Aerocool Silent Master 20cm Quad Green LED Sleeve Bearing Fan Description: Aerocool introduces their br&-new 200mm fan. Great attention was paid to noise emissions, air flow & a thin design. The extra-long fan blades allowed all of these goals to be achieved in one magnificent fan! Key

Features: 200mm fan with large fans blades for more air flow & reduced noise Aerodynamic fan blade design 3-Pin to 4-Pin Connector Quad Green LEDs Sleeve Bearing Specifications:

Dimensions: 200mm x 200mm x 20mm Rate Voltage: 12V Starting Voltage: 9V (Power ON/OFF) Power Consumption: 3.0W Rated Current: 0.25A Speed: 800±200 R.P.M. Maximum Airflow: 76.0 CFM Air Pressure: 0.36.MM-H2O Noise: 18.0 d BA Bearing: Sleeve



...

Aerocool Silent Master 20cm Quad Red LED Sleeve Bearing Fan Description: Aerocool introduces their br&-new 200mm fan. Great attention was paid to noise emissions, air flow & a thin design. The extra-long fan blades allowed all of these goals to be achieved in one magnificent fan! Key

Features: 200mm fan with large fans blades for more air flow & reduced noise Aerodynamic fan blade design 3-Pin to 4-Pin Connector Quad Red LEDs Sleeve Bearing

Includes:: 4 x fan screws Specifications:

Dimensions: 200mm x 200mm x 20mm Rate Voltage: 12V Starting Voltage: <= 9V (Power ON/OFF) Power Consumption: 3.0W Rated Current: 0.25A Speed: 800±200 R.P.M. Maximum Airflow: 76.0 CFM Air Pressure: 0.36.MM-H2O Noise: 18.0 d BA Bearing: Sleeve





...

Aerocool Silent Master 20cm Quad White LED Sleeve Bearing Fan Description: Aerocool introduces their br&-new 200mm fan. Great attention was paid to noise emissions, air flow & a thin design. The extra-long fan blades allowed all of these goals to be achieved in one magnificent fan! Key

Features: 200mm fan with large fans blades for more air flow & reduced noise Aerodynamic fan blade design 3-Pin to 4-Pin Connector Quad White LEDs Sleeve Bearing

Includes:: 4 x fan screws Specifications:

Dimensions: 200mm x 200mm x 20mm Rate Voltage: 12V Starting Voltage: <= 9V (Power ON/OFF) Power Consumption: 3.0W Rated Current: 0.25A Speed: 800±200 R.P.M. Maximum Airflow: 76.0 CFM Air Pressure: 0.36.MM-H2O Noise: 18.0 d BA Bearing: Sleeve





...

Introduction Introducing the new " Strike-X" product series from Aerocool
- the ultimate gaming equipments for gamers
...

Introduction Introducing the new " Strike-X" product series from Aerocool
- the ultimate gaming equipments for gamers & enthusiasts
...

Introduction Introducing the new " Strike-X" product series from Aerocool
- the ultimate gaming equipments for gamers
...

Aero Cool offers the Strike X-series is a whole range of aggressively styled gaming hardware that is already clearly intended as a visual warning signal. The X-Strike Advance Tower is the perfect base for function & style to bring under one umbrella. For in addition to the design, the mid-tower has a practical design. The second key design component is the colour, which offers a black finish & red lights as an excellent contrast. This is guaranteed in addition to the two bright LED fan in the front frame elements. The I/O panel in the lid holds the audio ports, & the USB (Universal Serial Bus) 2.0 & USB (Universal Serial Bus) 3.0 ports. The black Mainboard tray is not only eye-catching, but also is practical. First, it is comparable in length & has space for large graphics cards & various brackets for cable attachment. On the other h&, the frame has a cutout for easy installation of a CPU backplate.
- Dimensions: 195 x 472 x 505 mm (W x H x D)
-

Material: Steel
- Weight: 7kg
- Motherboard Support: ATX, Micro ATX
- Side Cooling: 1x 120mm (20.9 d B (A) 1200RPM Red LED)
- Rear Cooling: 1x 120mm (20.9 d B (A), 1.200 RPM Red LED)
- Top Cooling: 1x 140mm (25 d B (A), 1200RPM Red LED)
- Front Cooling: 2 x 120 mm (optional)
- Bottom Cooling: 1x 120mm (optional)
- Drive Bays: 9 x 5.25 (external, max) / 1 x 3.5 inches (external, in the 5.25-inch slot) / 5 x 3.5 inches (internal, in the 5.25-inch drive bay) / 1 x 2.5 inches (internal)
- Power Supply: Standard ATX (optional)
- Expansion Slots: 7
- I/O panel: 1x USB (Universal Serial Bus) 3.0 / 1x USB (Universal Serial Bus) 2.0 / 1x each Audio In / Out
- Maximum graphics card length: 295 mm















...

