Antec’s HCG M power supplies are the perfect combination of power & efficiency. The HCG M features special heavy-duty High Current connectors & cabling that supply extreme levels of power, & superb efficiency thanks to 80 PLUS BRONZE certification & Active PFC. HCG M’s innovative 16-pin sockets create a new level of flexibility by doubling the modular connectivity, supporting two different 8-pins connectors & even future connectors of 10, 12, 14 or 16-pins. Highest-quality connectors, Japanese-brand capacitors, & a quiet 135 mm double ball bearing LED fan complete the package. Circuit Shield™ makes the HCG-850M safe & reliable in any environment with its nine industrial-grade protections. If loads of power, High Current engineering & extreme efficiency are what you’re after, the HCG M is the PSU for you.

Features: 850W Continuous Power
- Guaranteed 850W of Continuous Power from Antec 80 PLUS BRONZE certified
- Up to 88% efficient, to reduce your electricity bill AQ5
- Antec Quality 5 year warranty & lifetime global 24/7 support 16-pin Socket
- Industry-leading 16-pin sockets double the modular connectivity by supporting 2 different 8-pin cables per socket & allow for future connector changes 135 mm LED DBB Silence
- Whisper-quiet high-quality double ball bearing LED fan with long lifetime Thermal Manager
- An advanced low voltage fan control for optimal heat & noise management High Current Rails
- 2 +12V rails with high load capabilities ensure maximum CPU & GPU compatibility 98.8% +12V
- Output for maximum CPU & GPU support Multi PCI-E
- 4 PCI-E connectors for multiple GPU support NVIDIA SLI-Ready & AMD Crossfire certified
- Tested & certified by NVIDIA for SLI & AMD for Crossfire systems Circuit Shield™
- Full suite of industrial grade protections:
- Over Current Protection (OCP),
- Over Voltage Protection (OVP),
- Under Voltage Protection (UVP),
- Short Circuit Protection (SCP),
- Over Power Protection (OPP),
- Over Temperature Protection (OTP) & Surge & Inrush Protection (SIP) Japanese Heavy-Duty Caps
- High-performance Japanese capacitors ensure tightest DC stability & regulation Stealth Wires
- All wires darkened for minimal visibility in chassis




















...

Antec HCP-1000 1000W HCP Platinum 80+ Platinum 13.5cm PWM DBB Fan Jap Caps Description Antecs High Current Pro Platinum series is the pinnacle of power supplies. High Current Pro Platinum is fully modular with a revolutionary 20+8-pin MBU socket for the needs of tomorrow. By using a PSU that is 80 PLUS PLATINUM & Er P Lot 6: 2013 certified, operating up to 94% efficient, you can reduce your electricity bill by up to 25% when compared to many other power supplies. HCP Platinums innovative 16-pin sockets create a new level of flexibility by doubling the modular connectivity, supporting two different 8-pins connectors & even future connectors of 10, 12, 14 or 16-pins. Backed by a 7 year warranty & lifetime global 24/7 support, the HCP-1000 Platinum embodies everything a power supply can accomplish today. Key Features 1000W Continuous Power
- Guaranteed 1000W of Continuous Power from Antec 80 PLUS PLATINUM certified
- Up to 94% efficient, to reduce your electricity bill 135 mm DBB Silence
- Whisper-quiet high-quality double ball bearing fan with long lifetime High Current Rails
- 4 High Current +12V rails with high load capabilities ensure maximum CPU & GPU compatibility All Japanese Heavy-Duty Caps
- All high-performance Japanese capacitors ensure tightest DC stability & regulation AQ7
- Antec Quality 7 year warranty & lifetime global 24/7 support Detailed Specifications Dimensions: 150mm x 86mm x 190mm (W x H x D) Input Voltage: 100-240 VAC Input Current: 6.5A Input Frequency Range: 50-60 Hz PFC: Active PFC (>.99) Power Good Signal: 100-500 ms Hold Up Time: >17ms Efficiency: 94% MTBF: 100, 000 Hours Protection: OCP / OVP / UVP / OPP / SCP / BOP / SIP / NLO Power: 1000w Operation Temperature: 0-40°C Safety: UL, c UL, CB, CE, FCC, T œV, BSMI, CCC, C-Tick, GOST Cooling: 135mm Ultra Silent Fan Noise: < 17 d BA 80 Plus Certified: Yes
- 80 Plus Platinum Certification: n Vidia SLi Certified ATi Crossfire Certified






...

