The One for All For new builders & seasonal system integrators alike, everyone will find something to like in Antec's One. This enclosure is stocked with features any builder will value at an attractive price — ample cooling, USB (Universal Serial Bus) 3.0, tool-less 5.25" & 3.5" drive bays & bottom-mounted PSU intake with air filter — so that you can put your PC together with ease & get to the fun stuff. If you're looking for high quality PC essentials at an affordable cost, then this enclosure is the One for you.

Features: 10 drive bays: 3 x 5.25" / 5 x 3.5" / 2 x 2.5" Motherboards: Standard ATX, micro ATX, Mini-ITX Maximum graphics card length: 10.5" (266 mm) Maximum CPU cooler

Height: 6.1" (155 mm) Cooling system:
- 1 x 120 mm top exhaust fan
- 1 x 120 mm rear exhaust fan
- 1 x 120 mm side intake fan (Not Included)
- 1 x 120 mm front intake fan (Not Included)
- 1 x 120 mm / 140 mm bottom fan (Not Included) 7 expansion slots Maximum-sized CPU cutout Water cooling support: rear water cooling grommets (support 0.5-inch tubes) Bottom-mounted power supply with intake filter No power supply included Front I/O ports:
- 2 x USB (Universal Serial Bus) 3.0 with included USB (Universal Serial Bus) 2.0 adapter
- Audio In/ Out Unit Dimensions:
- 17.2" (H) x 8.2" (W) x 19.2" (D)
- 438 mm (H) x 208 mm (W) x 488 mm (D)












...

Antec P100 Tower Gaming ATX Case 2 x USB3 Soundproofed Toolless 2 x FDB Fans Description The P100 is an ATX case that epitomizes cool, quiet, & sophistication. It features Antec’s award winning the Performance One series design & Quiet Computing™ technologies that minimize system noise. In addition to 7 expansion slots, the P100 also supports 2 tool-less 5.25” drives & 7 tool-less 3.5”/ 2.5” drives. With a great price to feature ratio the P100 is the only economical case that delivers first class silence performance. A balance of price & feature is achieved by integrating Antec design with superior build quality. Engineered with Quiet Computing™ Technology, the P100 is truly in a class all its own. Key Features Dual layer design
- steel & foam deadens noise Cable Routing
- Grommet-lined cable routing holes with 20 mm of space behind the motherboard tray Cooling design
- Supports 240mm radiators in the top Sleek Design
- Front bezel door opens up to 270 degrees Case Specifications Form Factor: Midi Tower Motherboard Support: ATX, Micro ATX PSU Support: Standard ATX Gaming Case: Yes Water Cooling Ready: Yes Dimensions: 600 X 290 X 540 (H x W x D) Body

Material: 0.8mm Steel Front Bezel

Material: Aluminium Side Panel: Solid External Bays: 2 x 5.25” External Internal Bays: 7 x 3.5” Internal 7 x 2.5” Internal Drive Bay Notes: Expansion Slots: 7 x Full Size Cooling Front: 2 x 120 / 140 mm front intake fans (optional) Cooling Top: 1 x 120 / 140 mm top exhaust fan Cooling Rear: 1 x 120 mm rear exhaust fan Cooling Side: None Cooling Bottom: None IO Ports: 2 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 1 x HD Audio (Also Supports AC'97) 1 x Microphone Front Bezel

Colour: Black/ Silver Body

Colour: Black System Cabinet

Features: PSU Included: No Net Weight (KGs): 8 KGs













...

