supports Wireless N signals in either the 2.4 or 5 GHz frequency range. This means that you can check e-mail & browse the Internet using the 2.4 G Hz band while reserving the 5 G Hz band for streaming HD movies & other media. The DWA-160 is also backward compatible, which means it can be used in existing 802.11g or 802.11a networks to enable significantly enhanced reception. ...

The DAP-1522 means that you can easily upgrade any router to support streaming of High-Definition (HD) multimedia content in your home over a wireless connection. This device will let you ‘bridge between two different physical media, for example the wired Ethernet connection from the DVR & the wireless media of your wireless network. It transforms your wired device into a wireless one without any hassles of stringing cable wires. The DAP-1522 is certified for the Wi-Fi alliances standard for wireless security at the touch of a button, Wi-Fi Protected Setup (WPS). With it, the wireless network name (SSID) & encryption keys are automatically generated & broadcast to the client devices. There is no need to memorize complicated passwords & key them in several times. This considerably simplifies the process of setting up security on the wireless network. ...

D-Link's Wireless N Open Source Access Point means that you can create your own personal wireless home network to share wireless Internet connection, documents, music, & photos. Using Wireless N technology, it offers a higher speed, extended coverage & virtually no dead spots while still compatible with previous network standards. This Access Point can be configured to operate in any of the following 7 modes: 1. Wireless Access Point (AP); 2. AP Client to connect to another Access Point; 3. Bridge, with one or more peer APs, to easily create dedicated building-to-building links; 4. Bridge with AP, to allow wireless clients on the bridging link; 5. Wireless repeater, to extend the wireless coverage & cover any "dead spot"; 6. WISP Client Router, to share an Internet connection based on Wi-Fi between wired computers without an additional router; 7. WISP Repeater, to share an Internet connection based on Wi-Fi between wired/wireless computers without an additional router. Robust security is included, with support for WPA/WPA2 encryption, MAC address filtering & the SSID broadcast disable function, which makes your network invisible for outsiders. A schedule function means that you can turn the wireless network off when not needed, saving energy. D-Link Click'n Connect (DCC), is an intuitive software wizard that runs directly from the product CD-ROM, helping you to install & configure the device without prior knowledge required. Advanced users will enjoy adding their own features, as the DAP-1360 is based on an open-source Linux platform. ...

SUPERIOR WIRELESS COVERAGE D-Link DWA-131 Wireless N Nano USB (Universal Serial Bus) Adapter provides superior wireless signal for your computer compared to the existing wireless 802.11g technology. This Wireless N adapter is ideal for day-to-day activities such as transferring files, browsing the Internet, & downloading music. D-Link Wireless N products use smart Antenna technology to transmit multiple streams of data allowing you to receive wireless signals from the farthest corners of your home. Furthermore, D-Link Wireless N technology extends your wireless range, while maintaining compatibility with all your existing 802.11b/g wireless routers & access points. EASY TO SET UP The Quick Setup Wizard provides an easy way to setup your USB (Universal Serial Bus) adapter & the Wireless Manager included with this product helps keep track of all your most frequently accessed networks. COMPACT & CONVENIENT The DWA-131 easily connects your desktop or notebook PC to a wireless network for Internet access & fi le sharing. Wi-Fi Protected Setup (WPS) feature enables devices to establish an easy, one-time, single-click connection with an access point or wireless router, eliminating complex encryption codes. WPS also offers advanced security features that are simple & easy to configure. With its unique ‘ Firefl y’ design & unmatched performance, this ultra-portable USB (Universal Serial Bus) adapter is an ideal choice for setting up a secure wireless connection. ...

The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscribers sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. ...

