The ARCTIC F series is a high performance case fan for anyone looking for a quiet & efficient case fan. The refined "ninja-knife" impeller design not only improves the airflow, but it also lowers the noise level significantly. The ARCTIC F series fans remain inaudible even while running at full speed. The ARCTIC F series have a standard frame, making it possible to install the fans either intaking or outtaking air in the PC case. The standard three-pin connector can easily be connected directly to mainboards. ...

The temperature sensor will detect the temperature within the computer chassis & it is programmed to maintain the temperature between 32°C & 38°C, meaning this case fan will automatically speed up when the temperature rises. Virtually Silent The patented fan holder in combination with the anti-vibration parts (vibration absorber) ensure that the PC fan is running at a very low noise level, & thus serve as a virtually silent chassis fan option. Excellent Air flow Its unique fan blades boost the volume of air flow by 20% comparing with generic case fans to facilitate efficient ventilation. Quick & Easy Installation Installation is a snap with the four screws which are included in the box. Alternatively, it is compatible with screwless mounting on the chassis (if applicable). ...

The intelligent programmed temperature controller & accurate temperature detection make Arctic F Pro TC the best TC fans. Unlike other generic temperature controlled case fans, the Arctic F Pro TC fan provides cooling according to not only the temperature, but also the overall necessity for cooling. The programmed temperature controller plays a key role. Once a gaming system is at load, the case ambient air temperature will go up speedily, & without any case fans, most likely it will rise above 40°C, an overheated level for most PC cases. High performance & instant cooling is vital at this stage in order to eliminate the risk of overheating & system instability. The Arctic F Pro TC is programmed to achieve top fan speed at 38°C. The fan responses to the rise in temperature swiftly
- within a critical 6°C range, the rpm of the Arctic F Pro TC fan increases from around 500 to its maximum of 2, 000 rpm. Heat is dissipated from the case rapidly in order to achieve immediate cooling. As a result, the case air temperature remains at 38°C or below & thus the possibility of having a system failure can be eliminated. Long Service Life The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life. Innovative Design Enables Quiet & Efficient Ventilation The innovative design of the fan blades improves the air flow & facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow & pressure. Patented Anti-Vibration-System A unique anti-vibration system in combination with the patented fan holder ensure a near-silent operation. Ideal Temperature Control The temperature sensor is on a 40 cm cable & can be placed in the warm areas of your computer. This assures temperatures no higher than 38°C anywhere in the case & supports the cooling of your CPU or graphics card. On the other side this fan keeps the noise level absolutely minimal & only increases the speed if necessary.
...

he ARCTIC F PWM forward the PWM signal from the CPU to the whole case ventilation system. The entire system is cooled quietly, but still offers the superb performance when needed. Versatile Applicable With the standard 25mm frame, the ARCTIC F PWM can be applied as intake or outtake system fan. Silent Operation Thanks to fluid dynamic bearing & the patented fan holder design, the ARCTIC F PWM is not only quiet, but also highly durable. Quick & Easy Setup Via the PWM signal, the CPU fan is controlled by the mainboard to reach the ideal temperature for the CPU. The patented PST (PWM Sharing Technology) is forwarding the PWM signal to all other fans inside the system. This way, all fans are spinning at the same speed. This provides silent operation in idle mode, but also gives sufficient performance, when required to offer efficient cooling. ...

Patented PWM Sharing Technology (F9 PRO PWM) It shares the same PWM signal as other PWM fans being used in the system so that they all run at optimal speed based on the CPU load. Ultra Quiet The patented fan holder in combination with the anti-vibration parts (vibration absorber) ensure that the PC fan is running at a very low noise level, & thus serves as a virtually silent chassis fan option. Massive Air flow Its unique fan blades boost the volume of air flow by 20% comparing with generic case fans to facilitate efficient ventilation. Quick & Easy Installation Installation is a snap with the four screws which are included in the box. Alternatively, it is compatible with screwless mounting on the chassis (if applicable). ...

