Introducing Arctic Silver 5 With its unique high-density filling of micronized silver & enhanced thermally conductive ceramic particles, Arctic Silver 5 provides a new level of performance & stability. Arctic Silver 5 is optimized for use between modern high-power CPUs & high performance heatsinks or water-cooling solutions. Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the tube, Arctic Silver 5's consistency is engineered for easy application. During the CPU's initial use, the compound thins out to enhance the filling of the microscopic valleys & ensure the best physical contact between the heatsink & the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Arctic Silver 5 goes through are much more subtle & ultimately much more effective.) Important Reminder: Due to the unique shape & sizes of the particles in Arctic Silver 5's conductive matrix, it will take a up to 200 hours & several thermal cycles to achieve maximum particle to particle thermal conduction & for the heatsink to CPU interface to reach maximum conductivity. (This period will be longer in a system without a fan on the heatsink or with a low speed fan on the heatsink.) On systems measuring actual internal core temperatures via the CPU's internal diode, the measured temperature will often drop 2C to 5C over this "break-in" period. This break-in will occur during the normal use of the computer as long as the computer is turned off from time to time & the interface is allowed to cool to room temperature. Once the break-in is complete, the computer can be left on if desired. ...

Unique Two-Step Process Arcti Clean Bottle 1 Thermal Material Remover quickly emulsifies & dissolves the existing thermal grease or pad from the CPU and/or heatsink so that it can easily be removed with a clean cloth or paper towel. Then, a few drops of Arcti Clean Bottle 2 Thermal Surface Purifier & some gentle wiping removes the remaining residue & inhibits corrosion on the copper or aluminium surface. Arcti Clean Bottle 1: Thermal Material Remover Arcti Clean 1 uses a proprietary combination of non-toxic biodegradable solvents to emulsify thermal greases or thermal pads. The citrus & soy-based solvents in Arcti Clean 1 match or exceed many hazardous & volatile solvents such as fluorinated & chlorinated organic solvents, acetone, MEK (methyl ethyl ketone), mineral spirits, isopropyl alcohol, & toluene. Arcti Clean Bottle 2: Thermal Surface Purifier The cationic surfactants in Arcti Clean 2 remove any residue left by the Arcti Clean 1, leaving a pristine surface for the application of a new thermal interface material. It also incorporates advanced flash corrosion inhibitors that minimise the corrosion layer on copper & aluminium allowing for more intimate contact between the thermal interface material & the heatsink. ...

The high-density, ceramic-based thermal compound specifically designed for modern high-power CPUs & high-performance heatsinks or water-cooling solutions.

Features: Tri-Linear Ceramic Content: Like the original Ceramique, Ceramique 2 uses only ceramic fillers so it is neither electrically conductive nor capacitive. The tri-linear composite of aluminum oxide, zinc oxide & boron nitride allows the thinnest possible bond line with modern processors, heatsinks & electronics. Critically-sized particles & new ultra-high shear mixing techniques maximize Ceramique 2's thermal performance & help maintain a stable homogenous suspension. This exclusive combination provides performance exceeding most metal based compounds. Polysynthetic Suspension Fluid: A new oil mixture, enhanced thermal filler properties & increased particle deagglomeration, dispersal & density enhance Ceramique 2's thermal performance & overall stability. The third generation polysynthetic suspension fluid combines advanced synthetic oils to maximize wetting & stability while allowing a higher density of thermally conductive fillers.

...

