The Cooler Master GX range of power supplies feature a single powerful +12V rail that has been designed to deliver more than ample power to dual graphics card systems, no matter if you use SLI or Cross Fire X. On top of this you also get a wide range of other high-quality Cooler Master features which makes the Cooler Master GX range the ideal solution for your system. Designed for dual GPU systems All of the power supplies in the Cooler Master GX range have been specifically designed for dual GPU systems & the 750W model also carries SLI certification for high-end Nvidia GTX graphics cards, as it offers four PCI Express power connectors. Up to 85% efficiency All of the power supplies in the Cooler Master GX range features up to 85% power efficiency & are 80 plus rated. This means more power goes where it’s needed & less power is wasted in heat. Advanced features The Cooler Master GX series comes with a range of advanced features such as a powerful single +12V rail, huge bulk capacitors with a >17ms hold up time which means that the power supply will be able to handle peak loads better, low noise dual layer EMI filters that reduces noise in the power lines, an energy efficient dual mode Active PFC/PWM controller, an efficient transformer that reduces the 5 Vsb power loss when the system is in standby mode & a wide range of protection designs that will prevent damage to the system in case of a malfunction. Features * Compliance with the latest Intel standard ATX 12V V 2.31 * Single 12V rail for most demanding SLI configurations * High efficiency design that meets 80plus requirements (85% typical) * Ultra-silent operation with intelligent 120mm fan speed control * Multiple protection design * High reliability * Huge bulk capacitor for hold time up >17ms at full loading * Integrated Active PFC with PWM * Efficient transformer * Five year warranty

Specification Model RS.50-ACAAE3-UK Type Intel Form factor ATX 12V V2.31 Dimension (W / H / D) 150*140*86 mm Input Voltage 90-264 Vac Input Current 7A@115vac, 5A@230 Vac 10A@115 Vac, 6A@230 Vac Input Frequency Range 47-63 Hz PFC Active PFC Power Good Signal 100-500ms Hold Up Time >17ms Efficiency 85% Typical MTBF > 100000 Hours Protection OVP/UVP/OPP/OTP/SCP Output Capacity 550W/650W/750W Max. Output Capacity 660W/780W/900W Operation Temperature 0-40 Degrees Regulatory TUV/CE/UL/FCC/BSMI/GOST/C-tick/CCC/KCC Fan 120mm Certifications 80 Plus 750W: SLI & 80 Plus Connector 20+4 Pin MB x 1 4+4 Pin CPU 12V x 1 6+2 Pin PCI x 4 SATA x 9 4 Pin Peripherial x 3 4 Pin Floppy x 1

...

The Cooler Master GX range of power supplies feature a single powerful +12V rail that has been designed to deliver more than ample power to dual graphics card systems, no matter if you use SLI or Cross Fire X. On top of this you also get a wide range of other high-quality Cooler Master features which makes the Cooler Master GX range the ideal solution for your system. Designed for dual GPU systems All of the power supplies in the Cooler Master GX range have been specifically designed for dual GPU systems & the 750W model also carries SLI certification for high-end Nvidia GTX graphics cards, as it offers four PCI Express power connectors. Up to 85% efficiency All of the power supplies in the Cooler Master GX range features up to 85% power efficiency & are 80 plus rated. This means more power goes where it’s needed & less power is wasted in heat. Advanced features The Cooler Master GX series comes with a range of advanced features such as a powerful single +12V rail, huge bulk capacitors with a >17ms hold up time which means that the power supply will be able to handle peak loads better, low noise dual layer EMI filters that reduces noise in the power lines, an energy efficient dual mode Active PFC/PWM controller, an efficient transformer that reduces the 5 Vsb power loss when the system is in standby mode & a wide range of protection designs that will prevent damage to the system in case of a malfunction. Features * Compliance with the latest Intel standard ATX 12V V 2.31 * Single 12V rail for most demanding SLI configurations * High efficiency design that meets 80plus requirements (85% typical) * Ultra-silent operation with intelligent 120mm fan speed control * Multiple protection design * High reliability * Huge bulk capacitor for hold time up >17ms at full loading * Integrated Active PFC with PWM * Efficient transformer * Five year warranty