The DGS-3120 x Stack Series are enhanced L2 access stackable switches designed to connect end-users in a secure SMB or enterprise network. These switches support physical stacking, multicast & enhanced security, making them an ideal Gigabit access layer solution. They are equipped with an SD Card slot, allowing the user to boot images & upload configuration files directly from an SD Card. The DGS-3120 Series is embedded with two different software images
- Standard Image (SI) & Enhanced Image (EI). The Standard Image provides sophisticated features for small & medium businesses, including advanced Quality of Service (Qo S), traffic shaping, L2 multicasting, & robust security features. The Enhanced Image supports ERPS, Double VLAN (Q-in-Q), Ethernet OAM, Static Route, IMPB, s Flow, IPv 6 features which are suitable for the next generation IPv 6 networks or triple play applications in Metro Ethernet. The DGS-3120 Series targets small & medium businesses that require a high level of network security & maximum uptime. All the models in DGS-3120 Series support an external redundant power supply so that continued operation can be assured. They also include other features, such as Spanning Tree, Rapid Spanning Tree & Multiple Spanning Tree, Loopback Detection, & Broadcast Storm Control, which enhance network resilience. The Ethernet Ring Protection Switching (ERPS) function minimizes the recovery time in case of a loop failure. For load sharing & redundancy backup in switch cascading/server attachment configuration, the DGS-3120 Series provides dynamic port trunking. The DGS-3120 Series provides users with the latest security features such as Multi-layer & Packet Content Access Control Lists (ACL), Storm Control, & IP-MAC-Port Binding (IMPB) with DHCP Snooping. The IP-MAC-Port Binding feature allows administrators to bind a source IP address with an associated MAC & also define the port number to enhance user access control. With the DHCP Snooping feature, the switch automatically learns IP/MAC pairs by snooping DHCP packets & saving them to the IMPB white list. In addition, the D-Link Safeguard Engine identifies & prioritizes "CPU interested" packets to prevent malicious traffic from interrupting normal network flows, & to protect switch operation. The DGS-3120 Series supports authentication mechanisms & security policies that can be applied individually to each connected host. In addition, the switch also supports Microsoft NAP (Network Access Protection). NAP is a policy enforcement technology that allows administrators to protect network assets from unhealthy computers by enforcing compliance with network health policies. The DGS-3120 Series implements a rich set of multilayer Qo S/ Co S features to ensure that critical network services like Vo IP, video conference, IPTV & IP surveillance are served with high priority. The Traffic Shaping features guarantee bandwidth of these services when the network is busy. With L2 Multicast support, the DGS-3120 shows its ability to handle growing IPTV applications. To uphold users' Service Level Agreements (SLA), service providers must reduce the Mean Time to Repair (MTTR) & increase service availability. Ethernet OAM features address these challenges & enable service providers to offer carrier-grade services. The DGS-3120 Series supports industry-standard OAM tools, including IEEE 802.3ah, IEEE802.1ag, & ITU-T Y.1731. Connectivity Fault Management (CFM) provides tools to monitor & troubleshoot end-to-end Ethernet networks, allowing service providers to check connectivity, isolate network issues, & identify customers affected by network issues. The DGS-3120 Series is fully compliant with the future IPv 6 networks. It supports IPv 6-based security functions to protect the network from illegal IPv 6 clients. The DGS-3120 Series has been certified with IPv 6 Ready Logo Phase 2 from the IPv 6 forum, a worldwide IPv 6 advocacy consortium.
...

The DGS-3120 x Stack Series are enhanced L2 access stackable switches designed to connect end-users in a secure SMB or enterprise network. These switches support physical stacking, multicast & enhanced security, making them an ideal Gigabit access layer solution. They are equipped with an SD Card slot, allowing the user to boot images & upload configuration files directly from an SD Card. The DGS-3120 Series is embedded with two different software images
- Standard Image (SI) & Enhanced Image (EI). The Standard Image provides sophisticated features for small & medium businesses, including advanced Quality of Service (Qo S), traffic shaping, L2 multicasting, & robust security features. The Enhanced Image supports ERPS, Double VLAN (Q-in-Q), Ethernet OAM, Static Route, IMPB, s Flow, IPv 6 features which are suitable for the next generation IPv 6 networks or triple play applications in Metro Ethernet. The DGS-3120 Series targets small & medium businesses that require a high level of network security & maximum uptime. All the models in DGS-3120 Series support an external redundant power supply so that continued operation can be assured. They also include other features, such as Spanning Tree, Rapid Spanning Tree & Multiple Spanning Tree, Loopback Detection, & Broadcast Storm Control, which enhance network resilience. The Ethernet Ring Protection Switching (ERPS) function minimizes the recovery time in case of a loop failure. For load sharing & redundancy backup in switch cascading/server attachment configuration, the DGS-3120 Series provides dynamic port trunking. The DGS-3120 Series provides users with the latest security features such as Multi-layer & Packet Content Access Control Lists (ACL), Storm Control, & IP-MAC-Port Binding (IMPB) with DHCP Snooping. The IP-MAC-Port Binding feature allows administrators to bind a source IP address with an associated MAC & also define the port number to enhance user access control. With the DHCP Snooping feature, the switch automatically learns IP/MAC pairs by snooping DHCP packets & saving them to the IMPB white list. In addition, the D-Link Safeguard Engine identifies & prioritizes "CPU interested" packets to prevent malicious traffic from interrupting normal network flows, & to protect switch operation. The DGS-3120 Series supports authentication mechanisms & security policies that can be applied individually to each connected host. In addition, the switch also supports Microsoft NAP (Network Access Protection). NAP is a policy enforcement technology that allows administrators to protect network assets from unhealthy computers by enforcing compliance with network health policies. The DGS-3120 Series implements a rich set of multilayer Qo S/ Co S features to ensure that critical network services like Vo IP, video conference, IPTV & IP surveillance are served with high priority. The Traffic Shaping features guarantee bandwidth of these services when the network is busy. With L2 Multicast support, the DGS-3120 shows its ability to handle growing IPTV applications. To uphold users' Service Level Agreements (SLA), service providers must reduce the Mean Time to Repair (MTTR) & increase service availability. Ethernet OAM features address these challenges & enable service providers to offer carrier-grade services. The DGS-3120 Series supports industry-standard OAM tools, including IEEE 802.3ah, IEEE802.1ag, & ITU-T Y.1731. Connectivity Fault Management (CFM) provides tools to monitor & troubleshoot end-to-end Ethernet networks, allowing service providers to check connectivity, isolate network issues, & identify customers affected by network issues. The DGS-3120 Series is fully compliant with the future IPv 6 networks. It supports IPv 6-based security functions to protect the network from illegal IPv 6 clients. The DGS-3120 Series has been certified with IPv 6 Ready Logo Phase 2 from the IPv 6 forum, a worldwide IPv 6 advocacy consortium. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.
...