Dedicated to operate 24 hours a day, 7 days per week, the F PWM CO series case fans cool your computer system quietly. The fan forwards the PWM signal from the CPU to the whole case ventilation system. Employing a Japanese dual ball bearing, the fan operates with reduced friction & hence its lifespan is substantially extended. The series offers you with superb performance while maintaining your computer systems under optimal temperature at all times. Continuous Operation "CO" stands for Continuous Operation & makes the case fans suitable for PCs with non-stop operation like servers. This feature is brought by the Japanese dual ball bearing used in the fans, which reduces rotational friction, meaning it is less sensitive to dust & high temperature & hence is up to 5 times more durable than generic or modified bearings. Constantly Silent Thanks to the dual ball bearing & the patented fan holder design, the F PWM CO series is not only quiet, but also long-lasting. Quick & Easy Setup Via a single PWM signal, the CPU fan is controlled by the mainboard to maintain the ideal temperature of the CPU. The patented PST (PWM Sharing Technology) forwards the PWM signal to all other fans within the system so that all fans are spinning at the same speed. Such mechanism ensures silent operation when it is idle, but also gives sufficient performance when the demand comes. ...

The ARCTIC F PWM forward the PWM signal from the CPU to the whole case ventilation system. The entire system is cooled quietly, but still offers the superb performance when needed. Versatile Applicable With the standard 25mm frame, the ARCTIC F PWM can be applied as intake or outtake system fan. Silent Operation Thanks to fluid dynamic bearing & the patented fan holder design, the ARCTIC F PWM is not only quiet, but also highly durable. Quick & Easy Setup Via the PWM signal, the CPU fan is controlled by the mainboard to reach the ideal temperature for the CPU. The patented PST (PWM Sharing Technology) is forwarding the PWM signal to all other fans inside the system. This way, all fans are spinning at the same speed. This provides silent operation in idle mode, but also gives sufficient performance, when required to offer efficient cooling. ...

No Setup Needed
- It Simply Works The ARCTIC F TC controls its speed by itself. Thanks to the temperature sensor, all you need
...

The Freezer 7 Pro Rev. 2 is the upgraded version of the renowned Freezer 7 Pro. With the flexible mounting design, this version is compatible with the Intel Core i 7, Core i 5, as well as AMD Socket AM3. Featuring an ultra-quiet 92 mm. fan & 6 heat pipes, the Freezer 7 Pro Rev. 2 is one of the most efficient & quiet CPU coolers for power users.

Features: Patented vibration absorption to eliminate buzzing sounds. Easy Installation. Ultra quiet 92 mm. PWM fan. Pre-applied MX-2. Excellent cooling performance: 130 Watts, 6 heat pipes & 42 fins for efficient heat dissipation. Compatible with Intel Core i 7 & Core i 5.

...

Superior Cooling Perfomance An interchangeable 120 mm PWM fan in combination with 4 direct touch heatpipes & a 48-fin heatsink enable the Freezer i 30 CO to deliver outstanding cooling performance & improve heat dissipation from the CPU. According to the test results from Hardware Secrets, its superior cooling performance surpassed the stock cooler & similar models by up to 34 degrees. Low Noise The test in Tom's Hardware has shown that the Freezer i 30 CO is the quietest cooler in their roundup. Thanks to the PWM control, the fan speed adjusts according to the CPU temperature & thus the noise level remains at an absolute minimum which qualifies it as a silent cooler. Click here to see how the PWM control settings can be changed according to your performance & noise preference. Sturdy Mounting Mechanism There is no need to worry about the weight of this muscular, yet gentle cooler. The Freezer i 30 CO is using a durable steel mounting clip & comes with a bundled back-plate*. As a result it has an excellent mounting stability & is fully transport-proof. * For Socket 2011, it is compatible with the existing back-plate Direct Touch Heatpipe Heatsink The Freezer i 30 CO heatsink consists of 4 double-sided direct touch heatpipes, 8mm in diameter. A patented process (20 2011 000 71.8) allows us to pack the heatpipes without gaps & thus increase the contact surface & achieve better flatness by precision machining
- both leading to an enhanced heat transfer. Continuous Operation "CO" stands for Continuous Operation & makes the cooler suitable for PCs with non-stop operation like servers. The Japanese dual ball bearing used in the "CO" fan reduces rotational friction considerably, is significantly less sensitive to dust & high temperature & hence up to 5 times more durable than other bearings. Compatibility Intel Socket: 2011, 1150, 1155, 1156 Max. Cooling Performance: 320 Watts Heatsink Direct Touch heatpipe & Oslash; 8 mm x 4 (double-sided) Aluminum fins x 48 (Thickness: 0.5 mm) Fan Diameter: 120 mm Fan Speed: 400
- 1, 350 RPM (Controlled by PWM) Airflow: 74 CFM / 125.7 m&sup 3;/h Noise Level: 0.3 Sone @ 1, 350 RPM Current / Voltage: 0.24 A / 12 V Power Consumption: 2.64 Watts

...