APC AP8853 Rack PDU 2G, Metered, Zero U, 32A, 230V, (36) C13 & (6) C19 Key Features Nominal Output Voltage
- 230V Maximum
...

Rack PDU 2G, Switched, Zero U, 16A, 230V, (21) C13 & (3) C19, IEC309 Cord APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control & active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment & restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery & extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, & low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, & control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces & is complimented by APC Centralized Management platforms using Infra Struxure Central, Capacity Manager & Change Manager. Availability Network Management Capabilities Full-featured network management interfaces that provide standards-based management via Web, SNMP, & Telnet. Allows users to access, configure, & manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly & easily upgrade the firmware via network download to installed units for future product enhancements. Remote Individual Outlet Control Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime & avoid travel time to equipment). Alarm Thresholds Define alarm thresholds in order to avoid overloaded circuits. Network & visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability) Local Current Monitoring Display The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only) Power Delays Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits & dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly. Load indicator LED Indicates overload & warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits. Flash Upgradeable Quickly & easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only) Integrates with Struxure Ware Data Center Expert An IT-ready, scalable access monitoring system that collects, organizes, & distributes critical alerts, surveillance video & key information, providing a unified view of complex physical infrastructure environments from anywhere on the network Agility Rack-Mountable

Includes:: horizontal, vertical, & toolless-mount varieties. Puts power where it is needed most
- in the racks near the equipment. Single input power source Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. saves your valuable time & money during installation by using one branch whip & standard connections. Wide range of input & output connections Product family

Includes:: a variety of input & output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs & outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4k W using a single branch whip.
Includes:: All required connectors, Battery recycling guide, Installation guide, Reusable packaging





...

Switched Rack PDUs provide load metering combined with controlled on/off switching by individual outlets for remote power recycling, delayed power sequencing of equipment & outlet use management.APC Switched Rack Power Distribution Units (PDUs) place rack equipment power control in the hands of the IT Manager. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment & to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery & extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, & control Switched rack PDUs through secure Web, SNMP, or Telnet interfaces. ...

Switched Rack PDUs provide load metering combined with controlled on/off switching by individual outlets for remote power recycling, delayed power sequencing of equipment & outlet use management.APC Switched Rack Power Distribution Units (PDUs) place rack equipment power control in the hands of the IT Manager. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment & to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery & extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, & control Switched rack PDUs through secure Web, SNMP, or Telnet interfaces. ...

Switched Rack PDUs provide load metering combined with controlled on/off switching by individual outlets for remote power recycling, delayed power sequencing of equipment & outlet use management.APC Switched Rack Power Distribution Units (PDUs) place rack equipment power control in the hands of the IT Manager. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment & to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery & extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, & control Switched rack PDUs through secure Web, SNMP, or Telnet interfaces. ...

APC offers a wide variety of Basic Rack Power Distribution Units (PDUs), which allow users to distribute power outlets to rack-mount equipment. Horizontal & vertical units are available as well as a variety of power inputs & outputs to fit most power environments. ...

Features Toolless Rack Mounting Capabilities Server cases do not require additional tools to mount into Net Shelter Enclosures, which allows the users to quickly & easily mount units in the rear of the enclosure. Vertical Mounting Capabilities Easily mounts vertically in racks or enclosures & occupies zero U of valuable rack space, which allows more equipment in the rack. Units that mount vertically are optimized to fit in a Net Shelter enclosures. Availability Remote Management Capabilities Full-featured network management interfaces that provide standards-based management via Web, SNMP, & Telnet. Allows users to access, configure, & manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly & easily upgrade the firmware via network download to installed units for future product enhancements. Local Current Monitoring Display The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only) Alarm Thresholds Define alarm thresholds in order to avoid overloaded circuits. Network & visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability) Load indicator LED Indicates overload & warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits. Integrates with Struxure Ware Data Center Expert An IT-ready, scalable access monitoring system that collects, organizes, & distributes critical alerts, surveillance video & key information, providing a unified view of complex physical infrastructure environments from anywhere on the network Flash Upgradeable Quickly & easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only) Agility Rack-Mountable

Includes:: horizontal, vertical, & toolless-mount varieties. Puts power where it is needed most
- in the racks near the equipment. Single input power source Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. saves your valuable time & money during installation by using one branch whip & standard connections. Wide range of input & output connections Product family

Includes:: a variety of input & output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs & outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4k W using a single branch whip.




