D-Link’s Power Line AV 500 2-Port Mini Adapter Starter Kit uses standard electrical wiring to extend your home network. Simply plug one adapter into your existing router to turn any power outlet in your home into an Internet connection. With two Ethernet ports you can connect up to two Internet-enabled devices, such as your computer, game consoles, smart TVs. This Starter Kit is ideal if you are setting up Power Line for the first time in your home. ...

D-Link’s Power Line AV 500 2-Port Mini Adapter Starter Kit uses standard electrical wiring to extend your home network. Simply plug one adapter into your existing router to turn any power outlet in your home into an Internet connection. With two Ethernet ports you can connect up to two Internet-enabled devices, such as your computer, game consoles, smart TVs. This Starter Kit is ideal if you are setting up Power Line for the first time in your home. ...

The D-Link DHP-P500AV Power Line AV 500 Passthrough Adapter turns every power socket into a possible wired network connection, by extending your existing network using the electrical wiring in your home. This adapter uses the latest Power Line technology to transmit data at speeds of up to 500 Mbps, allowing you to stream media content, game & browse the web simultaneously, & flawlessly. Convenient & secure setup The DHP-P500AV plugs directly into a power outlet, so you can extend your home network by plugging one adapter into your router, & another adapter into the room you want to extend your connection to. For convenient setup, an encryption key can be quickly configured at the push of a button on the device, to protect the network from any intruders. With hassle-free plug & play installation, the DHP-P500AV is an ideal solution for creating a wall-to-wall home network. Ideal for bandwidth-intensive applications This adapter is capable of delivering wired data transfer rates of up to 500 Mbps. Advanced technology built into this device makes it more resistant to electrical interference from other household appliances, so users can fully benefit from the maximum transmission speeds. This makes it absolutely ideal for bandwidth-intensive applications, guaranteeing smooth HD video streaming, Vo IP calls, & lag-free gaming even if everyone is online at the same time. In addition, its Quality of Service (Qo S) Engine prioritises Internet traffic, ensuring that multimedia applications do not experience glitches while web surfing & downloads are in progress. Compatibility Based on the industry-leading Power Line Alliance technology, the DHP-P500AV is compatible with other brands’ devices based on the IEEE 1901 standard. It is also compatible with devices implementing the former Power Line AV standard, such as D-Link’s DHP-306AV/-307AV, DHP P306AV/ -P307AV, & DHP-W306AV/-W307AV. D-Link Green The DHP-P500AV is part of D-Link Green, D-Link’s program for providing eco-friendly alternatives without compromising performance: if data transmission does not occur over a certain period of time, the adapter will automatically go into sleep mode to save power. ...

The DHP-W310AV Power Line AV 500 Wireless N Extender means that you can extend your existing home network to enjoy high-speed & reliable connectivity throughout your home. The Power Line AV 500 Wireless N Mini Extender features both wireless & Power Line. This means that you can benefit from Power Line networking, compliant with the Home Plug AV standard that uses your existing home electrical wiring to extend your home network. The wireless ability means that you can increase the area in your home where you can use your wireless devices. The D-Link DHP-W310AV Power Line AV 500 Wireless N Extender, compliant with the Home Plug AV standard, uses your home’s existing electrical wiring to create a network or extend your existing network. It turns every power outlet into a potential network connection to access digital media devices, game consoles, print servers, computers, & network storage devices throughout your home. in addition, Wireless N provides high speed transfers without the need for unsightly network cables. Converts any power socket into a network connection point Up to 500 Mbps speeds over your existing electrical wiring Up to 300 Mbps wireless speeds enhanced resistance to electrical interference D-Link Green: energy-saving design ...