Antec HCP-1300 1300W 80+ Platinum Certified PSU Description Antecs High Current Pro Platinum series is the pinnacle of power supplies. High Current Pro Platinum is fully modular with a revolutionary 20+8-pin MBU socket for the needs of tomorrow. By using a PSU that is 80 PLUS PLATINUM & Er P Lot 6: 2013 certified, operating up to 94% efficient, you can reduce your electricity bill by up to 25% when compared to many other power supplies. HCP Platinums innovative 16-pin sockets create a new level of flexibility by doubling the modular connectivity, supporting two different 8-pins connectors & even future connectors of 10, 12, 14 or 16-pins. All cables are darkened to become Stealth Wires & are thus nearly invisible in your chassis. 4 High Current Rails & a 100% +12V output ratio maximize HCP-1300 Platinums capabilities to power the latest CPUs & GPUs. HCP Platinums Phase Wave Design is a server-class full-bridge LLC design with a synchronous rectification based on a DC-DC topology. All Japanese capacitors achieve unprecedented tight voltage regulation & low ripple & noise to maximize your systems performance. Antecs intelligent Thermal Manager fan control spins the high-quality 13.5cm DBB fan optimally to cool your PSU quietly. Circuit Shield makes the HCP-1300 Platinum safe & reliable in any environment with its nine industrial-grade protections. Backed by a 7 year warranty & lifetime global 24/7 support, the HCP-1300 Platinum embodies everything a power supply can accomplish today. Key Features 1300W Continuous Power
- Guaranteed 1300W of Continuous Power from Antec 80 PLUS PLATINUM certified
- Up to 94% efficient, to reduce your electricity bill Save Energy & Money
- Reduce your electricity bill by up to 25% AQ7
- Antec Quality 7 year warranty & lifetime global 24/7 support 16-pin Socket
- Industry-leading 16-pin sockets double the modular connectivity by supporting 2 different 8-pin cables per socket & allow for future connector changes 28 (20+8)-pin MBU socket
- Worlds first socket for possible future MBU connectors 135 mm DBB Silence
- Whisper-quiet high-quality double ball bearing fan with long lifetime Thermal Manager
- An advanced low voltage fan control for optimal heat & noise management High Current Rails
- 4 High Current +12V rails with high load capabilities ensure maximum CPU & GPU compatibility 100% +12V
- Output for maximum CPU & GPU support Multi PCI-E
- 10 PCI-E connectors for multiple GPU support OC Link
- Allows 2 HCP Platinums to work in tandem to power the most demanding systems Circuit Shield
- Full suite of industrial grade protections: Over Current Protection (OCP), Over Voltage Protection (OVP), Under Voltage Protection (UVP), Short Circuit Protection (SCP), Over Power Protection (OPP), Over Temperature Protection (OTP), Surge & Inrush Protection (SIP), No Load Operation (NLO) & Brown-Out Protection (BOP) All Japanese Heavy-Duty Caps
- All high-performance Japanese capacitors ensure tightest DC stability & regulation Phase Wave Design
- A server-class full-bridge LLC design with a synchronous rectification based on a DC-DC topology Stealth Wires
- All wires darkened for minimal visibility in chassis Connectors 24 Pin Main Connectors:1 4+4 Pin 12V Connectors:1 8-Pin 12V Connectors:1 SATA Connectors:9 4-Pin Molex Connectors:6 6+2 Pin PCI-e Connectors:10 Floppy Drive Connectors:1 Detailed Specifications Dimensions: 150mm x 86mm x 190mm (W x H x D) Input Voltage: 100-240 VAC Input Current: 15A-7A Input Frequency Range: 50-60 Hz PFC: Yes
- Power Factor Control Power Good Signal: Hold Up Time: Efficiency: 80 PLUS PLATINUM certified
- Up to 94% efficient MTBF: Protection: OCP / OVP / UVP / SCP / OPP / OTP / SIP / NLO / BOP Power: 1300W Operation Temperature: 0-50°C Safety: UL, c UL, CB, CE, FCC, TUV, BSMI, CCC, C-Tick, GOST Cooling: Noise: 80 Plus Certified: Yes
- 80 Plus Platinum


