Specification Model RS.50-ACAAE3-UK Type Intel Form factor ATX 12V V2.31 Dimension (W / H / D) 150*140*86 mm Input Voltage 90-264 Vac Input Current 7A@115vac, 5A@230 Vac 10A@115 Vac, 6A@230 Vac Input Frequency Range 47-63 Hz PFC Active PFC Power Good Signal 100-500ms Hold Up Time >17ms Efficiency 85% Typical MTBF > 100000 Hours Protection OVP/UVP/OPP/OTP/SCP Output Capacity 550W/650W/750W Max. Output Capacity 660W/780W/900W Operation Temperature 0-40 Degrees Regulatory TUV/CE/UL/FCC/BSMI/GOST/C-tick/CCC/KCC Fan 120mm Certifications 80 Plus 750W: SLI & 80 Plus Connector 20+4 Pin MB*1 4+4 Pin CPU 12V*1 6+2 PIn PCI-e*2 SATA*6 4 Pin Peripherial*3 4 Pin floppy*1

...

Cooler Master adds another new member to the HAF series, the HAF 912 Plus. To carry the mission of providing the best thermal solutions, HAF 912 Plus supports two 120 mm for external radiator & high-end CPU coolers. Furthermore, the spacious interior accommodates two 200mm fans & two-- 120mm fans for better & superior airflow yet, enough to fit 12 devices & high-end GPUs such as Radeon HD5970 & Nvidia GTX 480. HAF 912 Plus features rugged looks, massive air cooling & trademark interior that signifies performance & makes it a killer machine. Features
- HAF 912 Plus is built in aggressive design & stylish interior black coating.
- The compact interior able to accommodates 12 devices.
- Supports long graphics cards including ATI Radeon HD 5970 & NVIDIA Geforce GTX 480.
- Superior cooling performance support up to two 200 mm & two 120 mm fans.
- Front 200mm fan with brilliant Red LED provides the best airflow to HDDs.
- Removable 3.5”HDD cage provides enthusiasts more convenient installation.
- Customized neat cable management. Specifications Available Color Black Material Case Body: Steel / Front bezel: Plastic & mesh Dimension (W / H / D) Main unit: 230 x 480 x 496 mm / 9.1 x 18.9 x 19.5 inch (with stand) Weight Net: 8.45kg / 18.6 lbs M/B Type Micro-ATX / ATX 5.25" Drive Bay 4 Exposed (one could be converted to 3.5” bay) 3.5" Drive Bay 1 Exposed (converted from 5.25” bay) / 6 Hidden I/O Panel USB (Universal Serial Bus) 2.0 x 2, e-SATA x 1, Audio x 1, Mic x 1 Expansion Slots 7+1 Cooling System Front: 200 mm red LED fan x 1, 700RPM, 19d BA (can be swapped for two 120mm fans) Top: 200 mm black fan x 1 (not included ; can be swapped for two 120mm fans) Rear: 120 mm black fan x 1, 1200 RPM, 17 d BA Side:120/140 mm fan x 1 (not included) Power Supply Bottom –mounted / ATX PS2 / EPS 12V (PSU not included) 2.5"/3.5"- SATA HDD Drive Bay 4 Hidden (two converted from 3.5” bay)






...

The award winning Coolermaster HAF Series of cases brought about the aesthetics of battle-hardened military vehicles. Its cases each offered the user an unprecedented amount of access to customizing their airflow & rearranging their internal system layout. Together, these features were realized for the first time within the Coolermaster HAF 932 & now they will begin again in the new Coolermaster HAF 932 Advanced. Features USB (Universal Serial Bus) 3.0 Internal Connector
- 2 port USB3.0 on the front panel Rugged Black coated interior The Coolermaster HAF features a fully-rugged appearance & is housed in a tough casing to offer outstanding protection A rugged Coolermaster HAF comes equipped to operate with unparalleled thermal performance Patented finger-press buttons for quickly maintaining or upgrading 5.25” drive devices Removable HDD racks & cable management system for better cable routing & neatness Model RC-932-KKN5-GP Available Colour Black Dimension (W)243 x (H)560 x (D) 564 mm (W)9.6” x (H)22.0” x (D)22.2” Weight 13.4kg / 29.5lbs Motherboards Micro
- ATX / ATX / E-ATX Expansion Slots 7 5.25" Drive Bay 5 (without the use of exposed 3.5" drive bay) 3.5" Drive Bay 5 Hidden 1 Exposed (converted from one 5.25" drive bay) 2.5" Drive Bay 4 (converted from two 3.5" drive bay) Cooling System Front: 230 x 30mm Red LED Fan x 1, 700 RPM, 19 d BA Side: 230 x 30mm Standard Fan x 1, 700 RPM, 19 d BA (support 120 x 25 Fan x 4) Top: 230 x 30mm Standard Fan x 1, 700 RPM, 19 d BA (support 120mm Fan x 3 or 120mm x 1 + 230 x 30mm x 1) Rear: 140 x 25mm Standard Fan x 1, 1200 RPM, 17 d BA (support 120 x 25mm Fan x 1) I/O Panel USB (Universal Serial Bus) 3.0 x 2 USB (Universal Serial Bus) 2.0 x 4, IEEE1394a x 1, Mic x 1, Audio x 1 Power Supply Standard ATX PS2 / EPS 12V (not included) Warranty 2 years