The D-Link PS2/USB 8-port combo KVM switch DKVM-440 is a high-end local remote management solution which means that you can control PCs from a single console. Please note: networking components such as switches, routers, KVM & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The D-Link DWS-4026 is a unified switch that provides centralized management of a wireless network infrastructure in business environments. Every port features Power over Ethernet (Po E) & Gigabit connectivity that support the high-speed wireless standard, 802.11n. All aspects of the wireless LAN may be centrally controlled, including SSIDs, VLAN & encryption keys. In addition, the switch can adjust the output power on each AP & perform dynamic channel allocation & load balancing between APs. Fast roaming is supported, not only between physical Access Points, but also between logical IP subnets. The switch also

Includes:: full Layer 2+ management features for use in mixed wired/wireless environments. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

The DWL-G630 Wireless G Card Bus network adapter connects your notebook to a Wi-Fi network. It provides speeds of up to 54 Mbps when used with other 802.11g equipment. The DWL-G630 network card is backward compatible with 802.11b standard wireless devices, providing seamless interoperability with the earlier standard equipment. The DWL-G630 network card features WPA (Wi-Fi Protected Access) & 802.1x for wireless user authentication, providing you a much higher level of security for your data & communications. It also

Includes:: a configuration utility to let your computer discover available wireless networks & create & save detailed connectivity profiles for the networks most often accessed. With PCI plug-&-play capabilities, this network card can be easily installed into your PC for direct connection to any wireless device in the ad-hoc mode or through an access point or router in the infra-structure mode. When used with other D-Link Air Plus G products, the network card automatically connects to the network.

...

Managed Wireless Switch Access Point with Po E The D-Link Air Premier DWL-8500AP is a thin 802.11a/g wireless Access Point designed for use in conjunction with DWS-3024 Wireless Switch in business-class enterprise environments. Designed for indoor installation, this access point provides secure options for network administrators to deploy a highly manageable & extremely robust wireless network. This access point supports Power over Ethernet (Po E) & provides two high-gain antennae for optimal wireless coverage. Centralised Wireless Intelligence The Access Point is entirely controlled from the wireless switch, ie configuration data is not kept at AP level, adding a layer of protection in case of theft or vandalism. Connection to the switch can be direct or indirect. Profiles including SSID, IP address, VLAN, security are only configured once & then applied to the managed APs. If an AP needs swapping, the replacement AP automatically inherits the same configuration, making the process seamless. Po E support for Easy Deployment For installations in areas where power outlets are not readily available, the access point integrates 802.3af Power over Ethernet (Po E). The wireless switch will provide power as far as 100m away via standard Ethernet cabling. Up to 108 Mbps Wireless Speed The DWL-8500AP delivers extremely reliable wireless performance with wireless throughput rates of up to 54 Mbps in either frequency b&. It has the added capability of reaching maximum wireless signal rates of up to 108 Mbps (Turbo mode) powered by D-Link 108G technology*. *802.11g only. Maximum wireless signal rate based on IEEE standard 802.11g specifications. Actual data throughput will vary. Network conditions & environmental factors may lower actual data throughput rate. Advanced Wireless Security & Quality of Service (Qo S) The DWL-8500AP supports 64/128/152-bit WEP data encryption, WPA/WPA2 security & multiple SSIDs. MAC address filtering, SSID Broadcast Disable can be configured from the switch to set up security & limit outsiders’ access to the internal network. The DWL-8500AP supports 802.1Q VLAN Tagging & WMM (Wi-Fi Multimedia) for important wireless transmissions such as Vo IP & streaming media applications, delivering critical user-based services, such as prioritized delivery of voice traffic. Rogue AP detection The DWL-8500AP can be configured to periodically leave its operational channel & scan other channels within both frequency ranges, allowing the wireless switch to monitor the environment & detect rogue APs. If a rogue is detected, the closest DWL-8500AP can launch RF counter measures by spoofing 802.11 control messages. This prevents clients from communicating, associating & authenticating with a rogue AP. ...

