The High-Density Packet Voice digital signal processor (DSP) Module (PVDM2) enables Cisco Systems Integrated Services Routers to provide high-density voice connectivity, conferencing, & transcoding capabilities in Cisco IP Communications solutions. Cisco Integrated Services Routers provide enterprises & service providers with a toll bypass solution by connecting their existing telephony equipment (such as private branch exchanges [PBXs], Key systems, analog telephones, & fax machines) to a toll-free data network; & eventually migrate customers to Cisco AVVID (Architecture for Voice, Video & Integrated Data) IP telephony solutions. ...

Cisco Voice Interface Cards (VICs) support voice technologies. VICs can be installed in interface card slots on supported Cisco access routers or in 1- or 2-slot voice network modules that are installed in network module slots on supported Cisco access routers. ...

The Cisco voice interface cards (VICs) are daughter cards that install into the network modules & provide the interface to the PSTN & to telephony equipment (PBX, key systems, fax machines, phones). The VIC2-2BRI-NT/TE provides the ability to connect a PBX or PABX configured as user side directly to the router. It also provides phantom power to accommodate equipment that requires it. ...

Cisco pays special attention to its network accessories, which are the foundation stone of the whole network system. Cisco cables will never let you down & you can always count on their superior quality & outstanding reliability. Cisco has a wide range of network cables, assemblies, connectors, adapters & other accessories that will fit any demands of the customers. This Non-Locking Wall Mount Kit is intended for 7900 series phones. ...

The network modules provide various port densities to meet customer requirements at various price points. The WAN-interface-card (WIC) option offers a single ISDN BRI port (with optional NT1). The WIC-1B-S/T-V3 inserts into a mixed-media network module or is supported on the Cisco 1700 Series, Cisco 1800 Series, Cisco 2600XM Series, Cisco 2800 Series, Cisco 3700 Series & Cisco 3800 Series routers. The ability to add BRI connectivity via a WIC enables administrators to maximize valuable slot space while providing additional connectivity options on the same module such as Fast Ethernet. ...

The Cisco Catalyst 3650 Series is the next generation of enterprise-class standalone & stackable access-layer switches that provide the foundation for full convergence between wired & wireless on a single platform. The Cisco Catalyst 3650 is built on the advanced Cisco Stack Wise-160, & takes advantage of the new Cisco Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC). This switch can enable uniform wired-wireless policy enforcement, application visibility, flexibility, application optimization, & superior resiliency. The Cisco Catalyst 3650 Series Switches support full IEEE 802.3at Power over Ethernet Plus (Po E+), & offer modular & field-replaceable redundant fans & power supplies. They can help you increase wireless productivity & reduce your TCO. Product Overview Integrated wireless controller capability with: &9702; Up to 40G of wireless capacity per switch (48-port models) &9702; Support for up to 25 access points & 1000 wireless clients on each switching entity (switch or stack) 24 & 48 10/100/1000 data & Po E+ models with energy-efficient Ethernet (EEE) supported ports Three fixed-uplink models with 4 x Gigabit Ethernet, 2 x 10 Gigabit Ethernet, or 4 x 10 Gigabit Ethernet ports Optional Cisco Stack Wise-160 technology that provides scalability & resiliency with 160 Gbps of stack throughput: &9702; Dual redundant, modular power supplies & three modular fans providing redundancy &9702; Full IEEE 802.3at (Po E+) with 30 W power on all ports in 1 rack unit (RU) form factor Software support for IPv 4 & IPv 6 routing, multicast routing, modular quality of service (Qo S), Flexible Net Flow (FNF) Version 9, & enhanced security features Single universal Cisco IOS Software image across all license levels, providing an easy upgrade path for software features Enhanced limited lifetime warranty (E-LLW) with next business day (NBD) advance hardware replacement & 90-day access to Cisco Technical Assistance Center (TAC) support ...

The Cisco Catalyst 3750 v 2 Series Switches (Figure 1) are next-generation energy- efficient Layer 3 Fast Ethernet stackable switches. This new series of switches supports Cisco Energy Wise technology, which enables companies to measure & manage power consumption of network infrastructure & network-attached devices, thereby reducing their energy costs & their carbon footprints. The Cisco Catalyst 3750 v 2 Series consumes less power than its predecessors & is the ideal access layer for enterprise, retail, & branch-office environments, as it increases productivity & investment protection by enabling a unified network for data, voice, & video. Catalyst 3750 v 2 Series Highlights Lower power consumption than its predecessors Backward compatible with Cisco Catalyst 3750 & 3750-E Series Switches Energy Wise support to monitor energy consumption of network infrastructure & implement energy saving programs to reduce energy costs Open Shortest path First (OSPF) routing with IP Base feature set Compatible with Cisco Redundant Power System (RPS) 2300 Uniform depth of 11.9 inches on all units for better cable management IPv 6 routing included in the IP Services feature set ...

