The CS1732B is 2-port KVM switch combined with a 2-port USB (Universal Serial Bus) 2.0 hub. As a KVM switch, it allows users to access two computers from a single keyboard, monitor, & mouse console. There are three methods to obtain instant access to any computer in your installation: manual, hotkey, & OSD. ...

The Master View CS62 KVM Switch is a simple control unit that allows access to two computer systems from a single console. The CS62 improves on previous models with a 50% smaller desktop footprint & convenient, built-in, custom KVM cables for hassle-free access. The self-powered CS62 provides mouse & keyboard emulation, convenient Hot Key combinations to access the connected computers. Setup is fast & easy; plugging cables into their appropriate ports is all that is entailed. Please note: networking components such as switches, routers, KVM & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

CS82A is a KVM switch with built-in PS/2 on each of the front & rear panels. It can control 2 servers via a single console & allows users to switch between computers via the buttons on the front panel of the switch or the hotkey configuration on the keyboard. It is the simplest & most convenient solution for multi-computer management. The sturdy, durable & small enclosure design is its important feature. ...

CS62A 2-Port KVM Switch has a handy design integrating with 4 feet of cables. It can control 2 servers via a single console. Please note: networking components such as switches, routers, KVM & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The US221A is a 2-port USB (Universal Serial Bus) 2.0 Peripheral Switch that allows up to 2 computers to share the use of a single USB (Universal Serial Bus) peripheral device (such as a printer, scanner, mass storage drive, etc.) on a one-at-a-time basis. The peripheral focus can be given to a computer manually by using pushbuttons on the switch, using the software-based configuration utility, or by the Auto Switch function. With multifunction printer support, the US221A is the ideal way to share the USB (Universal Serial Bus) 2.0 peripherals in a multimedia office environment. ...

Control two PC's or Servers with one USB (Universal Serial Bus), Keyboard, Monitor & Mouse using the Hawking CS102U KVM Switch. This kit

Includes:: everything you need to connect two PCs or Servers, one Keyboard, one Monitor & one Mouse together to the CS102U Switch. Installation is effortless. There is no software to configure, no repetitive installation routines & compatibility issues are non-existent. It works with most hardware platforms & with most operating systems. The CS102U saves space & money by reducing the number of peripherals & accessories needed in your work environment. It also eliminates the inconvenience of having to move between 2 computers. The CS102U is the perfect solution for Small Office & Home Office environments needing cost effective ways to control multiple PCs.

...

The Video Separator is a signal booster & splitter that is used to take video input from a single source & direct it to two video outputs for monitors using analog signals. The signal boost obtained by using the VS-102 means that you can not only split the signal but to extend the distance so that you can send the signal to about 210 feet. This makes public broadcasts from a single computer very feasible. If you want to display the same information on many monitors at once, such as in a classroom environment, or at a demonstration, this product performs incredibly well. Bandwidth is the term that is used to describe the signal capacity of these units. In general, bandwidth is directly proportional to the amount of data transmitted per unit of time. Specifically, in analog signals, bandwidth is the difference between the highest-frequency & the lowest frequency components of a giving signal. For example a voice telephone signal has a bandwidth of 3000 Hz (or 3000 cycles per second), where an analog TV signal has a bandwidth of Approx. 6 M Hz (or 6 million cycles per second) which is Approx. 2000 times greater than a simple voice phone call. These units have a bandwidth of 250 M Hz (which is 250 million cycles per second) & that is almost 42 times greater than a simple TV signal. This huge bandwidth allows for the transmission of large amounts of information at a very high rate of speed, & thus you can use the very high resolution setting of 1600x 1200 in 24 or 32-bit true color mode at a refresh rate of 70 Hz. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The VS201 Video Auto Switch is an automatic video switch that is ideal for monitors using analog signals. In addition, the VS201 boosts signals, allowing long distance transmission of up to 65 m (210 feet). A slide switch sets the priority for the incoming video signals for display on the monitor, & the VS201 automatically selects the proper input signal for its output port. Both features make the VS201 an excellent choice for educational environments. ...

The VS92A is a video splitter that not only duplicates the video signal from any VGA, XGA, SVGA, UXGA, or multisync monitor to two outputs, but also boosts the video signal over a distance of up to 65 meters. Cascadable to support up to 8 displays, & offering bandwidth up to 350 MHz, the VS92A is ideal for broadcasting & enhancing video information to the public, monitoring your work environments from safe locations, or offering superior video for company or classroom training. One video input to 2 video outputs Cascadable to 3 levels
- provides up to 8 video signals Supports 350 MHz bandwidth Long-distance transmission
- up to 65 m Superior video quality
- 1920 x 1440@60 Hz DDC, DDC2, DDC2B Compatible (Port 1 only) Supports VGA, XGA, SVGA, UXGA, WUXGA & multisync monitors All metal casing Please note: networking components such as switches, routers, KVM & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.


...

The CS1642 USB (Universal Serial Bus) 2.0 DVI dual view KVMP switch charts a revolutionary new direction in KVM (Keyboard, Video, Mouse) switch functionality by combining a 2-port KVM switch with a 2-port USB (Universal Serial Bus) 2.0 hub at the same time as providing dual-screen support for two DVI displays, making it ideal for graphic designers, banking & finance consultants, medical applications, & gamers. The CS1642 also supports 2.1-channel surround sound to give a theater digital audio experience that enlivens video playback. As a KVM switch, it allows users to access two computers with dual-screen support from a single USB (Universal Serial Bus) keyboard, USB (Universal Serial Bus) mouse, & dual-screen console. As a USB (Universal Serial Bus) hub, it permits each computer to access any peripherals connected to the hub on a "one computer at a time" basis. Please note: networking components such as switches, routers, KVM & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...