Description An upgrade version of the original Strike-X case. The Strike-X Advance model features a brand new chassis with improvements to suit those heavy PC users such as gamers & DIY enthusiasts. This case offers great flexibility for great expansion with excellent cooling ability. With the HDD converters included in this case, user can easily install up to 7 x 2.5" HDDs or 3.5" HDDs. & furthermore, each converter also acts as a fan bracket for a 12cm fan to be mounted at the opposite side of the HDD to cool the heat that HDD generates. Moreover, the converters can also be mounted vertically to the front of chassis with a 12cm fan installed to draw in cool air to force out the heat to the rear of chassis. If you are concerned with the heat issue in a PC case & yet want to keep the expansion ability, Strike-X Advance is the case of your choice. Key Features High performance " Mid-Tower" for gamers & enthusiast. Aggressive "X" concept design case
- a gamers dream! Supports longer high-end VGA cards up to 295 mm. Supports 9 x 5.25" bays & maximum 6 x 2.5"/3.5" HDDs (internal) with HDD convertor bracket. Anti-vibration pad included to dampen PSU vibration. Each HDD bracket can mount a 12cm fan to cool HDD individually. Easy-install" screw-less kits for the 5.25" devices. 1 x USB2.0 + 1 x USB3.0 & Audio/ Mic ports are easily accessible from the top of case. CPU hole is pre-drilled on the Motherboard for easy access to cooler installation. Cable management holes are pre-drilled with high end rubber protection. Dust filter included to prevent dust entering from the bottom of case. Supports water-cooling Case Specifications Form Factor: Midi Tower Motherboard Support: ATX, Micro ATX PSU Support: Standard ATX Gaming Case: Yes Water Cooling Ready: Yes Dimensions: 190mm x 465mm x 490mm (W x H x D) Packaging Dimensions: 258mm x 527mm x 570mm (W x H x D) Body

Material: SECC 0.60mm Front Bezel

Material: ABS Plastic + Mesh Side Panel: SECC Window / SECC Vented External Bays: 9 x 5.25 External 6 x 3.5 External Internal Bays: 6 x 3.5 Internal 6 x 2.5 Internal Drive Bay Notes: 9 x 5.25" (external) & 6 x 3.5" or 2.5" (internal) with HDD convertor bracket Expansion Slots: 7 x Full Size Cooling Front: 2 x 12cm BLUE LED fans (included) Cooling Top: 1 x 14 fan BLUE LED fan (included) Cooling Rear: 1 x 12cm BLUE LED fan (included) Cooling Side: 1 x 12cm fan (optional) Cooling Bottom: 1 x 14cm fan (optional) (Fan screws must penetrate the dust filter) IO Ports: 1 x USB (Universal Serial Bus) 3.0 1 x USB (Universal Serial Bus) 2.0 1 x HD Audio (Also Supports AC'97) 1 x Microphone Front Bezel

Colour: White Body

Colour: White System Cabinet

Features: (1) Aggressive "X" concept design case- a gamers dream! (2) Anti-vibration pad included to dampen PSU vibration. (3) Each HDD bracket can mount a 12cm fan to cool HDD individually. (4) CPU hole is pre-drilled on the Motherboard for easy access to cooler installation. (5) Cable management holes are pre-drilled with high end rubber protection. (6) Dust filter included to prevent dust entering from the bottom of case. (7) Supports 1 x SSD. (8) Water Cooling Ready. PSU Included: No Net Weight (KGs): 6.35 KGs










...

Aero Cool Strike-X Air Open Chassis And now for something completely different! The Aerocool Strike-X AIR case is an open air chassis ideal for users who tamper with their PC on a regular basis. The new Strike-X AIR is a brand new PC open case concept fully developed by Aerocools design team that will make using the PC a brand new experience. Its open structure is designed in a way so that it is easy to access the internal components making it extremely to install and/or uninstall components. The supplied 200mm red LED fan can be positioned in three different ways depending on the desired cooling & installed components. For maximum cooling the closed location is recommended because it puts the 200mm fan as close to the motherboard as possible. The only downside with this is that it limits the maximum height of the CPU cooler that can be used. Positioning the fan in any of the other two locations would virtually remove this limitation. No matter what type of user you are & which components you decide to install in the Strike-X AIR chassis, its guaranteed to turn heads as there is no other case on the market that comes close to the uniqueness of this chassis. The chassis is in limited supply so dont delay, get one today & be the envy of your friends! Key Features State of the art Open Frame PC case design for all PC users! Excellent cooling performance for gamers & enthusiast. Ideal case for engineers & reviewers for benchmark testing. Solidly constructed "ALL BLACK" chassis interior of 0.7mm SECC Japanese Steel w/PCI plate & mesh highlighted in red. Supports longer high-end VGA cards up to 330 mm. Supports 3 x 5 1/4" bays & 3 x 2.5"/3.5" HDDs (hot-swap) Removable ODD cage for easy ODD installation 3 x SATA extension cables included 1 x USB (Universal Serial Bus) 3.0 + 3 x USB (Universal Serial Bus) 2.0 & Audio/ Mic ports are easily accessible from the front panel. Pre-drilled holes for cable management with high-end rubber protection to help tidy up the cable mess. CPU holes is pre-drilled on the MB plate for ease of CPU cooler assembly.