...

Antec HCP-1300 1300W 80+ Platinum Certified PSU 13.5cm DBB Fan Jap Caps Description Antec’s High Current Pro Platinum series is the pinnacle of power supplies. High Current Pro Platinum is fully modular with a revolutionary 20+8-pin MBU socket for the needs of tomorrow. By using a PSU that is 80 PLUS PLATINUM & Er P Lot 6: 2013 certified, operating up to 94% efficient, you can reduce your electricity bill by up to 25% when compared to many other power supplies. HCP Platinum’s innovative 16-pin sockets create a new level of flexibility by doubling the modular connectivity, supporting two different 8-pins connectors & even future connectors of 10, 12, 14 or 16-pins. All cables are darkened to become Stealth Wires & are thus nearly invisible in your chassis. 4 High Current Rails & a 100% +12V output ratio maximize HCP-1300 Platinum’s capabilities to power the latest CPU’s & GPU’s. HCP Platinum’s Phase Wave Design is a server-class “full-bridge” LLC design with a synchronous rectification based on a DC-DC topology. All Japanese capacitors achieve unprecedented tight voltage regulation & low ripple & noise to maximize your system’s performance. Antec’s intelligent Thermal Manager fan control spins the high-quality 13.5cm DBB fan optimally to cool your PSU quietly. Circuit Shield makes the HCP-1300 Platinum safe & reliable in any environment with its nine industrial-grade protections. Backed by a 7 year warranty & lifetime global 24/7 support, the HCP-1300 Platinum embodies everything a power supply can accomplish today. Key Features 1300W Continuous Power
- Guaranteed 1300W of Continuous Power from Antec 80 PLUS PLATINUM certified
- Up to 94% efficient, to reduce your electricity bill Save Energy & Money
- Reduce your electricity bill by up to 25% AQ7
- Antec Quality 7 year warranty & lifetime global 24/7 support 16-pin Socket
- Industry-leading 16-pin sockets double the modular connectivity by supporting 2 different 8-pin cables per socket & allow for future connector changes 28 (20+8)-pin MBU socket
- Worlds first socket for possible future MBU connectors 135 mm DBB Silence
- Whisper-quiet high-quality double ball bearing fan with long lifetime Thermal Manager
- An advanced low voltage fan control for optimal heat & noise management High Current Rails
- 4 High Current +12V rails with high load capabilities ensure maximum CPU & GPU compatibility 100% +12V
- Output for maximum CPU & GPU support Multi PCI-E
- 10 PCI-E connectors for multiple GPU support OC Link
- Allows 2 HCP Platinums to work in tandem to power the most demanding systems Circuit Shield
- Full suite of industrial grade protections: Over Current Protection (OCP), Over Voltage Protection (OVP), Under Voltage Protection (UVP), Short Circuit Protection (SCP), Over Power Protection (OPP), Over Temperature Protection (OTP), Surge & Inrush Protection (SIP), No Load Operation (NLO) & Brown-Out Protection (BOP) All Japanese Heavy-Duty Caps
- All high-performance Japanese capacitors ensure tightest DC stability & regulation Phase Wave Design
- A server-class full-bridge LLC design with a synchronous rectification based on a DC-DC topology Stealth Wires
- All wires darkened for minimal visibility in chassis Connectors 24 Pin Main Connectors:1 4+4 Pin 12V Connectors:1 8-Pin 12V Connectors:1 SATA Connectors:9 4-Pin Molex Connectors:6 6+2 Pin PCI-e Connectors:10 Floppy Drive Connectors:1 Detailed Specifications Dimensions: 150mm x 86mm x 190mm (W x H x D) Input Voltage: 100-240 VAC Input Current: 15A-7A Input Frequency Range: 50-60 Hz PFC: Yes
- Power Factor Control Power Good Signal: Hold Up Time: Efficiency: 80 PLUS PLATINUM certified
- Up to 94% efficient MTBF: Protection: OCP / OVP / UVP / SCP / OPP / OTP / SIP / NLO / BOP Power: 1300W Operation Temperature: 0-50°C Safety: UL, c UL, CB, CE, FCC, TUV, BSMI, CCC, C-Tick, GOST Cooling: Noise: 80 Plus Certified: Yes
- 80 Plus Platinum


