High-Density ceramic content: Ceramique uses a high-density layered composite of five unique shapes of thermally conductive aluminium oxide, boron nitride & zinc oxide sub-micron particles to maximize particle-to-particle contact area & thermal transfer. This exclusive combination provides performance exceeding most metal based compounds. Controlled Triple-Phase Viscosity: Ceramique does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that provide superior performance & long-term stability. During the system’s initial use, the heat from the CPU lowers the viscosity of the compound to enhance the filling of the microscopic valleys & ensure a minimum bond line between the heatsink & the CPU core. Then the compound thickens slightly over the next 100 to 300 hours of use to its final consistency designed for long-term stability. PLEASE NOTE: This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Ceramique goes through are much more subtle & ultimately much more effective. Excellent Stability: Ceramique is engineered to not separate, run, migrate, or bleed. Electrical Insulator: Ceramique does not contain any metal or other electrically conductive materials. It is a pure electrical insulator, neither electrically conductive nor capacitive. Performance: 2 to 10 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode embedded in the CPU core. Easy Clean Up: Ceramique can easily be cleaned from CPUs & heatsinks with isopropyl alcohol or any of the cleaners listed in the product instructions. Innovative Dispenser: The 2.5-gram Ceramique is the first product available in our proprietary thermal compound syringe. Our new syringe is more compact, easier to handle & dispenses a higher percentage of its content than standard industrial or medical syringes. The amount of compound remaining in the syringe is easy to determine as the rear of the plunger is perfectly flush with the flange when the syringe is empty. ...

Areocool Battle Hawk White USB (Universal Serial Bus) 3 120mm Fan With Blue Led Midi Tower Case In need of a new gaming case but not enough budget to add a fan controller & a card reader? Well, look no further. Battle Hawk not only look cool as a gaming case, it also comes with 2 sets of fan controllers & a built-in card reader reads & writes most SD cards. You can also install up to three 3.5" HDD & two 2.5" SSD/HDD & accommodate long cards up to 390mm. Key Features All black chassis interior (0.5mm thickness) Support long graphic cards up to 390mm Supports up to 2x 12cm fans on front panel

Includes:: 1 x 120mm LED fan at front & 1x 120mm fan at case rear 2 channel fan RPM switch function, support up to 4 fans. (High-Off-Low) USB2.0 interface SD/ micro SD card reader included Pre-drilled CPU holes for easy mounting & removable of CPU cooler PSU dust filter can be easily removed for cleaning Large Acrylic window for clear viewing Specifications Form Factor: Midi Tower Motherboard Support: ATX, Micro ATX, Mini ITX PSU Support: Standard ATX Gaming Case: No Water Cooling Ready: No Dimensions: 218mm x 491mm x 455mm (W x H x D) Packaging Dimensions: 247mm x 510mm x 547mm (W x H x D) Body

Material: 0.5mm SECC Metal Front Bezel

Material: Plastic Side Panel: Window External Bays: 1 x 5.25 External 1 x 3.5 External Internal Bays: 3 x 3.5 Internal 2 x 2.5 Internal Drive Bay Notes: Expansion Slots: 7 x Full Size Cooling Front: 1 x 12cm Blue LED Fans Cooling Top: Space for 2 x 12cm Fan (Not Included) Cooling Rear: 1 x 12cm Fan Cooling Side: None Cooling Bottom: None IO Ports: 1 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 1 x HD Audio 1 x Microphone Front Bezel

Colour: white Body

Colour: white/ Black System Cabinet

Features:

Includes:: 2 x Fan Controllers Card Reader Supports SD/MMC, TF, PSU Included: No Net Weight (KGs): 4.5 KGs













...

You will need Arkham Horror core game to play this expansion. The Black Goat of the Woods is an expansion for the Arkham Horror board game by Fantasy Flight Games. This expansion features 88 new Ancient One cards, 9 new monster markers, 1 Herald Sheet, & 90 new Investigator cards including new items, new spells, & the dangerous lure of corruption. ...

You will need Arkham Horror core game to play this expansion. Curse of the Dark Pharaoh is the first expansion for Arkham Horror! Focusing on the thematic game play, amazing art, & strange tales that made the original game such a fan-favorite, this expansion

Includes:: 166 new cards!.

...

Army Figure Case
- Black
- 65-15
- Citadel
- Games Workshop. The Citadel Army Figure Case has been specifically designed



...

Army Painter
- Battlefield Rocks
- Battlefields Basing. Age 14. The perfect addition to any base. Use a few Battlefield Rocks

...

Army Painter
- Black Battleground
- Battlefields Basing. Age 14. With the Black Battleground basing you can very quickly get

...