The Antec P183 epitomizes cooling, quiet & sophistication. An Antec-exclusive three-layer side & front panel design (aluminum, plastic, aluminum) reduces noise & ensures Quiet Computing™. The P183 also boasts a dual chamber design that isolates the power supply from the rest of the components, minimizing heat & reducing system noise. Additional features include two internal 2.5" SSD bays, an external control for fans, cable management & a special gunmetal gray finish for one-of-a-kind style. Features Dual chamber design isolates heat & noise Power supply option: Comes with a power supply mounting adapter to mount either a standard size power supply or Antec’s exclusive CP series power supply 13 drive bays:
- 4 x external 5.25"; 1 x 3.5"
- 6 x internal 3.5" for HDD
- 2 x internal 2.5" for SSDs Advanced cooling system
- 1 rear 120 mm Tri Cool™ fan
- 1 top 120 mm Tri Cool™ fan
- 2 front (optional) 120 mm fan for HDD Cable organizers behind motherboard tray minimize cable clutter CPU cutout allows for easy installation of CPU coolers Three-layer, sound-deadening side panels & front door (aluminum, plastic, aluminum) dampens noise & ensures Quiet Computing™ Double-hinged door opens to 270° 7 expansion slots Built-in washable air filters inside front panel Front ports
- 2 x USB (Universal Serial Bus) 2.0
- 1 x USB (Universal Serial Bus) 3.0
- Audio In & Out (HDA & AC'97 compatible) 0.8 mm cold rolled steel for durability; 1.0mm cold rolled steel around 4 x HDD area Motherboard: Mini-ITX, micro ATX No power supply included Unit Dimension
- 540 mm (H) x 205 mm (W) x 507 mm (D)
- 21.3" (H) x 8.1" (W) x 19.9" (D) Package Dimension
- 635 mm (H) x 305 mm (W) x 610 mm (D)
- 25" (H) x 12" (W) x 24" (D) Weight
- Net: 31 lbs / 14 kg
- Gross: 36 lbs / 16.3kg














...

Sophisticated Performance Refined Sophisticated & cutting-edge, the Antec P280 emphasizes the ease of use, quiet technology & unparalleled performance characteristic of Antec's Performance One series. This advanced enclosure comes equipped with features that will maximize your PC experience, from Quiet Computing™ panels & HDD drive bays, to grommet-lined cable routing holes with ample space behind the motherboard tray. The P280 accommodates motherboards up to XL-ATX &

Includes:: nine expansion slots to support up to four 13.0" / 330 mm graphics cards. & with convenient tool-less optical drive bays, easy-access front & bottom PSU intake air filters, two front panel USB (Universal Serial Bus) 3.0 ports & an affordable price, you get an elite enclosure that will last you for builds to come. Specifications Model Antec P280 Case Type Super Mid Tower Color (s) Black with gunmetal anodized aluminum front door Cooling System • 2 x 120 mm top Two Cool™ exhaust fans • 1 x 120 mm rear Two Cool™ exhaust fan • 2 x 120 mm internal intake fans (not included) • 2 x 120 mm front intake fans (not included) • Fan power hub means that you can connect four 3-pin fans to a single Molex for enhanced cable management Drive Bays • 3 x 5.25” tool-less drive bays • 2 x 2.5” drive bays (dedicated) • 6 x 3.5” / 2.5” drive trays Front Ports 2 x USB (Universal Serial Bus) 3.0 with internal motherboard connector 2 x USB (Universal Serial Bus) 2.0 Audio In/ Out Expansion Slots / video card size • 9 expansion slots • Maximum video card

Size: 13” / 330 mm Maximum CPU Cooler Height 6.7" / 170 mm PSU No power supply included Motherboard Support XL-ATX [13.6” x 10.3” (345 mm x 262 mm)], Standard ATX, micro ATX, Mini-ITX CPU Cutout Enlarged CPU cutout Cable Management 30 mm of cable routing space behind motherboard tray Side panel features None Dimensions • Unit Dimensions:
- 526 mm (H) x 231 mm (W) x 562 mm (D) -20.7” (H) x 9.1” (W) x 22.1” (D) • Package Dimensions: -575 mm (H) x 290 mm (W) x 630 mm (D) -22.6” (H) x 11.4” (W) x 24.8” (D) Weight • Net Weight: 22.3 lbs / 10.2kg




...

With its simplicity & elegance, the P380 is a successful blend of the stylish design, sophisticated cooling & proven Quiet Computing features of Antecs award-winning Performance One enclosure series. Like all models in the series, the P380 is equipped with double-layered noise-dampening side panels, creating a system that is almost inaudible even when the fans are spinning at a high speed. With roomy interior, the P380 is compatible with CEB & standard ATX motherboards &