...

Antec's HCP-750 unifies raw power with advanced PSU engineering to meet the demands of high performing PCs. A full-featured, 80 PLUS Gold certified unit, HCP-750 is capable of outputting 100 percent of its rated power on its four +12V rails to ensure CPU & graphics card compatibility. Exclusive to the High Current series, HCP-750 boasts High Current heavy-gauge 16 AWG wiring that boosts conductivity, increasing efficiency & improving power delivery. In addition, a double-layer PCB & onboard DC-to-DC converters provide substantial voltage stability. To tackle the needs of your system, pick up Antec's HCP-750.

Features: 750 watts of Continuous Power 80 PLUS™ Gold certified
- up to 92% efficient NVIDIA SLI-Ready certified, ATI Cross Fire X™ certified Intelligent Hybrid Cable Management utilizes a 10-pin modular connector system Special heavy-gauge 16 AWG High Current cable for CPU connectors boosts conductivity, increasing efficiency & improving power delivery 2 x 8-pin CPU connectors included for dual-CPU gaming, server applications & high-end motherboards Gold-plated high-current terminals for optimal conductivity 135 mm double ball bearing PWM fan for optimal & quiet cooling Four fully-protected High Current +12V rails ensure high-end CPU & graphics cards compatibility Up to 100% power available on +12V rails DC-to-DC voltage regulator modules ensure stability & higher efficiency Highest quality Japanese brand capacitors for long-term reliability Double-layer PCB allows for heavy-duty components ATX12V version 2.3 & EPS12V version 2.92 compliant Full suite of industrial grade protection:
- Over current protection (OCP)
- Over voltage protection (OVP)
- Short circuit protection (SCP)
- Over power protection (OPP)
- Over temperature protection (OTP) All cables braided & wrapped for better airflow & neatness Universal Input – works on any 100V
- 240V grid Active PFC with PF: 0.99 MTBF: 100, 000 hours Meets 2010 EUP requirement: 5 Vsb < 1W AQ5 Antec Quality 5-year limited warranty on parts & labor Safety: c UL, Tu V, CE, CB, FCC, C-TICK, CCC, BSMI, Gost-R Dimensions: 3.4” (H) x 5.9” (W) x 7.1” (D) 86 mm (H) x 150 mm (W) x 180 mm (D) Net Weight: 5.5 lbs / 2.5kg








...

Going small shouldn't mean sacrificing form or function. The ISK110 VESA is crafted for small, efficient builds without compromises. Just 78 mm wide & mounted on a stable clip-on base or included VESA mount, it fits two 2.5" drive bays
- perfect for internal SSDs. Perforated mesh construction & space for a low-profile CPU cooler provide an ample amount of quiet cooling capability. An incredibly small yet powerful 90 watt adapter completes the package, providing power with up to 92% efficiency. Ideal for corporate builds, kiosks & digital signage, the ISK110 VESA is a miniscule case solution with massive features.

