This Booted Shielded Cat 6a patch cable is ideal to be used with 10 G Base-T ports & equipment, such as network adapters, hubs, switches, routers, DSL/cable modems & patch panels, & will protect a high speed 10 Gigabit network connection from noise & electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications & drastically reduces both impedance & structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat 6a component requirements. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable & plugs, this design minimises Near-End Crosstalk (NEXT) levels. The moulded, snagless boot prevents unwanted cable snags during installation & provides extra strain relief. Available in a variety of colours to easily color-coded a network installation. Each cable is individually labelled with the length for ease of use. ISO/IEC 11801: S/FTP (Shielded/ Foiled Twisted Pair); Overall braided Shielding, over four Foil-shielded Twisted Pairs. Connector 1: (1) RJ-45 Male Connector 2: (1) RJ-45 Male ...

This Booted Shielded Cat 6a patch cable is ideal to be used with 10 G Base-T ports & equipment, such as network adapters, hubs, switches, routers, DSL/cable modems & patch panels, & will protect a high speed 10 Gigabit network connection from noise & electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications & drastically reduces both impedance & structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat 6a component requirements. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable & plugs, this design minimises Near-End Crosstalk (NEXT) levels. The moulded, snagless boot prevents unwanted cable snags during installation & provides extra strain relief. Available in a variety of colours to easily color-coded a network installation. Each cable is individually labelled with the length for ease of use. ISO/IEC 11801: S/FTP (Shielded/ Foiled Twisted Pair); Overall braided Shielding, over four Foil-shielded Twisted Pairs. Connector 1: (1) RJ-45 Male Connector 2: (1) RJ-45 Male ...

Experience the next generation of networking with Cat 6a patch cables from C2G. These network cables enable 10 gigabit data transmission over a 4 twisted pair copper cable, allowing connection distances up to 100 meters. Current Cat 6 cabling systems may only support 10 gigabit ethernet over limited distances. The Cat 6a draft extends the Cat 6 electrical specifications from 250 MHz to 500 MHz. It also proposes a new measurement for Power-Sum Alien Crosstalk to 500 MHz. Alien Crosstalk is a coupled signal in a disturbed pair arising from a signal in a neighboring cable. Low-profile, snagless hood is ideal for high-density switch applications. Connector 1: (1) RJ-45 Male Connector 2: (1) RJ-45 Male
Colour: Grey Warranty: Lifetime Weight:0.131kg Length:3.00 Meter
...

This Booted Shielded Cat 6a patch cable is ideal to be used with 10 G Base-T ports & equipment, such as network adapters, hubs, switches, routers, DSL/cable modems & patch panels, & will protect a high speed 10 Gigabit network connection from noise & electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications & drastically reduces both impedance & structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat 6a component requirements. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable & plugs, this design minimises Near-End Crosstalk (NEXT) levels. The moulded, snagless boot prevents unwanted cable snags during installation & provides extra strain relief. Available in a variety of colours to easily color-coded a network installation. Each cable is individually labelled with the length for ease of use. ISO/IEC 11801: S/FTP (Shielded/ Foiled Twisted Pair); Overall braided Shielding, over four Foil-shielded Twisted Pairs. Connector 1: (1) RJ-45 Male Connector 2: (1) RJ-45 Male ...

Overview Experience the next generation of networking with Cat 6a patch cables from C2G. These network cables enable 10 gigabit data transmission over a 4 twisted pair copper cable, allowing connection distances up to 100 meters. Current Cat 6 cabling systems may only support 10 gigabit ethernet over limited distances. The Cat 6a draft extends the Cat 6 electrical specifications from 250 MHz to 500 MHz. It also proposes a new measurement for Power-Sum Alien Crosstalk to 500 MHz. Alien Crosstalk is a coupled signal in a disturbed pair arising from a signal in a neighboring cable. Low-profile, snagless hood is ideal for high density switch applications. Connector 1: (1) RJ-45 Male Connector 2: (1) RJ-45 Male
Colour: Blue UPC: 757120899129 Warranty: Lifetime Vendor: C2G Weight: 0.208kg Length: 5.00 Meter • Supports IEEE 802.3af & is DTE power compliant • Compatible with T568A & T568B wiring • Provides NEXT performance beyond 600 MHz • Po E rated to four times the standard
...

This Booted Shielded Cat 6a patch cable is ideal to be used with 10 G Base-T ports & equipment, such as network adapters, hubs, switches, routers, DSL/cable modems & patch panels, & will protect a high speed 10 Gigabit network connection from noise & electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications & drastically reduces both impedance & structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat 6a component requirements. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable & plugs, this design minimises Near-End Crosstalk (NEXT) levels. The moulded, snagless boot prevents unwanted cable snags during installation & provides extra strain relief. Available in a variety of colours to easily color-coded a network installation. Each cable is individually labelled with the length for ease of use. ISO/IEC 11801: S/FTP (Shielded/ Foiled Twisted Pair); Overall braided Shielding, over four Foil-shielded Twisted Pairs. Connector 1: (1) RJ-45 Male Connector 2: (1) RJ-45 Male ...

Product Features • Directly connect a Display Port output to a Display Port input • Carries a digital audio/video signal • Supports a Reduced Bit Rate (RBR) bandwidth & up to a 1920x 1080 resolution • Built to Display Port 1.2 standards Product Description This cable is an ideal solution for connecting the Display Port output of a laptop to a computer monitor which accepts a Display Port input. This cable carries a digital audio/video signal & the connectors feature latches which secure the cable in the port. Support of a Reduced Bit Rate (RBR) bandwidth means that this cable can carry up to a 1920x 1080 resolution. Built to Display Port 1.2 standards, this cable meets the requirements of high performance applications. ...

Overview The 15cm 4-pin 3.5mm Male to Dual 3.5mm Female Adapter is the perfect solution for connecting a set of headphones & a microphone to a single 4-pin 3.5mm port on a laptop, tablet, mobile phone or other mobile device. Newer laptops, mobile phones & other mobile devices only offer a single 4-pin 3.5mm audio port capable of supporting both an audio input & an audio output. This adapter provides two separate 3.5mm ports that will support a mono microphone & a set of stereo headphones or a set of external speakers. The compact design of this adapter makes it easy to carry in a laptop bag or briefcase. Note: The 3.5mm port on the device must be a 4-pin 3.5mm port capable of supporting a mono audio input & a stereo audio output. •
Colour: Black • UPC: 757120801146 • Warranty: Lifetime
...

C2G 0.3m Cat 6 Booted Unshielded (UTP) Network Patch Cable
- Black For fast Ethernet & Gigabit computer networks that require bandwidth-intensive
...

The Cables To Go " Value Series" 3.5mm stereo 90° right angle audio cable is specifically designed to provide a brilliant audio experience. It connects a PC sound card, portable CD player or any mini-stereo audio device with 3.5mm jacks to a multimedia speaker. This cable features two copper conductors & a drain wire. The conductors & drain wire are wrapped with an aluminum Mylar shield which prevents unwanted EMI/RFI interference. Fully molded nickel-plated connectors provide excellent strain relief for durable use. The 90° right angle connectors give this cable a low profile when plugged into a 3.5mm jack. ...