...

HAF Stacker
- the first expandable system that allows externally modular upgrades. The HAF 915F/R is a Mini-ITX case with removable
...

Case A "mid tower" version of the HAF X, which comes with full tower features for PC enthusiasts. It supports up to four 200mm fans to keep constant cooling while housing high-end components, such as AMD Radeon HD 7970 & NVIDIA GTX 680. It also supports up to 9 HDDs & 8+1 expansion slots for 3-Way SLI/CF. The smart design of latch on side panel & sliding PSU cable cover ensures the convenience & neatness of system building. in addition, HAF XM is equipped with two USB (Universal Serial Bus) 3.0 ports for faster data transfer. * Enthusiast case with the support for four 200mm fans * Latch on 90° rotated side panel for easy system access * Rich I/O panel with two USB (Universal Serial Bus) 3.0 super speed ports * 8+1 expansion slots for NVIDIA 3-way SLI™ & AMD Cross Fire X™ * Supports up to 9 HDDs, including two X-Dock slots & one behind the motherboard tray * Sliding PSU cable cover for enhanced cable management * Top compartment with rubber pad for placing personal belongings * Mesh on front panel, top cover; vents on side panel & bottom for excellent cooling Available Color Full Midnight Black Material Appearance: Mesh, Synthetics; Case body: Steel Dimension (W / H / D) 252 x 530.5 x 579 mm / 9.9 x 20.9 x 22.8 inch Weight 10.5kg / 23.1 lb M/B Type Micro-ATX, ATX, E-ATX 5.25" Drive Bays 3 3.5" Drive Bays 8 (hidden:6, X-Dock:2) 2.5" Drive Bays 9 (6 are converted from 3.5" bays, X-Dock x 2, 1 is behind the M/B tray) I/O Panel USB (Universal Serial Bus) 3.0 x 2 (int.), USB (Universal Serial Bus) 2.0 x 2, Audio In & Out x 1 (supports HD Audio), LED switch for the front fan Expansion Slots 8+1 Cooling System Front: 200mm Red LED fan x 1 (converted to 120mm fan x 2 / 140mm fan x 1) Top: 200mm fan x 2 (1 is optional; converted to 120/140mm fan x 2) Rear: 140mm fan x 1 (converted to 120mm fan x 1) Side: 200mm fan x 1 (optional; converted to 140mm fan x 2) HDD: 12025mm fan x 2 (optional) Power Supply Type Standard ATX PS2 / EPS (optional) Maximum Compatibility VGA card length: 354.0 mm / 13.9 inch (with HDD cage) 463.0 mm / 18.2 inch (without HDD cage) CPU cooler

