The Cisco 2500 series wireless controller enables system wide wireless functions in small to medium-sized enterprises & branch offices. Designed for 802.11n performance, Cisco 2500 series wireless controller is an entry-level controller that provides real-time communication between Cisco Aironet access points to simplify the deployment & operation of wireless networks. As a component of the Cisco unified wireless network, this controller delivers centralized security policies, wireless intrusion prevention system (w IPS) capabilities, RF management & quality of service (Qo S) for voice & video. Delivering 802.11n performance & scalability the 2500 series provides low total cost of ownership & flexibility to scale as network requirements grow. ...

This module provides 48 ports of dedicated 10/100 Ethernet switching for Ethernet or Fast Ethernet client or server switching. All ports can utilize Fast Ether Channel technology for higher-speed uplinks or server connections. It can be used in conjunction with any of the other Catalyst 4000 modules, making the Catalyst 4000 a flexible & expandable switching option. ...

Cisco is the worldwide leader in networking for the Internet. Cisco provides the broadest line of solutions for transporting data, voice & video within buildings, across campuses, or around the world. Cisco solutions ensure that networks both public & private operate with maximum performance, security, & flexibility. ...

It is designed for 3G HWIC applications in the 800/850/900/1800/1900/2100 MHz frequency bands. The antenna has a nominal gain of +2 d Bi for 800/850/900 MHz bands & +4 d Bi for 1800/1900/2100 MHz bands. It is designed for installation on a mast or exterior wall. The antenna is compatible with Cisco cellular products utilizing a standard Threaded Neil Concelman connector (TNC) This antenna is compatible with any Cisco 3G cellular device that utilizes a TNC connector & requires a wall-mounted or mast-mounted outdoor antenna.

Includes:: • Mast or sall mount antenna • 3G-ACC-OUT-LA (lightning arrestor) Description • Multiband outdoor omnidirectional antenna • Mast & wall mount • 3G-ACC-OUT-LA lightning arrestor (see below) • Can be used with the following cable extensions: 3G-CAB-ULL-20, 3G-CAB-ULL-50, 3G-CAB-LMR240-25, 3G-CAB-LMR240-50, & 3G-CAB-LMR240-75 Electrical Specifications • Frequency range: 806 to 960 MHz & 1710 to 2170 MHz • Gain: +2 d Bi (806 to 960 MHz) & +4 d Bi (1710 to 2170 MHz) • Maximum RF power tolerated: 20W • Connector: TNC male • VSWR: < 2.5:1 (806 to 960 MHz) & < 2.5:1 (1710 to 2170 MHz) • Nominal impedance: 50 ohms • Polarization: Vertical • Radiation Pattern: (-3 d B beamwidth) • Horizontal: Omnidirectional • Vertical: 40 deg (806 to 960 MHz) & 40 deg (1710 to 2170 MHz) Mechanical Specifications • Radome

Material: Off-white pultruded fiberglass, UV-protected • Cap

Material: Off-white Makro Blend plastic • Radome dimensions: 1.25 in. OD x 16 in H (3.175 cm OD x 40.64 cm H ) • Radome weight: 0.375 lb (0.17 kg) • Mounting hardware • Bracket & clamps (for mast mounting) • Bracket (for wall mounting) • Screws not included (for wall mounting) Outdoor Antenna Lightning Arrestor 3G-ACC-OUT-LA Description • 3G lightning arrestor for outdoor antennas • Type: Inline quarter-wave arrestor with integrated high-pass filter • Bulkhead mounted & grounded with optional ground lug • Can be used with 3G-ANTM-OUT-COMBO outdoor omni antenna with lightning arrestor • Can be used with the following cable extensions: 3G-CAB-ULL-20, 3G-CAB-ULL-50, 3G-CAB-LMR240-25, 3G-CAB-LMR240-50, & 3G-CAB-LMR240-75 • Indoor (preferred) or outdoor (optional) installation • No maintenance required





...

The Cisco Unified Wireless IP Phone 7925 Multi-Charger can charge up to six phones & six batteries at the same time. ...

This flexible, multiservice solution supports multiple data, voice, & integrated data & voice applications, facilitating the migration from data only or channelized data & voice to packet voice solutions & simplifying deployment, management, & sparing. ...

The Cisco 1-port T1/E1 multiflex interface cards support generic single-port T1 or E1 trunk interfaces for voice, data, & integrated voice and/or data applications. These cards provide basic structured T1 service, as well as structured & unstructured E1 services. ...

The Second-generation 1- & 2-port G.703 Multiflex Trunk voice/WAN Interface Cards support not only unstructured E1 but also all the features of the other Cisco MFT VWIC2 cards, including drop & insert. Additional flexibility is provided on the 2 port G.703 Multiflex Trunk voice/WAN Interface Cards with the capability to configure one port for unstructured E1 while configuring the other for standard framed E1. ...

Cisco N2XX-AQPCI05= Fibre Channel Host Bus Adapter with 8.5 Gbps data transfer has a 2 x LC fibre channel. This adapter is part of the QLE2500 HBA product family that offers next generation 8 Gb FC technology, meeting the business requirements of the enterprise data center. Interfaces/ports: 2 x LC fibre channel, PCI express 2.0 x 8 Dimensions: 2 1/2" (H) x 6.6" (W) Compatability: PC, unix Connectivity technology: Wired Maximum data transfer rate: 8.5 GB/s Topology: Point-to-point, switched fabric Temperature: 32
- 131 deg F (operating); Humidity: 10
- 90% (operating) Form factor: Low profile plug in card Industry standards: FCC Part 15, Subpart B, Class A, VCCI V-3/2004.4, MIC, BSMI (CNS 13438), UL, c UL, UL60950, CSA C22.2 No.60950, Class 1 Laser Product per DHHS 21CFR J, TUV: EN60950-1:2001, EN60825-1:1994+A1+A2, EN60825-2:1994+A1 Protocols: FC-AL-2, FC-AL, FC-Tape, FCP-3-SCSI, FC-SP, FCP-2, FCP-3 / Topology: Point to point, Switched fabric / Fibre class supported: Class 2, class 3 Fibre type: Multimode Certificates & standards: WEEE, Energy Star, Ro Hs-6

...

Cisco AIR-AP-BRACKET-2=
- AP 1040/1140/1260/3500 Series Mounting Bracket, Universal Please note: networking components such as
...