Includes:: nine expansion slots to support up to 18.3” long graphics cards. The P380 also offers advanced computing features like dual power / reset button design, grommet-lined cable routing paths, elegant aluminium front panel features two well placed USB (Universal Serial Bus) 3.0 & USB (Universal Serial Bus) 2.0 ports, & audio in/out jacks. The case boasts one slim optical drive bay, three anti-vibration 3.5"/2.5” removable drive cages (eight 3.5"/2.5” HDD bays). The chassis support the ability to flip the I/O panel (USB Ports & Audio ports) to either the left side or right side of the chassis for ultra ease of use to enable you to position your chassis either side of your monitor. The front bays all are removable to allow for excellent watercooling radiator support. You can mount a 3 bay HDD cage in the base of the chassis in the middle to provide HDD support & full radiator support too. Key Features Hidden ODD bay - A front mounted hidden slim ODD tray to ensure the best, most subtle of sytlish designs Modular storage bays - HDD & 5.25" bays are all fully removable to provide maximium airflow & watercooling support Fan power hub - 6 x 3pin Fan hub power board on rear side of motherboard tray Customisable ports - I/O port is switchable to either right side or left Great cable management - Grommited cable management holes with massive space behind the motherboard tray Amazing quality build materials - Full 6mm Aluminum top/front panel for quality finese not seen before on any PC chassis Silencing properties - Dual Layer sound dampening design & rubbberised HDD trays to reduce noise Case Specifications Form Factor: Full Tower, Micro ATX Motherboard Support: ATX, Micro ATX, Extended ATX, Mini ITX PSU Support: Standard ATX, Micro ATX, Extended ATX Gaming Case: Yes Water Cooling Ready: Yes Dimensions: 224mm x 555mm x 557mm (W x H x D) Packaging Dimensions: 265mm x 600mm x 600mm (W x H x D) Body

Material: 0.8mm SGCC Front Bezel

Material: Aluminium Side Panel: Window External Bays: 1 x Slimline Optical Internal Bays: 8 x 3.5” Internal 8 x 2.5” Internal Drive Bay Notes: Expansion Slots: 9 x Full Size Cooling Front: 3 x 120mm/2 x 140mm front intake fan mount Cooling Top: 3 x 120mm/2 x 140mm top exhaust fan mount (2 x 140mm FDB fan pre-installed) Cooling Rear: 1 x 120 mm rear exhaust fan mount (1 x 120mm FDB fan pre-installed) Cooling Side: None Cooling Bottom: None IO Ports: 2 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 1 x HD Audio (Also Supports AC'97) 1 x Microphone Front Bezel

Colour: Gun Metal Body

Colour: Black System Cabinet

Features: 1 x 360mm radiator / 1 x 240mm radiator at front 1 x 360mm radiator / 1 x 240mm radiator on the top PSU Included: No Net Weight (KGs): 9.8 KGs General Specifications Manufacturer Part Number: 0-761345-83800-9 EAN Number: 0761345838009 Has Mains Plug: No

Colour: Black & Gun metal What's In The Box: Case Accessories Manual Unit (Product)

Dimensions (mm): 224mm x 555mm x 557mm (W x H x D) Packaging

Dimensions (mm): 265mm x 600mm x 600mm (W x H x D) Net Weight (KGs): 9.8 KGs Gross Weight (KGs): 11.5 KGs

















...

Extended ATX Performance One Case Larger & more versatile, the Antec P193 stands apart from the competition with room to handle the most advanced hardware out there. It has support for two 2.5” SSD drives, a CPU cutout to make swapping heatsinks a breeze & Quiet Computing™ technologies like silicone grommets & sound-deadening side panels. The P193 expands on its proven design with a dual chamber design for excellent cooling, USB (Universal Serial Bus) 3.0 support & up to seven variable-speed fans. Delivering a new Performance One case that offers size & versatility alongside Quiet Computing™ & exceptional cooling, the P193 is in a class all its own. Features • Dual chamber design isolates heat & noise • Power supply option: Comes with a power supply mounting adapter to mount either a regular ATX size power supply or Antec’s exclusive CP series power supply • 13 drive bays
- 4 x external 5.3"
- 1 x external 3.5”
- 6 x internal 3.5" for HDD
- 2 x internal 2.5” for SSD • Advanced cooling system
- 1 rear 120 mm Tri Cool™ exhaust fan
- 2 top 140 mm Tri Cool™ exhaust fans
- 1 side 200 mm fan for dual graphics cards
- 2 front (optional) 120 mm fan for HDD • Three-layer, sound-deadening front door (aluminum, plastic, aluminum) & 2-layer side panels dampen noise & ensure Quiet Computing • Double-hinged door opens to 270° • Cable organizers behind motherboard tray minimize cable clutter • CPU cutout allows for easy installation of CPU coolers • 7 expansion slots • Air filters inside front panel • Front ports
- 2 x USB (Universal Serial Bus) 2.0
- 1 x USB (Universal Serial Bus) 3.0
- Audio In & Out (HDA & AC’97 compatible) • 0.8 mm cold rolled steel for chassis durability; 1.0 mm cold rolled steel around 4 x HDD area • Motherboard: Mini-ITX, micro ATX, Standard ATX & Extended ATX • No power supply included • Case dimensions: 20.3” (H) x 8.1” (W) x 23.3” (D) 515 mm (H) x 205 mm (W) x 591 mm (D)