...

Rack PDU, Basic, 1U, 16A, 208/230V, (12)C13 Agility Rack-Mountable

Includes:: horizontal, vertical,

...

APC Basic Rack Power Distribution Units (PDUs), allow users to distribute power outlets to rack-mount equipment APC offers a wide variety of Basic Rack Power Distribution Units (PDUs), which allow users to distribute power outlets to rack-mount equipment. Horizontal & vertical units are available as well as a variety of power inputs & outputs to fit most power environments. Basic Rack PDUs are Infra Stru Xure Certified & mount vertically, without tools in the rear channel of a Net Shelter VX. Features Toolless Mounting Capabilities Units do not require additional tools to mount into APC Net Shelter Enclosure, which allows the users to quickly & easily mount units in the rear of the enclosure. Vertical Mounting Capabilities Easily mounts vertically in racks or enclosures & occupies zero U of valuable rack space, which allows more equipment in the rack. Units that mount vertically are optimized to fit in a Net Shelter enclosures. Agility Rack-Mountable

Includes:: horizontal, vertical, & toolless-mount varieties. Puts power where it is needed most
- in the racks near the equipment. Single input power source Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. saves your valuable time & money during installation by using one branch whip & standard connections. Wide range of input & output connections Product family

Includes:: a variety of input & output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs & outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4k W using a single branch whip. Total Cost of Ownership Low Cost Power Distribution Provides a number of outlets to bring power to rack equipment at an affordable price.
Includes:: Installation guide, Rack Mounting brackets





...

Basic Rack Power Distribution Units (PDUs) allow users to distribute power outlets to rack-mount equipment. APC offers a wide variety of Basic Rack Power Distribution Units (PDUs), which allow users to distribute power outlets to rack-mount equipment. Horizontal & vertical units are available as well as a variety of power inputs & outputs to fit most power environments. APC now offers Basic Rack PDUs that mount vertically, without tools in the rear channel of a Net Shelter VX. Features Toolless Mounting Capabilities Units do not require additional tools to mount into APC Net Shelter Enclosure, which allows the users to quickly & easily mount units in the rear of the enclosure. Vertical Mounting Capabilities Easily mounts vertically in racks or enclosures & occupies zero U of valuable rack space, which allows more equipment in the rack. Units that mount vertically are optimized to fit in a Net Shelter enclosures. Resettable circuit breakers Enables a quick recovery from overload events. Agility Rack-Mountable

Includes:: horizontal, vertical, & toolless-mount varieties. Puts power where it is needed most
- in the racks near the equipment. Single input power source Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. saves your valuable time & money during installation by using one branch whip & standard connections. Wide range of input & output connections Product family

Includes:: a variety of input & output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs & outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4k W using a single branch whip. Total Cost of Ownership Low Cost Power Distribution Provides a number of outlets to bring power to rack equipment at an affordable price. Specification Output Nominal Output Voltage
- 230V Maximum Total Current Draw per Phase
- 32A Output Connections- (20) IEC 320 C13 / (4) IEC 320 C19 Input Nominal Input Voltage
- 200V, 208V, 230V Input Frequency
- 47
- 63 Hz Input Connections
- IEC 309 32A 2P+E Cord Length
- 3.05 meters Number of Power Cords
- 1 Maximum Input Current per phase
- 32A Load Capacity
- 7360 VA Physical Net Weight
- 5.57 KG Maximum Height
- 1619.00 mm Maximum Width
- 56.00 mm Maximum Depth
- 44.00 mm Shipping Weight
- 6.48 KG Shipping Height
- 2134.00 mm Shipping Width
- 152.00 mm Shipping Depth
- 127.00 mm Color
- Black Environmental Operating Environment
- 0
- 45 °C Operating Relative Humidity
- 0
- 95% Operating Elevation
- 0-3000 meters Storage Temperature
- -25
- 65 °C Storage Relative Humidity
- 0
- 95% Storage Elevation
- 0-15000 meters Conformance Regulatory Approvals
- CE, VDE Standard Warranty
- 2 years repair or replace Sustainable Offer Status Ro HS
- Compliant REACH
- REACH: Contains No SVHCs
Includes:: Installation guide, Rack Mounting brackets, Toolless Mounting Kit






































...