Height: 196.0 mm / 7.7 inch PSU GX-Lite power supply is the light version from the original GX series, it specifically targeted at systems in the mid to high range, yet reasonably priced, providing users with unsurpassed cost per performance. Features single highly 12 V rail, proficiently delivering power all the way up to 86%-88%, also supports most demanding components including the processor, drives & cooling fans. The GX-Lite Series will keep the power in your hands. High Efficiency Delivers at least 86%-88% efficiency on regular loading. Intel Compliant ATX12V v 2.3 & EPS version 2.91 compliant. Single 12 V Power Rail Tackling challenges from the most power-intensive peripherals head on, this solitary 12 V power rail provides ample power & strong resistance to any overloading. Double-Layer EMI Filter Dual protection from electromagnetic interference, thus restraining noise & interference for greater protection for you & your connections. Intelligent Fan Speed Control 120 mm silent fan with built-in fan control provides first class airflow & low noise level. Active PFC+ PWM Combo Controller Integrating this active controller will increase the efficiency of any computer, making PFC higher than 99%. Massive Bulk Capacitor Producing hold times >17ms upon full loading. & More -Over Voltage Protection (OVP), Over Power Protection (OPP), Short Circuit Protection (SCP) offers maximum safety to your system -MTBF 100, 000 hours for high reliability. -Three years warranty worldwide. Model RS-700-ASAB Type Intel ATX 12V V2.3 Dimension (W / H / D) 150 x 140 x 86 mm 5.9 x 5.5 x 3.4 inch Input Voltage 180-264V (Auto Range) Input Current 6A Input Frequency Range 47 Hz-53 Hz PFC Active PFC (>0.9) Power Good Signal 100-500ms Hold Up Time 17ms Efficiency 88% Typically MTBF 100, 000 Hours Protection OVP / OPP / SCP Output Capacity 700W Operation Temperature 0~40°C (Nominal Input Voltage) Regulatory TUV / GOST / CE / C-Tick / CCC / KC Fan 120mm Connector M / B 24 pins x 1 CPU 4 + 4 pins x 2 PCI-e 6+2 pins x 4 SATA x 6 Peripheral 4 pins x 3 Floppy 4 pins x 1

...

Coolermaster Hyper T4 Intel & Amd Socket Heatpipe Cooling Fan The Cooler Master Hyper T4 is an affordable mainstream Heatsink delivering great cooling performance on all modern platforms thanks to its 4 specially shaped direct touch Heatpipes. The T4’s 120mm PWM fan features a wide fan speed range & can be fine tuned for maximum airflow & cooling performance or silent operation. Thanks to this flexibility, a quick & easy snap-on fan bracket & a universal mounting system the Hyper T4 is a great match for any system. 4 Direct Contact heatpipes for seamless contact between cooler & CPU. 120mm wide range PWM fan, RPM can be fine tuned for maximum airflow or whisper quiet operation. Snap-On fan brackets to quickly & easily install, remove, clean or replace the fan or heatsink. Versatile all-in-one mounting solution supporting the Intel LGA 2011/1366/1156/1155/1150/775 & AMD FM2/FM1/AM3+/AM3 /AM2. Model
- RR-T4-18PK-R1 CPU Socket
- Intel LGA 2011/1366/1156/1155/1150/775 AMD FM2/FM1/AM3+/AM3/AM2 Dimension
- 131.6 x 72.5 x 152.3 mm (5.2 x 2.9 x 6 in) Heat Sink

Dimensions
- 128 x 44 x 152.3 mm (5 x 1.7 x 6 in) Heat Sink Material
- 4 Direct Contact Heatpipes / Aluminum Fins Heat Sink Weight
- 448 g / 1 lb Heat Pipes

Dimensions
- 6mm Fan Dimension
- 120 x 120 x 25 mm (4.7 x 4.7 x 1 in) Fan Speed
- 600~1800 RPM (PWM) ± 10% Fan Airflow
- 24~70 CFM ± 10% Fan Air Pressure
- 0.3~2.14 mm H2O ±10% Fan Life Expectancy
- 40, 000 hours Fan Noise Level (d B-A)
- 15.1~31.6 d BA Bearing Type
- Rifle bearing Connector
- 4-Pin Fan Rated Voltage
- 12 VDC Fan Rated Current
- 0.2A Power Consumption
- 2.64 W Fan Weight
- 100 g / 0.22 lb






















...

