APC Smart-UPS On-Line, 4200 Watts/6000 VA, Input 230V/ Output 230V, Interface Port DB-9 RS-232, RJ-45 10/100 Base-T, 3U Availability Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS overload condition or fault. Scalable runtime Allows additional run time to be quickly added as needed. Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature Manageability Network manageable Provides remote power management of the UPS over the network Infra Stru Xure Manager Compatible Enables centralized management via the APC Infra Stru Xure Manager. Smart Slot Customize UPS capabilities with management cards. LED status indicators Quickly understand unit & power status with visual indicators. Serial Connectivity Provides management of the UPS via a serial port. Adaptability Plug-&-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Rack/ Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP Serviceability User-replaceable batteries Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR) Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced Predictive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Disconnected battery notification Warns when a battery is not available to provide backup power. Audible alarms Provides notification of changing utility power & UPS power conditions Protection Frequency & voltage regulation Gives higher application availability by correcting poor frequency & voltage conditions without using the battery Power conditioning Protects connected loads from surges, spikes, lightning, & other power disturbances Input power factor correction Minimizes installation costs by enabling the use of smaller generators & cabling. Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Cold-start capable Provides temporary battery power when the utility power is out. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment.
Includes::CD with software, Smart UPS signalling RS-232 cable, User Manual, Web/SNMP Management Card Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.
...

APC Smart-UPS RT is a family of high-density, performance UPSs for voice & data networks, medical labs, & light industrial applications. 6U form factor allows standardization across multiple applications. High power internal chargers allow virtually unlimited additional matching battery packs to comply with aggressive runtime demands of business-critical systems. Customers with harsh power environments looking for extremely tight voltage & frequency regulation, internal bypass, & input power factor correction typical of double conversion online topology will get them in the Smart-UPS RT. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Switched Rack PDUs provide load metering combined with controlled on/off switching by individual outlets for remote power recycling, delayed power sequencing of equipment & outlet use management.APC Switched Rack Power Distribution Units (PDUs) place rack equipment power control in the hands of the IT Manager. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment & to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery & extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, & control Switched rack PDUs through secure Web, SNMP, or Telnet interfaces. ...

Switched Rack PDUs provide load metering combined with controlled on/off switching by individual outlets for remote power recycling, delayed power sequencing of equipment & outlet use management.APC Switched Rack Power Distribution Units (PDUs) place rack equipment power control in the hands of the IT Manager. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment & to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery & extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, & control Switched rack PDUs through secure Web, SNMP, or Telnet interfaces. ...

APC's Switched Rack Power Distribution Units (PDUs) are premium solutions to many of the power management problems seen in today's IT environments. Some of the problems are unauthorized use of power outlets, locked-up equipment, in-rush current, overloaded circuits, & the need of remote access to power outlets in the rack. The Switched Rack PDUs address these problems through individual outlet control, power on & off delays, current monitoring, alarm thresholds, & network management. Individual outlet control allows users to turn outlets on, turn outlets off, or recycle power to equipment, which can reboot locked-up equipment & avoid unauthorized use of outlets. Power delays allow users to determine the order in which equipment is powered up or down. Utilizing the power delay feature will avoid in-rush current, which can cause overloads. Monitoring the current draw at the rack level is key to avoiding downtime due to overloaded circuits. The Switched Rack PDUs provide an aggregate current draw, which can be viewed remotely or locally, via digital display. In addition, alarms will be generated based on user-defined thresholds to alert users of potential circuit overloads (on select models). Users can access, configure, & control the Switched Rack PDUs through Web, SNMP, or Telnet Interfaces. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

APC provides power protection, environmental control & site monitoring services that are designed to proactively identify & correct problems before downtime occurs. Over the years, APC has received more than 150 awards worldwide for reliability & innovation of solutions
- more than any other UPS manufacturer. APC's solutions are accepted as "best of breed" across the globe. You deserve the legendary reliability & peace of mind that only APC can provide.
...

Advances in Large Corporation computing & storage technologies demand a change in Large Corporation power protection technology. Symmetra is a single unit composed of modular components. This modular architecture provides the foundation of building & scaling near-continuous availability power systems with a flexible range of power capacity. The Symmetra Power Array combines with the complete line of APC datacenter protection software & accessories to provide the four most critical elements of total datacenter protection: redundancy, scalability, manageability & serviceability. ...

APC sets the standard in its industry for quality, innovation & support. Its comprehensive solutions, which are designed for both home & corporate environments, improve the manageability, availability & performance of sensitive electronic, network, communications & industrial equipment of all sizes. The mission of APC is to improve the manageability, availability, & performance of information & communication systems through rapid development & delivery of innovative solutions to real customer problems. ...

APC sets the standard in its industry for quality, innovation & support. Its comprehensive solutions, which are designed for both home & corporate environments, improve the manageability, availability & performance of sensitive electronic, network, communications & industrial equipment of all sizes. The mission of APC is to improve the manageability, availability, & performance of information & communication systems through rapid development & delivery of innovative solutions to real customer problems.PRODUCT
Features: Battery modules connected in parallel; Hot-swappable batteries; Modular design; Plug-&-Play external batteries; User-replaceable batteries.
...

APC sets the standard in its industry for quality, innovation & support. Its comprehensive solutions, which are designed for both home & corporate environments, improve the manageability, availability & performance of sensitive electronic, network, communications & industrial equipment of all sizes. The mission of APC is to improve the manageability, availability, & performance of information & communication systems through rapid development & delivery of innovative solutions to real customer problems.PRODUCT
Features: Battery modules connected in parallel; Hot-swappable batteries; Modular design; Plug-&-Play external batteries; Stackable external battery frames; User-replaceable batteries.
...