D-Links DSN-6000 Series i SCSI SAN array is a fully redundant, data center-class network storage solution in a 2U rackmount form factor. The DSN-6000 Series currently supports 36TB of raw capacity using 3TB drives (and even greater capacity as larger disk drives become available), & overall scalability to 180TB using DSN-6020 Expansion Enclosure. D-Links DSN-6000 Series provides 1GE or 10GE host interface connectivity which can handle over 200, 000 I/O per second. The DSN-6000 Series integrates x Stack storage architecture & supports services for applications demanding high throughput, scalability & flexible storage planning. The DSN-6000 Series can be easily implemented as primary storage, as secondary storage to supplement an existing infrastructure, or as a nearline storage device to improve backup & recovery times. Using the intuitive & integrated management GUI, the DSN-6000 Series Arrays can be seamlessly incorporated in both Physical & Virtual Server environments. The DSN-6000 Series can provide the failover & redundancy capabilities required for mission critical scenarios such as Virtual Machine (VM) shares, database hosting, Online Transactional Processing (OLTP), email applications, storage consolidation & other primary storage needs. It is equipped with fully redundant components for all major functions, such as RAID controllers, power supplies, fan modules, battery backup modules, & SAS JBOD expansion ports. The Hot-pluggable design is capable of providing uninterrupted services. In addition, the DSN-6000 Series incorporates advanced high availability features such as RAID 6 & RAID 60 support, writable snapshot, Microsoft Windows VSS support, & volume configuration restoration. These advanced features help to reduce or eliminate any system downtime. Unlike other vendors, D-Links DSN-6000 Series is able to upgrade to firmware without the system going offline. Both firmware image & volume handling are well protected by the redundant RAID controllers; when one RAID controller is down or has lost connection, the other RAID controller takes over its tasks immediately. This feature ensures that volumes & services are transferred seamlessly & simultaneously. The optimized Input/ Output Operations per second & unparalleled throughput are capable of providing run-time critical online services, such as Cloud storage, SQL, Exchange, & high-end surveillance storage. Furthermore, with its i SCSI interface, D-Links DSN-6000 Series is ideal for virtualization environments
- VMWare, Hyper-V, & Citrix. System administrators can install up to 32 Operating Systems onto the i SCSI system through the Boot-from-SAN functionality. With this feature, the multiple Operating Systems/ Servers can be easily managed & protected by D-Link advanced data protection features, avoiding system downtime caused by single points of failure. The capacity of the DSN-6000 Series storage arrays can be easily expanded with the addition of the DSN-6020 Expansion Enclosure, which supports up to 12 SAS & SATA hard drives. Up to 4 DSN-6020 enclosures can be mounted in a storage array to expand the overall capacity to 180TB, & even higher capacity as larger hard drives are introduced.
...