The AT-FS708LE is an ideal fit for small business networks. The robust metal chassis can be mounted to the wall or desktop. The AT-FS708LE is fully auto-configuring, which means minimal set up for you. Auto-sensing ports connect existing 10 Mbps Ethernet & 100 Mbps Fast Ethernet UTP devices seamlessly. Auto MDI/MDIX on all ports easily connect other hubs & switches. The user friendly front panel shows ongoing switch status & simplifies troubleshooting. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Allied Telesis'' AT-MC1004 Gigabit Ethernet media converters extend the reach of Gigabit Ethernet networks through the use of multi-mode & single-mode fiber-optic cabling. By converting 1000T copper connections to 1000SX or LX connections, these Gigabit Ethernet media converters can extend segment lengths up to 10km. Although the provisioning of Gigabit Ethernet connections is becoming relatively inexpensive, thanks in part to the availability of lower-cost copper Gigabit network adapters, the distance limitations of copper cabling make fiber segments a necessity in most networks. Small, comparatively inexpensive copper to fiber Gigabit Ethernet media converters present a simple & very cost-effective way of connecting Gigabit Ethernet LANs over extended distances. To aid installation these media converters support an auto-sense MDI/MDIX port, allowing the media converter to connect directly with either a switch, PC adapter, or other Gigabit Ethernet device, using a standard cable. The AT-MC1004 Gigabit Ethernet media converters are powered by an external power supply for use in standalone applications. Where multiple media converters are used, up to 12 standalone devices can be inserted into the low-cost AT-MCR12 rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis. ...

The Allied Telesis' range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fiber cabling. When connecting media converters to auto-negotiating Fast Ethernet switches, these media converters will automatically connect the link in either Full or Half-Duplex mode, allowing the link to be established with the greatest bandwidth. Alternatively, the Missing Link feature allows accurate reporting to network management systems as well as allowing devices with redundant link capability to be inter-connected with these media converters, as a failure in one fiber link will be signaled to the switch, allowing the second link to become active. These media converters feature an internal MDI/MDIX switch, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable. The media converters also allow the installer to test the integrity of fiber connection, by forcing the converters to communicate over the fiber cable. This ' Link Test' feature allows installers to check for cable faults without the need for expensive fiber optic test equipment. ...

Spool, Line fits BLACK, DECKER manual feed models D9, D609, D610, D623, D625, GL20, GL110, GL120, GL200/C, GL220S/SC, GL225/SC, GL300, GL320/C, GL325, GL400, GL2000, GLC400, GLC401, RA23, RT250S, RT225G/S, ST20/C/RC, ST22C, ST23, ST200. Compares to A6044. ...

Suitable for: BLACK & DECKER Reflex machines (single line models); GL30, GL120/C, GL280, GL301, GL340, GL420C, GL420XC, GL423C, GL425C/S/SC/XC, GL430C/S/SC, GL530, GL540, GL544, GL544C, GL545, GL545C/SC, GL547, GL550, GL555XC, GL560, GL560PXC, GL570/C, GL580/C, GL2500, GLC120, GLC2000, GLC2500, GLC3000 Grass Hog (single line models) GH400, GH500, GH600, GH700, GH1000, CST1000, CST2000, NST2018, ST6600, ST7000, ST7500, ST7700. ...

The ALM Replacement Chainsaw chains fit a wide range of chainsaw makes & models. The ALMCH055 Chainsaw Chain has a 3/8 inch Low profile (L/P), 0.043in guide bar slot 0.375 mm & Low profile (L/P) 1.1 mm guide bar slot. This chain is made to fit the Flymo range & suit saws with a 40cm bar & chain with 55 drive links including: Woodshark. ...

Spool & Line (twin line)fits Flymo Double Autofeed (twin line) models; Contour, Contour 500, Contour 500 Power Plus, Contour 700, Contour 700 Power Plus, ET23, Minitrim Auto 2003, Minitrim Auto Plus, Multi Trim 250D/250DX/300D/300DX, Power Trim, Power Trim 500 (product no: 9648596-25/62), Power Trim 700 (product no: 9648597-25/62), Revolution 2000/2300/2500 (twin line), Twistn Edge & Power Trim 500XT. Compares to 5137651-90/6, 5137651-01/3, 5139371-84/9, FLY021, JCB LT32600F, SOVEREIGN 500W HG500B Article number 537610. ...

Ronseal Quick Drying Woodstain is an easy to apply woodstain that is rainproof in just 30 minutes, highly water repellent, resists cracking & peeling & protects the wood from the suns harmful UV rays. Ronseal Quick Drying Woodstain can be applied to bare or previously stained wood, & is ideal for doors, window frames, cladding, garden furniture & all smooth planed timber.

Colour: Antique Pine. Finish
- Satin. 250 ml.


...

To suit: Flymo E25/E30/E38/E47/E52/E250/E300/E400, XE30/38/47/250/300/400, Easibag, Hover Compact 300/330/350, Hoverstripe RXE250/RXE300, Hovervac 3000/4000, L300 Micro Compact 300 Plus, Minimo, Minimo Plus XE, Sprinter E25/E30/E38/E250/E300/E400, Sprintmaster XE25/XE30/XE38/XE250, Turbo Compact 300/330/350/380, Turbo Compact Vision 330/350/380, Turbolite 330/350/400, Vision Compact 330/350/380/350. ...

Woodcarving chisel with real wood handle, deep seated tang, chrome plated steel ferrule & fully polished blade. Gouges are designed with a concave blade to remove wood

Material: without causing splintering. The depth of the curve or sweep determines the depth of cut. Blade

Width: 12.7 mm. 1/2 in. Hardwood Handle.



...