The D-Link Air Premier DWL-3200AP is a powerful & reliable wireless access point for business-class enterprise environments. Designed for indoor installation, this access point provides secure options for network administrators to deploy a highly manageable & extremely robust wireless network. Enclosed in a plenum metal chassis, the DWL-3200AP adheres to strict fire codes & ensures complete safety. This access point supports 802.3af Power over Ethernet (Po E) & provides two high-gain antennas for optimal wireless coverage. The DWL-3200AP delivers extremely reliable wireless performance with standard 802.11g wireless throughput rates of up to 54 Mbps. It has the added capability of reaching maximum wireless signal rates of up to 108 Mbps (Turbo mode) powered by D-Link 108G technology. At the same time, the DWL- 3200AP remains fully compatible with the IEEE 802.11b & 802.11g standards. Since wireless security remains a strong concern among businesses, the DWL-3200AP provides the latest wireless security technologies by supporting both WPA Enterprise & 802.1x to ensure complete network protection. In addition, the DWL-3200AP currently comes 802.11i-ready to fully support industrial grade wireless security. Network administrators can manage all the DWL-3200 A Ps settings via its web-based configuration utility or with Telnet. For advanced network management, the administrators can use D-Links AP Manager or D-View SNMP management module to configure & manage multiple access points from a single location. In addition to a streamlined management process, network administrators can also verify & conduct regular maintenance checks without wasting resources by sending personnel out to physically verify proper operation. To maximize total return on investment, the DWL-3200AP can be configured to operate as an access point (AP mode), a point-to-point bridge or a point-to-multipoint bridge (WDS mode). In the WDS mode, the DWL-3200AP communicates only with wireless bridges, without allowing for wireless clients or stations to access them. The DWL-3200AP supports multiple SSIDs, allowing you to separate applications based on security & performance requirements. You can enable encryption & authentication on one SSID to protect private applications & no security on another SSID to maximize open connectivity for public usage. Multiple SSIDs means you can mix & match the broadcasting of SSIDs. For public Internet access applications, you can broadcast the SSID to enable user radio cards to automatically find available access points. For private applications, you can disable SSID broadcast to prevent intruders from identifying your network. You can set the number of users that can associate via a particular SSID to control usage of particular applications. This can help provide a somewhat limited form of bandwidth control for particular applications. By supporting multiple SSIDs, the DWL-3200AP means that you can logically divide your access point into several virtual access points all within a single hardware platform. Rather than having two separate WLANs, you can deploy one access point to support more than one application, such as public Internet access & internal network control to increase flexibility & keep costs down. ...

The D-Link Air Premier DWL-3260AP is a powerful & reliable wireless Access Point for business-class enterprise environments. Designed for indoor installation & supporting Power over Ethernet (Po E), this Access Point provides secure options for network administrators to deploy a highly manageable & extremely robust wireless network. The DWL-3260AP is round in shape & can be camouflaged as a smoke detector so as not to attract attention. Its diagnostic LED can be turned off to further reinforce the impression of being a smoke detector. For installations in areas where power outlets are not readily available, the Access Point (AP) integrates 802.3af Power over Ethernet (Po E), to ensure flexibility & easy set-up. From a ceiling, the DWL-3260AP can obtain power from a Po E switch located as far away as 100 meters through unused pairs of the existing network cable. The DWL-3260AP delivers extremely reliable wireless performance with standard 802.11g wireless throughput rates of up to 54 Mbps. It has the added capability of reaching maximum wireless signal rates of up to 108 Mbps (Turbo mode) powered by D-Link 108G technology. At the same time, the DWL-3260AP remains fully compatible with IEEE 802.11b & 802.11g standards. The DWL-3260AP provides industrial grade wireless security by supporting both WPA & WPA2-Enterprise as well as 802.1X to ensure complete network protection. Other security features included in this Access Point are MAC Address Filtering, Wireless LAN segmentation, Broadcast SSID disabled, & support for Advanced Encryption Standard (AES) data encryption. To maximize total return on investment, the DWL-3260AP can be configured to operate as an AP (AP mode), a point-to-point bridge or a point-to-multipoint bridge (WDS mode). In the WDS mode, the DWL-3260AP only communicates with other wireless bridges, without allowing wireless clients or stations to access them. In this scenario, the built-in omni-directional antenna may be disabled via a slide switch & the AP fitted with an external high gain directional antenna. The DWL-3260AP supports multiple SSIDs, allowing you to logically divide your AP into several virtual Access Points, all within a single hardware platform. For instance, you can enable encryption & authentication on one SSID to protect private applications & opt to not enable security on another SSID to maximise open connectivity for public usage. With multiple SSIDs, the number of physical APs deployed may be reduced, minimising interference & keeping costs down. In addition, the number of users associated to a particular SSID may be capped, providing a form of bandwidth control for particular applications. Network administrators can manage all the DWL-3260 A Ps settings via its web-based configuration utility or with Telnet. D-Links AP Manager or D-View SNMP management module may also be used to configure & manage multiple APs from a single location. In addition to a streamlined management process, network administrators can also verify & conduct regular maintenance checks without wasting resources by sending personnel out to physically test that the device is functioning correctly. ...