The Cisco Catalyst 3750-X & 3560-X Series Switches are an enterprise-class lines of stackable & standalone switches, respectively. These switches provide high availability, scalability, security, energy efficiency, & ease of operation with innovative features such as Cisco Stack Power (available only on the Catalyst 3750&8209;X), IEEE 802.3at Power over Ethernet Plus (Po E+) configurations, optional network modules, redundant power supplies, & Media Access Control Security (MACsec) features. The Cisco Catalyst 3750-X Series with Stack Wise Plus technology provides scalability, ease of management & investment protection for the evolving business needs. The Cisco Catalyst 3750-X & 3560-X enhance productivity by enabling applications such as IP telephony, wireless, & video for borderless network experience. Cisco Catalyst 3750-X & 3560-X Series primary

Features: 24 & 48 10/100/1000 Po E+, non-Po E models, & 12 & 24 GE SFP port models 24 & 48 10/100/1000 UPOE-capable models with Energy Efficient Ethernet (EEE) support Four optional uplink network modules with GE or 10GE ports Industry first Po E+ with 30W power on all ports in 1 rack unit (RU) form factor Dual redundant, modular power supplies & fans Media Access Control Security (MACsec) hardware-based encryption Flexible Net Flow & switch-to-switch hardware encryption with the Service Module uplink Open Shortest Path First (OSPF) for routed access in IP Base image IPv 4 & IPv 6 routing, Multicast routing, advanced quality of service (Qo S), & security features in hardware Enhanced limited lifetime warranty (LLW) with next business day (NBD) advance hardware replacement & 90 day access to Cisco Technical Assistance Center (TAC) support Enhanced Cisco Energy Wise for operational cost optimization by measuring actual power consumption of the Po E devices, reporting, & reducing energy consumption across the network USB (Universal Serial Bus) Type-A & Type-B ports for storage & console respectively & an out-of-band Ethernet management port In addition to the above features, the Cisco Catalyst 3750-X switches also offer: Cisco Stack Power™ technology: An innovative feature & industry first for sharing power among stack members Cisco Stack Wise Plus technology for ease of use & resiliency with 64 Gbps of throughput Investment protection with backward compatibility with all other models of Cisco Catalyst 3750 Series Switches Switch Configurations All switch models can be configured with four optional network modules. The UPOE, Po E+, & non-Po E switch models are available with either the LAN Base or IP Base feature set. IP Services feature set is available as an upgrade option at the time of ordering or through a license at a later time. The GE SFP switch models are available with either IP Base or IP Services feature set.

...

The Cisco Catalyst 3850 Series is the next generation of enterprise-class stackable Ethernet & Multigigabit Ethernet access & aggregation layer switches that provide full convergence between wired & wireless on a single platform. Cisco’s new Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch & enables uniform wired-wireless policy enforcement, application visibility, flexibility & application optimization. This convergence is built on the resilience of the new & enhanced Cisco Stack Wise-480 technology. The Cisco Catalyst 3850 Series Switches support full IEEE 802.3at Power over Ethernet Plus (Po E+), Cisco Universal Power over Ethernet (Cisco UPOE), modular & field-replaceable network modules, RJ45 & fiber-based downlink interfaces, & redundant fans & power supplies. With speeds that reach 10 Gbps, the Catalyst 3850 Multigigabit Ethernet Switches support current & next-generation wireless speeds & standards (including 802.11ac Wave 2) on existing cabling infrastructure. Product Overview Integrated wireless controller capability with: Up to 40G of wireless capacity per switch (48-port models) Support for up to 50 access points & 2000 wireless clients on each switching entity (switch or stack) 24 & 48 10/100/1000 data Po E+ & Cisco UPOE models with energy-efficient Ethernet (EEE) 24 & 48 100 Mbps/1/2.5/5/10 Gbps UPOE models with energy-efficient Ethernet (EEE)[1] 12- & 24-port SFP-based models Cisco Stack Wise-480 technology provides scalability & resiliency with 480 Gbps of stack throughput Cisco Stack Power™ technology provides power stacking among stack members for power redundancy Five optional uplink modules with 4 x Gigabit Ethernet, 2 x 10 Gigabit Ethernet, 4 x 10 Gigabit Ethernet, 8 x 10 Gigabit Ethernet 2 or 2 x 40 Gigabit QSFP[2] ports Dual redundant, modular power supplies & three modular fans providing redundancy Full IEEE 802.3at (Po E+) with 30W power on all copper ports in 1 rack unit (RU) form factor Cisco UPOE with 60W power per port in 1 rack unit (RU) form factor Software support for IPv 4 & IPv 6 routing, multicast routing, modular quality of Service (Qo S), Flexible Net Flow (FNF), & enhanced security features Single universal Cisco IOS Software image across all license levels, providing an easy upgrade path for software features Enhanced limited lifetime warranty (E-LLW) with next business day (NBD) advance hardware replacement & 90-day access to Cisco Technical Assistance Center (TAC) support ...

The industry-standard Cisco Gigabit Interface Converter (GBIC) is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. The Cisco 1000BASE-SX GBIC (WS-G5484) operates on ordinary multimode fiber (MMF) optic link spans up to 1815 feet (550 m) long. ...