Includes:: anti-vibration pad to protect your PSU from shock. Supports the latest XL-ATX MB such as Gigabytes latest X58-UD9 Motherboard & also has 10 PCI slots to support Quad VGA cards. Water-cooling holes are pre-drilled to support water-cooling systems!! 1 x 20cm RED LED top fan included. 1 x 12cm RED LED fan for HDD cooling included. Case Specifications Form Factor: Open Frame Motherboard Support: ATX, Micro ATX, Extended ATX PSU Support: Standard ATX, Micro ATX, Extended ATX Gaming Case: Yes Water Cooling Ready: No Dimensions: 613mm x 340mm x 535mm (W x H x D) Packaging Dimensions: 695mm x 410mm x 625mm (W x H x D) Body

Material: 0.7mm SECC Metal Front Bezel

Material: Plastic & Metal Side Panel: Plastic & Metal External Bays: 3 x 5.25 External Internal Bays: 3 x 3.5 Internal 3 x 2.5 Internal Drive Bay Notes: Supports Total of 3 x 3.5"/2.5" Maximum At Once Expansion Slots: 10 x Full Size Cooling Front: None Cooling Top: 1 x 20cm Red LED Fan Included Cooling Rear: None Cooling Side: 1 x 12cm Side Fan Included
- to the side of the HDD Rack for Direct HDD Cooling Cooling Bottom: None IO Ports: 1 x USB (Universal Serial Bus) 3.0 3 x USB (Universal Serial Bus) 2.0 3 x E-SATA 1 x HD Audio 1 x Microphone Front Bezel

Colour: Black/ Red Body

Colour: Black/ Red System Cabinet

Features: PSU Included: No Net Weight (KGs): 6.35 KGs












...

From the Aerocool families, the Strike-X gaming series introduces the Strike-X Cube Gaming case! The mean looking cube case is compact with the Motherboard tray horizontally placed to ensure the steadiness of the MB & its cooler, & amazingly it supports the installation of 240mm/280mm watercooling system
- not one but two watercooling systems!! Hard to believe? Come & check it out! Features Super cube gaming case solidly built with 0.7mm Steel Unique side bar design to take the strength of chassis to the next level PSU bracket makes installation of PSU easier Largely increased airflow by mesh design of front & top panels Completely removable ODD rack for ease of installing water cooling system Most parts can be removed by screw drivers for personal molding needs Supports DUAL 240/280mm water cooling radiators Pre-drilled holes for cable management to reduce cable mess Pre-drilled holes for water cooling tubes Supports internal 3x 3.5"HDD (also compatible with 2.5") & 2x 2.5"HDD/SSD under ODD rack Supports dual high-end graphic cards up to 320mm (345mm when front 20cm fan removed) Supports both Mini ITX & Micro ATX motherboard Supports max. CPU cooler height of 190mm Supports all PSU lengths Super-silent 20cm fan & 14cm fan included for front & rear cooling Supports up to 1 x 20cm, 2 x 12cm, or 2 x 14cm fans on top panel Supports up to 1 x 20cm, 2 x 12cm or 2 x 14cm fans on front panel (1 x 20cm pre-installed) Supports up to 2 x 12cm or 2 x 14cm fans on rear panel (1 x 14cm pre-installed) Magnetic PSU dust filter can be easily removed for cleaning HDD rack is double-secured by 2 screws to ensure the precious data don’t get damaged during transportation Shock-proof rubber pads for 3.5" HDDs & PSU 2x USB3.0/ HD Audio & MIC Separate fan positions for exhausting the heat from HDD & motherboard Large Acrylic window for clear viewing

Includes:: a fan controller knob controls fan/s up to 15W. Specifications Form Factor: Micro ATX Motherboard Support: Micro ATX, Mini ITX PSU Support: Standard ATX Gaming Case: Yes Water Cooling Ready: No Dimensions: 280mm x 380mm x 350mm (W x H x D) Packaging Dimensions: 345mm x 490mm x 475mm (W x H x D) Body
Material: 0.7mm SGCC Front Bezel
Material: Plastic Side Panel: Window External Bays: 1 x 5.25” External Internal Bays: 3 x 3.5” Internal 5 x 2.5” Internal Drive Bay Notes: Hidden, Internal 3.5" HDD Tray & Under ODD rack Expansion Slots: 4 x Full Size Cooling Front: 120mm fan x 2 or 140mm fan x 2 or 200mm fan x 1 (1 x 200mm LED fan Included) Cooling Top: 120mm fan x 2 or 140mm fan x 2 Cooling Rear: 120mm fan x 2 or 140mm fan x 2 (1 x 140mm Black fan Included) Cooling Side: None Cooling Bottom: None IO Ports: 2 x USB (Universal Serial Bus) 3.0 1 x HD Audio 1 x Microphone Front Bezel
Colour: Black Body
Colour: Black System Cabinet
Features:

Includes:: 1 x Fan Controllers PSU Included: No Net Weight (KGs): KGs









...