Cooler Master K-series K280 CASE DESCRIPTION K280 is budget-conscious mid-tower case. A stylish matte black coating & aggressive design accents give K280 a futuristic look. A front mesh panel, support for up to three fans, & an optional 120mm fan with mounting points on the side panel ensure that the airflow is optimized for dissipating heat. K280 comes with three 5.25” bays, space for 7 HDDs (2 of which are tool-free), & one internal SSD. Long graphics cards, such as NVIDIA GTX 690 & AMD HD 7990 fit inside the roomy interior. & the super speed USB (Universal Serial Bus) 3.0 port provides a quicker access for files transfer & smart phone / tablet charging. - Airflow optimized design
- mesh on front panel, vents on side panel, bottom, & rear
- Supports up to three 120mm fans
- Side panel with fan mounting to cool graphics cards
- Super speed USB (Universal Serial Bus) 3.0 port for 10x faster file transfer & 2x faster phone/tablet charging
- Supports high-end graphics cards up to 315mm/12.4”, including NVIDIA GTX 690 & AMD HD 7990
- 7 HDD bays (2 tool-free) for increased expandability Specifications Available Color Full Midnight Black Material SGCC, HIPS Plastic, Mesh front bezel Dimension (W / H / D) 219 x 429 x 480mm / 8.6 x 16.9 x 18.9 inch Weight 4.4kg / 9.7 lbs M/B Type Micro-ATX, ATX 5.25" Drive Bay 3 (exposed) 3.5" Drive Bay 1 (exposed), 6 (hidden) I/O Panel USB (Universal Serial Bus) 3.0 x 1 (internal), USB (Universal Serial Bus) 2.0 x 1, Mic x 1, Audio x 1 (supports AC97 / HD audio) Expansion Slots 7 Cooling System Front: 120mm fan x 1 Rear: 120mm fan x 1 (optional) Side: 120mm fan x 1 (optional) Power Supply PS2 2.5"/3.5"- SATA HDD Drive Bay 1 (hidden) Maximum Compatibility VGA card length: 315mm / 12.4 inch CPU cooler

Height: 162mm / 6.4 inch Coolermaster Elite Power 500W PSU DESCRIPTION, The reliable, efficient & affordable line of Elite power supplies is ideal for mainstream & basic computing systems. Built with quality components & dual +12V outputs, the Elite series is fit to handle demands of high power requirements. The eco-friendly design allows the Elite series to reach more than 70% efficiency at typical loading & meet Energy Star & Blue Angel requirements. Compliance with the newest Intel standard ATX 12V V2.3 More than 70% efficiency at typical load operation High performance components design for better reliability Green power design to meet Energy Star & Blue Angel requirements Multiple protection design (OVP/OCP/OPP/SCP) Support dual +12V1 & +12V2 outputs for higher power usage One 4+4 pin +12V CPU connector for high-end CPU EMI & Noise filter built in design 2 Year warranty Model RS500-PSARJ3-UK Type Intel ATX12V V2.31 Dimension (W / H / D) 150 x 86 x 140 mm Input Frequency Range 47 ~ 63 Hz PFC Regular Power Good Signal 100 ~ 500 ms Hold Up Time >17 ms Efficiency >70% Typically MTBF >100, 000 hrs Protection OVP / OCP / OPP / SCP Output Capacity 500W Operation Temperature 0~40?C (Nominal Input Voltage) Fan 120mm Certifications CE / GOST / C-tick Connector M/B 20+4 Pin x 1 CPU 4+4 Pin x 1 4 Pin Peripheral x 3 SATA x 4 4 Pin Floppy x 1 6 Pin PCI-e Connector x 1







...