...

Case fans help protect your whole computer investment by providing case cooling to reduce component-killing heat buildup, thus increasing the longevity of components.PRODUCT
Features: Choose your power source
- 3-pin connector & 4-pin adapter with power pass-through both provided; Fan speed monitoring capability with compatible motherboards; Double ball-bearing design for longer life.

...

Created exclusively for the Antec Minuet 350 micro ATX case, the MT-352 upgrade power supply provides all the functionality of the MT-350 & adds 80 PLUS Bronze certification for increased efficiency over its predecessor. An ideal choice for stable & efficient power, the MT-352 features Universal Input packaged within a petite small form factor design. Dual +12V output rails deliver safer, more stable & more reliable output to the system’s components. With 3 Molex & 2 SATA & 1 floppy connector, the MT-352 can accommodate nearly any combination of hardware in the Minuet 350. Upgrade your PSU & add greater efficiency to your system with MT-352. • 350 watts of Continuous Power • 80 PLUS Bronze certified – up to 88% efficient • Dual +12V rails for increased stability • 80 mm double ball bearing low noise cooling fan • Meets ATX12V version 2.3 • Industrial-grade protection - Over voltage protection (OVP) - Short circuit protection (SCP) - Over power protection (OPP) • Universal Input – works on any 100V
- 240V grid • Active Power Factor Correction with PF: 0.99 • MTBF: 100, 000 hours • Meets 2010 EUP requirement: 5 Vsb < 1W • Safety: c UL, TUV, CE, CB, FCC, C-TICK, CCC, Gost-R • AQ3 Antec Quality 3 year limited warranty on parts & labor • Dimensions: 2.7” (H) x 3.6” (W) x 6.1” (D) 69 mm (H) x 92 mm (W) x 155 mm (D) • Net Weight: 2.5 lbs / 1.1kg
...

Legendary silence
- Antec Sonata III (Sonata 3) The third evolution in the quest for silent computing by antec. Continuing the
...

The affordable Quiet Computing™ case is here. Introducing the Sonata Proto: get all the features & performance of the renowned Sonata line of enclosures without breaking the bank. With 9 drive bays, 7 expansion slots, an intake air filter, the Sonata Proto offers a plethora of features & has all the quiet performance that the Sonata line is famous for. Along with its convenient front mounted USB (Universal Serial Bus) 2.0 & HD audio connectors, the Sonata Proto is the ideal combination of silence, efficiency & affordability. Features 9 drive bays:
- External 3 x 5.25"
- External 2 x 3.5"
- Internal 4 x 3.5"
- Internal 1 x bottom-mounted 2.5" SSD drive 7 expansion slots Advanced cooling system:
- 1 rear 120mm Two Cool™ two-speed switch control exhaust fan
- 1 middle (optional) 120mm fan Built-in washable air filter Front mounted I/O ports:
- 2 x USB (Universal Serial Bus) 3.0
- Audio In & Out (AC'97 & HDA compatible) 0.8mm cold rolled steel for durability Power supply not included Compatible motherboards: Mini-ITX, micro ATX, Standard ATX Unit dimensions:
- 17.0" (H) x 8.51" (W) x 18.7" (D)
- 430 mm (H) x 216 mm (W) x 475 mm (D) Package dimensions:
- 19.7" (H) x 10.7" (W) x 21.7" (D)
- 500 mm (H) x 270 mm (W) x 550 mm (D) Weight:
- Net: 16.7 lb / 7.5 kg
- Gross: 22 lb / 10kg













...