Free up space & secure power cords between rack-mount PDUs & attached IT equipment with this exclusive easy-to-use cord retention method. These cords will fit into any standard IEC receptacle or power inlet. These locking connectors reduce the probability of accidentally disconnecting cords & dropping loads. ...

Power Cord Kit (6 ea), Locking, C19 to C20 (90 Degree), 1.2m Free up space & secure power cords between rack-mount PDUs & attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords & dropping loads. Specification Output Maximum Total Current Draw per Phase
- 16A Output Connections
- (1) IEC 320 C19 Cord Length
- 1.22 meters Input Input Connections
- IEC-320 C20 Cord Length
- 1.22 meters Number of Power Cords
- 6 Maximum Line Current per phase
- 16A Maximum Input Current per phase
- 16A Physical Net Weight
- 1.64 KG Maximum Height
- 300.00 mm Maximum Width
- 65.00 mm Maximum Depth
- 70.00 mm Shipping Weight
- 1.64 KG Shipping Height
- 300.00 mm Shipping Width
- 65.00 mm Shipping Depth
- 70.00 mm Color
- Black Units per Pallet
- 270.00 Environmental Operating Environment
- 0
- 75 °C Operating Relative Humidity
- 20
- 80% Operating Elevation
- 0-3000 meters Storage Temperature
- -25
- 75 °C Storage Relative Humidity
- 20
- 80% Storage Elevation
- 0-15000 meters Conformance Regulatory Approvals
- CCC, CSA, PSE, UL Listed, VDE Standard Warranty
- 2 years repair or replace Sustainable Offer Status
- Ro HS Compliant REACH
- REACH: Contains No SVHCs
Includes:: 3 Left-angle jumper cords, 3 Right-angle jumper cords
































...

Free up space & secure power cords between rack-mount PDUs & attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series Rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords & dropping loads. ...

Free up space & secure power cords between rack-mount PDUs & attached IT equipment with this exclusive easy-to-use cord retention method. While these cords will fit into any standard IEC receptacle or power inlet; the "locking" feature is enabled only when used with APC AP8000 series rack PDUs or IT equipment with built-in locking receptacles. These locking connectors reduce the probability of accidentally disconnecting cords & dropping loads. ...

Free up space & secure power cords between rack-mount PDUs & attached IT equipment with this exclusive easy-to-use cord retention method. This cord will fit into any standard IEC receptacle or power inlet. This locking connector reduces the probability of accidentally disconnecting cords & dropping loads. ...

APC sets the standard in its industry for quality, innovation & support. Its comprehensive solutions, which are designed for both home & corporate environments, improve the manageability, availability & performance of sensitive electronic, network, communications & industrial equipment of all sizes. The mission of APC is to improve the manageability, availability, & performance of information & communication systems through rapid development & delivery of innovative solutions to real customer problems. ...

Data line surges make up an overwhelming majority of all surge-induced damages where the equipment was thought to be already protected but had a back door such as a modem line unprotected. Network interface cards, in particular, can be destroyed by relatively mild spikes. According to Ethernet standards (IEEE 802.3), non-AC network electrical hazards include: direct contact between components & power or lightning circuits, static charge buildup on cables & component, high-energy transients coupled onto the local cabling system (those induced by other cables which are installed in the general proximity of network cables or lightning within a mile radius) & potential differences (even from building to building, between safety grounds to which components are connected). ...

Data line surges make up an overwhelming majority of all surge induced damages where the equipment was thought to be already protected but had a "back door" such as a modem line unprotected. Network interface cards, in particular, can be destroyed by relatively mild spikes. ...

Data line surges make up an overwhelming majority of all surge induced damages where the equipment was thought to be already protected but had a "back door" such as a modem line unprotected. Network interface cards, in particular, can be destroyed by relatively mild spikes. According to Ethernet standards (IEEE 802.3), non-AC network electrical hazards include: direct contact between components & power or lightning circuits, static charge buildup on cables & component, high-energy transients coupled onto the local cabling system (those induced by other cables which are installed in the general proximity of network cables or lightning within a mile radius) & potential differences (even from building to building, between safety grounds to which components are connected.) ...

Network AIR Rack-Mount Series. The " Network AIR Air Distribution Unit" is a unique 2U rack-mounted fan tray product that works with an existing precision air conditioning system to deliver cool air to the equipment contained in a rack enclosure. High-density equipment creates an environment where traditional air distribution methods are often not effective. Densely packed enclosures can cause IT equipment to overheat, resulting in downtime. The Rack Air Removal Unit SX captures exhaust heat, returns the warm air to the plenum & eliminates hot spots from the data center. Through automatic fan speed control based upon temperature, the fans will self-adjust for optimal performance. With a unit-mounted LCD display, users can view temperatures at the rack, monitor alarm conditions & adjust unit set points. The integrated network management card allows for remote monitoring & control. This space-saving solution mounts to the back of either the Net Shelter SX or VX enclosure, requiring zero U space.
Includes:: Documentation CD, Installation guide, Operations & maintenance manual Standard Lead Time: Usually in Stock
...