Features: VESA mount included 2 x 2, 5" internal drive bays ABS plastic / 0, 8 mm SECC construction

Includes:: standard case lock slot for integrated anti-theft protection Front ports:
- 4 x USB (Universal Serial Bus) 2.0
- HDA/AC'97-compatible audio in/out Motherboard compatibility: Mini-ITX only

Includes:: 90 watt external adapter:
- Efficiency: up to 92%
- DC-to-ATX PCB mounted directly inside case
- Universal Input — works on any 100V
- 240V electrical grid No expansion slots

Dimensions (chassis only):
- 222 mm (H) x 78 mm (W) x 212 mm (D)
- 8, 7" (H) x 3, 1" (W) x 8, 4" (D)

Dimensions (with VESA):
- 226 mm (H) x 85 mm (W) x 212 mm (D)
- 8, 9" (H) x 3, 4" (W) x 8, 4" (D) Packaging Dimensions:
- 260 mm (H) x 125 mm (W) x 340 mm (D)
- 10, 2" (H) x 4, 9" (W) x 13, 4" (D) Net Weight: 1, 3kg (2, 9 lbs) Gross Weight: 2, 2kg (4, 9 lbs)






















...

Mini-ITX is the next "big" thing. & now, Antec introduces the ISK 300-150, designed exclusively for Mini-ITX motherboards. With three drive bays, a quiet 80mm Tri Cool fan, & a stable 150-watt power supply, the ISK 300-150 can handle many of the tasks of a traditional PC, but in half the space. From petite desktop options to silent home theater, Antec's ISK 300-150 is an epic case of mini proportions. Power supply: 150-watt power supply Cooling system: 1 x side 80mm Tri Cool™ 3-speed exhaust fan 3 drive bays:
- External 1 x 5.25" slim optical bay
- Internal 2 x 2.5" HDD bays 1 half-height expansion slot Mini-ITX motherboard: 170mm (W) x 170mm (L) Convenient front ports:
- 2 x USB (Universal Serial Bus) 2.0
- 1 x e SATA
- Audio (AC’97 & HDA compatible) In & Out 0.8mm cold rolled steel frame for durability Case dimensions:
- 96mm (H) x 222mm (W) x 328mm (D)
- 3.8" (H) x 8.7" (W) x 12.9" (D) Packaging Dimensions:
- 295mm (H) x 380mm (W) x 195mm (D)
- 11.6" (H) x 15" (W) x 7.7" (D) Net weight: 5.5 lb / 2.5kg Gross weight: 8.3 lb / 3.8kg








...

Mini-ITX is the next "big" thing. & now, Antec introduces the ISK 310-150, designed exclusively for Mini-ITX motherboards. With three drive bays, a quiet 80mm Tri Cool fan, & a 150-watt power supply, the ISK 310-150 can handle many of the tasks of a traditional PC, in a fraction of the space. Plus, its stylish, silver front bezel will fit in perfectly with your existing multimedia components. From petite desktop options to silent home theater, Antec's ISK 310-150 is an epic case of mini proportions.

Features: Form Factor: Mini ITX Motherboard Support: Mini ITX PSU Support: Micro ATX Gaming Case: No Water Cooling Ready: No Dimensions: 222mm x 382mm x 96mm (W x H x D) Packaging Dimensions: 222mm x 382mm x 96mm (W x H x D) Body
Material: 0.8mm SECC Metal Front Bezel
Material: Silver front Bezel Side Panel: Vented External Bays: 1 x Slimline Optical Internal Bays: 2 x 2.5” Internal Drive Bay Notes: Expansion Slots: 1 x Half-Height Cooling Front: None Cooling Top: None Cooling Rear: None Cooling Side: 1 x side 80mm Tri Cool™ 3-speed exhaust fan Cooling Bottom: None IO Ports: 2 x USB (Universal Serial Bus) 3.0 1 x E-SATA 1 x HD Audio (Also Supports AC'97) 1 x Microphone Front Bezel
Colour: Silver Body
Colour: Black System Cabinet
Features: PSU Included: Yes
- Power Cable Included Net Weight (KGs): 2.5 KGs







...

