The Cisco Catalyst 3750-X series switches are an enterprise-class line of stackable switches. These switches provide high availability, scalability, security, energy efficiency, & ease of operation with innovative features such as Cisco Stack Power, IEEE 802.3at Power over Ethernet Plus (Po E+) configurations, & Media Access Control Security (MACsec) features. The Cisco Catalyst 3750-X series with Stack Wise Plus technology provides scalability, ease of management & investment protection for the evolving business needs. The Cisco Catalyst 3750-X enhances productivity by enabling applications such as IP telephony, wireless, & video for borderless network experience. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Cisco Catalyst 3850 series is the enterprise-class stackable access-layer switches that provide full convergence between wired & wireless on a single platform. Cisco's Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch & enables uniform wired-wireless policy enforcement, application visibility, flexibility & application optimization. ...

The Cisco Catalyst 3850 series is the enterprise-class stackable access-layer switches that provide full convergence between wired & wireless on a single platform. Cisco's Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch & enables uniform wired-wireless policy enforcement, application visibility, flexibility & application optimization. The Cisco Catalyst 3850 series switches support full IEEE 802.3at Power over Ethernet Plus (Po E+), modular & field-replaceable network modules, redundant fans & power supplies. Features Converged wired plus wireless access The Cisco Catalyst 3850 is the stackable access switching platform that enables wired plus wireless services on a single Cisco IOS XE software-based platform. With this, Cisco has pioneered a host of rich capabilities such as high availability based on stateful switchover (SSO) on stacking, granular Qo S, security, and Flexible Netflow (FNF) across wired & wireless in a seamless fashion. Flexible Net Flow (FNF) Full visibility into the wired plus wireless traffic is achieved because of the access point Control & Provisioning of Wireless Access Points (CAPWAP) tunnel termination on the switch. This helps identify users & user traffic flows in order to identify potential attackers & take corrective action at the access layer before the attack penetrates further into the network. This is achieved using FNF, which monitors every single flow entering & exiting the switch stack for wired & wireless users. It also helps identify the top wired/wireless talkers & enforce appropriate bandwidth provisioning policies. Advanced wired plus wireless Qo S capabilities The 3850 switch has advanced wired plus wireless Qo S capabilities. It uses the Cisco modular Qo S command line interface (MQC). The switch manages wireless bandwidth using unprecedented hierarchical bandwidth management starting at the per-access-point level & drilling further down to per-radio, per-service set identification (SSID), and per-user levels. This helps manage & prioritize available bandwidth between various radios & various SSIDs (enterprise, guest, and so on) within each radio on a percentage basis. The switch is also capable of automatically allocating equal bandwidth among the connected users within a given SSID. Provides a rich set of security features The Cisco Catalyst 3850 provides a rich set of security features for wired plus wireless users. Features such as IEEE 802.1x, Dynamic Host Configuration Protocol (DHCP) snooping, IP Source Guard & control plane protection, wireless intrusion prevention systems (WIPSs), and so on enable protection against unauthorized users & attackers. With a variety of wired plus wireless users connecting to the network, the switch supports session-aware networking, in which each device connected to the network is identified as one session, and unique access control lists (ACLs) and/or Qo S policies can be defined & applied using the ISE for each of these sessions, providing better control on the devices connecting to the network. ...

The Cisco Catalyst 3850 series is the enterprise-class stackable access-layer switches that provide full convergence between wired & wireless on a single platform. Cisco's Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch & enables uniform wired-wireless policy enforcement, application visibility, flexibility & application optimization. The Cisco Catalyst 3850 series switches support full IEEE 802.3at Power over Ethernet Plus (Po E+), modular & field-replaceable network modules, redundant fans & power supplies. ...

The Cisco Catalyst 3850 series is the enterprise-class stackable access-layer switches that provide full convergence between wired & wireless on a single platform. Cisco's Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch & enables uniform wired-wireless policy enforcement, application visibility, flexibility & application optimization. Features Converged wired plus wireless access The Cisco Catalyst 3850 is the first stackable access switching platform that enables wired plus wireless services on a single Cisco IOS XE software-based platform. With this, Cisco has pioneered a host of rich capabilities such as high availability based on stateful switchover (SSO) on stacking, granular Qo S, security, and Flexible Netflow (FNF) across wired & wireless in a seamless fashion. Flexible Net Flow (FNF) Full visibility into the wired plus wireless traffic is achieved because of the access point Control & Provisioning of Wireless Access Points (CAPWAP) tunnel termination on the switch. This helps identify users & user traffic flows in order to identify potential attackers & take corrective action at the access layer before the attack penetrates further into the network. This is achieved using FNF, which monitors every single flow entering & exiting the switch stack for wired & wireless users. It also helps identify the top wired/wireless talkers & enforce appropriate bandwidth provisioning policies. Advanced wired plus wireless Qo S capabilities The 3850 switch has advanced wired plus wireless Qo S capabilities. It uses the Cisco modular Qo S command line interface (MQC). The switch manages wireless bandwidth using unprecedented hierarchical bandwidth management starting at the per-access-point level & drilling further down to per-radio, per-service set identification (SSID), and per-user levels. This helps manage & prioritize available bandwidth between various radios & various SSIDs (enterprise, guest, and so on) within each radio on a percentage basis. The switch is also capable of automatically allocating equal bandwidth among the connected users within a given SSID. Provides a rich set of security features The Cisco Catalyst 3850 provides a rich set of security features for wired plus wireless users. Features such as IEEE 802.1x, Dynamic Host Configuration Protocol (DHCP) snooping, IP Source Guard & control plane protection, wireless intrusion prevention systems (WIPSs), and so on enable protection against unauthorized users & attackers. With a variety of wired plus wireless users connecting to the network, the switch supports session-aware networking, in which each device connected to the network is identified as one session, and unique access control lists (ACLs) and/or Qo S policies can be defined & applied using the ISE for each of these sessions, providing better control on the devices connecting to the network. ...