Cooler Master K-series K350 CASE DESCRIPTION K350 brings an aggressive gaming look & high-end features to the enrty-level mid tower segment. It supports the latest ATX & micro-ATX motherboards & long graphics cards like GTX 690. It features three tool-free 5.25” bays, & space for 6 additional internal HDDs, 3 of which are tool-free. Thanks to its silent 120mm fan & side panel window the K350 not only looks & sounds good, but managed to keep the system cool. & the USB (Universal Serial Bus) 3.0 Super Speed port provides easy access to faster data transfer & smart phones/tablets charging.
- Airflow optimized - mesh on front panel, large vents in the top, rear, bottom, & on the left side panel
- Super Speed USB (Universal Serial Bus) 3.0 port for 10x faster data transfer & 2x faster phone/tablet charging
- Comes with a silent 120mm fan in the front; supports up to 4 fans
- Large side panel window with fan mounting
- Supports high-end graphics cards (GTX 690 & HD 7990)
- 7 HDD bays (3 tool-free) & 7 expansion slots for great expandability Available Color Full Midnight Black Materials SECC, Polymer, Mesh front panel Dimension (W / H / D) 200 x 424.6 x 479.5 mm / 7.8 x 16.7 x 18.8 inch Net Weight 4.6kg / 10.14 lbs M/B Type Micro-ATX, ATX 5.25" Drive Bays 3 (exposed) 3.5" Drive Bays 1 (exposed), 6 (hidden) I/O Panel USB (Universal Serial Bus) 3.0 x 1 (internal), USB (Universal Serial Bus) 2.0 x 1, Mic x 1, Audio x 1 (Supports AC97 / HD Audio) Expansion Slots 7 Cooling System Front:120mm fan x 1 Rear: 120/90/80mm fan x 1 (optional) Bottom: 120mm fan x 1 (optional) Side: 120mm fan x 1 (optional) Power Supply Type PS2 Maximum Compatibility VGA card length: 315mm / 12.4 inch CPU cooler

Height: 148.5mm / 5.8 inch COOLERMASTER ELITE POWER 500W PSU DESCRIPTION The reliable, efficient & affordable line of Elite power supplies is ideal for mainstream & basic computing systems. Built with quality components & dual +12V outputs, the Elite series is fit to handle demands of high power requirements. The eco-friendly design allows the Elite series to reach more than 70% efficiency at typical loading & meet Energy Star & Blue Angel requirements. Compliance with the newest Intel standard ATX 12V V2.3 More than 70% efficiency at typical load operation High performance components design for better reliability Green power design to meet Energy Star & Blue Angel requirements Multiple protection design (OVP/OCP/OPP/SCP) Support dual +12V1 & +12V2 outputs for higher power usage One 4+4 pin +12V CPU connector for high-end CPU EMI & Noise filter built in design 2 Year warranty Model RS500-PSARJ3-UK Type Intel ATX12V V2.31 Dimension (W / H / D) 150 x 86 x 140 mm Input Frequency Range 47 ~ 63 Hz PFC Regular Power Good Signal 100 ~ 500 ms Hold Up Time >17 ms Efficiency >70% Typically MTBF >100, 000 hrs Protection OVP / OCP / OPP / SCP Output Capacity 500W Operation Temperature 0~40?C (Nominal Input Voltage) Fan 120mm Certifications CE / GOST / C-tick Connector M/B 20+4 Pin x 1 CPU 4+4 Pin x 1 4 Pin Peripheral x 3 SATA x 4 4 Pin Floppy x 1 6 Pin PCI-e Connector x 1







...

Made to L-ast Crafted from A-grade aluminum, the L-STAND is designed to embrace your Mac Book with all the care possible. Thanks to the soft rubber lining in the L-shape it will keep your Mac Book safe & secure. An anti-grip layer underneath keeps it steady. Since it is shaped like an ‘L’ there is a lot of open space which increases the airflow. An increased airflow lowers the temperature of your Mac Book, which in case will increase its life expectation. L-STAND increases workspace Without the L-STAND you would place your Mac Book on your desk & connect it to a (Thunderbolt) display & peripherals such as a mouse & keyboard. Putting your Mac Book on your desk takes up a lot of space. With the L-STAND that inefficient workspace is history. You put your Mac Book in the st&, which means your Mac Book is in an upright position which clears up a lot of desk space. Finally you connect the cables from all the different peripherals & you have turned your Mac Book into a desktop. This way you are able to keep your desk clean & free from clutter. Perfect match By using a minimalistic design & high quality aluminum the L-STAND makes a perfect match with your Mac Book as it complements the elegant look. Cooler Master has over 20 years of experience with aluminum & uses that experience to create aluminum accessories for mobile devices. This philosophy is already shown in earlier launched products like the Wave St&. L-ike Feel free to let us know what you think of the L-ST&. We appreciate all the feedback we can get by both our own experts, but also from input by our customers to improve our products. Features display an Apple Mac Book in style one size fits all Apple Mac Books ideal to use while connected to external devices constructed from high-quality aluminium lined with anti-slip rubber grips for better traction Material Aluminium, Rubber, SPCC Dimensions: 200 x 100 x 287 mm Weight 800 grams ...