Antec ISK 600 Gaming Cube Case Brushed 0.8mm Aluminium Panel USB3 FDB Fan Description The ISK600 is the newest addition to Antec’s award-winning ISK line of Mini-ITX cases. It is a versatile enclosure that matches any CEO’s desk, designer’s office, or family living room. It is designed exclusively for Mini-ITX motherboards & barely takes up desk. In addition to 0.8mm SECC steel, the ISK600 features elegantly designed brushed aluminum top & side panels. It will last for builds to come with space for a 12.5” graphics card, 2 expansion slots, & three drive bays. Discover the power of the ISK600. Key Features High Quality Materials
- 0.8mm steel body with brush aluminum panels GPU Support
- Room for 12.5" GFX cards PSU Support
- Alll ATX Format GPUs are supported Cooling
- 1 x 120mm rear fan included Case Specifications Form Factor: Mini ITX Motherboard Support: Mini ITX PSU Support: Standard ATX Gaming Case: Yes Water Cooling Ready: Yes Dimensions: 260mm x 369mm x 195mm (W x H x D) Packaging Dimensions: 260mm x 369mm x 195mm (W x H x D) Body

Material: 0.8mm Steel Front Bezel

Material: Plastic Side Panel: Aluminium External Bays: 1 x Slimline Optical Internal Bays: 3 x 3.5” Internal 2 x 2.5” Internal Drive Bay Notes: Expansion Slots: 2 x Full Size Cooling Front: None Cooling Top: None Cooling Rear: 1 x 12cm Fan Cooling Side: None Cooling Bottom: None IO Ports: 1 x USB (Universal Serial Bus) 3.0 1 x USB (Universal Serial Bus) 2.0 1 x HD Audio (Also Supports AC'97) 1 x Microphone Front Bezel

Colour: Black/ Blue Body

Colour: Black System Cabinet

Features: PSU Included: No Net Weight (KGs): 2.95 KGs













...

This elegant mini-desktop boasts impressive performance & a remarkably svelte profile, perfect for system builders looking for a smaller chassis. Its slender footprint & included bracket allow it to fit vertically or horizontally into the tightest spaces. With a reliable high efficiency 80PLUS certified 350 Watt power supply & front USB (Universal Serial Bus), e SATA & audio ports, the Minuet 350 delivers the ideal blend of performance & convenience. 350 Watt 80PLUS certified power supply: Universal input, Active PFC & high efficiency design for superior environmentally-friendly operation, 80 PLUS certification means you’ll save money on your power bills Specifications: Antec Minuet 350 Slimline piano black Micro PC case with silver front panel 350 Watt 80PLUS certified power supply Universal input Active PFC & high efficiency design for superior environmentally-friendly operation 80 PLUS certification means you'll save money on your power bills 80mm Tri Cool fan with 3-speed switch control Low Profile, small form factor Front Ports: 2 x USB (Universal Serial Bus) 1 x e SATA 2 audio jacks 3 Drive bays in easy-to-install unified flip-out drive cage 1 x 5.25" external 1 x 3.5"external 1 x 3.5"internal 2 stands included for upright positioning Motherboard: micro ATX (9.6" x 9.6") Top panel with vents for maximum cooling for CPU & VGA card Unit dimensions: 3.8" (H) x 12.8" (W) x 16.8" (D) 9, 4cm (H) x 31, 9 (W) x 43, 9 (D) Weight: Net: 12, 6 lbs / 5, 7kg Gross: 15, 0 lbs / 6, 8kg ...