The Cisco Catalyst 3850 series is the enterprise-class stackable access-layer switches that provide full convergence between wired & wireless on a single platform. Cisco's Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch & enables uniform wired-wireless policy enforcement, application visibility, flexibility & application optimization. Features Converged wired plus wireless access The Cisco Catalyst 3850 is the first stackable access switching platform that enables wired plus wireless services on a single Cisco IOS XE software-based platform. With this, Cisco has pioneered a host of rich capabilities such as high availability based on stateful switchover (SSO) on stacking, granular Qo S, security, and Flexible Netflow (FNF) across wired & wireless in a seamless fashion. Flexible Net Flow (FNF) Full visibility into the wired plus wireless traffic is achieved because of the access point Control & Provisioning of Wireless Access Points (CAPWAP) tunnel termination on the switch. This helps identify users & user traffic flows in order to identify potential attackers & take corrective action at the access layer before the attack penetrates further into the network. This is achieved using FNF, which monitors every single flow entering & exiting the switch stack for wired & wireless users. It also helps identify the top wired/wireless talkers & enforce appropriate bandwidth provisioning policies. Advanced wired plus wireless Qo S capabilities The 3850 switch has advanced wired plus wireless Qo S capabilities. It uses the Cisco modular Qo S command line interface (MQC). The switch manages wireless bandwidth using unprecedented hierarchical bandwidth management starting at the per-access-point level & drilling further down to per-radio, per-service set identification (SSID), and per-user levels. This helps manage & prioritize available bandwidth between various radios & various SSIDs (enterprise, guest, and so on) within each radio on a percentage basis. The switch is also capable of automatically allocating equal bandwidth among the connected users within a given SSID. Provides a rich set of security features The Cisco Catalyst 3850 provides a rich set of security features for wired plus wireless users. Features such as IEEE 802.1x, Dynamic Host Configuration Protocol (DHCP) snooping, IP Source Guard & control plane protection, wireless intrusion prevention systems (WIPSs), and so on enable protection against unauthorized users & attackers. With a variety of wired plus wireless users connecting to the network, the switch supports session-aware networking, in which each device connected to the network is identified as one session, and unique access control lists (ACLs) and/or Qo S policies can be defined & applied using the ISE for each of these sessions, providing better control on the devices connecting to the network. ...

The Cisco Catalyst 3850 series is the next generation of enterprise-class stackable access-layer switch that provides full convergence between wired & wireless on a single platform. Cisco's Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch & enables uniform wired-wireless policy enforcement, application visibility, flexibility & application optimization. The Cisco Catalyst 3850 series switch supports full IEEE 802.3at Power over Ethernet Plus (Po E+), modular & field-replaceable network modules, redundant fans & power supplies. Features Converged wired plus wireless access The Cisco Catalyst 3850 is the first stackable access switching platform that enables wired plus wireless services on a single Cisco IOS XE Software-based platform. With this, Cisco has pioneered a host of rich capabilities such as high availability based on stateful switchover (SSO) on stacking, granular Qo S, security, and Flexible Netflow (FNF) across wired & wireless in a seamless fashion. The single console port for comm&-line interface (CLI) management reduces the number of touch points to manage for wired plus wireless services, thereby reducing network complexity, simplifying network operations, and lowering the TCO to manage the infrastructure. Cisco Stack Wise-480 technology Cisco Stack Wise-480 technology is built on the highly successful industry-leading Stack Wise technology, which is a premium stacking architecture. Stack Wise-480 has a stack bandwidth of 480 Gbps. The stack behaves as a single switching unit that is managed by an "active" switch elected by the member switches. The active switch automatically elects a standby switch within the stack. The active switch creates & updates all the switching/routing/wireless information & constantly synchronizes that information with the standby switch. Stack Wise-480 creates a highly resilient single unified system of up to four switches, providing simplified management using a single IP address, single Telnet session, single CLI, auto-version checking, auto-upgrading, auto-configuration, and more. Stack Wise-480 also enables local switching in Cisco Catalyst 3850 series switches. Cisco Stack Power technology The Cisco Catalyst 3850 series uses the Cisco Stack Power technology present on the Cisco Catalyst 3850 series. Stack Power is a power interconnect system that allows the power supplies in a stack to be shared as a common resource among all the switches. Cisco Stack Power unifies the individual power supplies installed in the switches & creates a pool of power, directing that power where it is needed. Efficient switch operation Cisco Catalyst 3850 series switches, designed & engineered by Cisco, provide optimum power-saving, EEE, low-power operations for industry best-in-class power management & power consumption capabilities. The Cisco Catalyst 3850 ports are capable of reduced power modes so that ports not in use can move into a lower power utilization state. Network management tools The Cisco Catalyst 3850 series switch offers both a superior CLI for detailed configuration & Cisco Prime infrastructure for unified wired plus wireless management. Prime infrastructure provides day 0 & ongoing provisioning, ongoing monitoring & maintenance, configuration templates, and device & user 360-degree views & serves as the FNF collector for user traffic views using the prime assurance manager module. Superior Qo S The Cisco Catalyst 3850 series offers Gigabit Ethernet speed with intelligent services that keep traffic flowing smoothly, even at 10 times the normal network speed. Industry-leading mechanisms for cross-stack marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed. ...

The Cisco Catalyst 3850 series is the enterprise-class stackable access-layer switches that provide full convergence between wired & wireless on a single platform. Cisco's Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch & enables uniform wired-wireless policy enforcement, application visibility, flexibility & application optimization. The Cisco Catalyst 3850 series switches support full IEEE 802.3at Power over Ethernet Plus (Po E+), modular & field-replaceable network modules, redundant fans & power supplies. ...

The Cisco Catalyst 3850 series is the enterprise-class stackable access-layer switches that provide full convergence between wired & wireless on a single platform. Cisco's Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch & enables uniform wired-wireless policy enforcement, application visibility, flexibility & application optimization. Features Converged wired plus wireless access The Cisco Catalyst 3850 is the first stackable access switching platform that enables wired plus wireless services on a single Cisco IOS XE software-based platform. With this, Cisco has pioneered a host of rich capabilities such as high availability based on stateful switchover (SSO) on stacking, granular Qo S, security, and Flexible Netflow (FNF) across wired & wireless in a seamless fashion. Flexible Net Flow (FNF) Full visibility into the wired plus wireless traffic is achieved because of the access point Control & Provisioning of Wireless Access Points (CAPWAP) tunnel termination on the switch. This helps identify users & user traffic flows in order to identify potential attackers & take corrective action at the access layer before the attack penetrates further into the network. This is achieved using FNF, which monitors every single flow entering & exiting the switch stack for wired & wireless users. It also helps identify the top wired/wireless talkers & enforce appropriate bandwidth provisioning policies. Advanced wired plus wireless Qo S capabilities The 3850 switch has advanced wired plus wireless Qo S capabilities. It uses the Cisco modular Qo S command line interface (MQC). The switch manages wireless bandwidth using unprecedented hierarchical bandwidth management starting at the per-access-point level & drilling further down to per-radio, per-service set identification (SSID), and per-user levels. This helps manage & prioritize available bandwidth between various radios & various SSIDs (enterprise, guest, and so on) within each radio on a percentage basis. The switch is also capable of automatically allocating equal bandwidth among the connected users within a given SSID. Provides a rich set of security features The Cisco Catalyst 3850 provides a rich set of security features for wired plus wireless users. Features such as IEEE 802.1x, Dynamic Host Configuration Protocol (DHCP) snooping, IP Source Guard & control plane protection, wireless intrusion prevention systems (WIPSs), and so on enable protection against unauthorized users & attackers. With a variety of wired plus wireless users connecting to the network, the switch supports session-aware networking, in which each device connected to the network is identified as one session, and unique access control lists (ACLs) and/or Qo S policies can be defined & applied using the ISE for each of these sessions, providing better control on the devices connecting to the network. ...

• 24 & 48 10/100/1000 Po E+ & non-Po E models • Optional four Gigabit Ethernet (Gb E) SFP or two 10 Gb E SFP+ uplink network modules • Industry first Po E+ with 30W power on all ports in 1 rack unit (RU) form factor • Dual redundant, modular power supplies & fans • Media Access Control Security (MACsec) hardware-based encryption • IPv 4 & IPv 6 routing, Multicast routing, advanced quality of service (Qo S), & security features in hardware • Enhanced limited lifetime warranty (LLW) with next business day (NBD) advance hardware replacement & 90 day access to Cisco Technical Assistance Center (TAC) support • Enhanced Cisco Energy Wise for operational cost optimization by measuring actual power consumption of the Po E devices, reporting, & reducing energy consumption across the network • USB (Universal Serial Bus) Type-A & Type-B ports for storage & console respectively & an out-of-band Ethernet management port. ...