Details: Aerocool Introduces The XPredator X1 For those who have dreamed of owning an XPredator case but never end up
...

X-Predator X3 Avenger Edition We are proud to announce Aerocools range of super tower cases
- the X-Predator X3, Avenger Edition.
...

Aerocool Introduces The XPredator X3 For those who have dreamed of owning an XPredator case but never end up getting one due to its sheer chassis size, now here is the good news: Aerocool has introduced the new XPredator X3.

Dimensions of the Different Cases (H x W x D) The original XPredators
- 600mm x 234mm x 555mm The XPredator X3
- 527mm x 223mm x 533mm The XPredator X1
- 482mm x 190mm x 475mm The XPredator X3 is a high-midi case & comes in three colors which are Evil Black Edition, Devil Red Edition & White Edition. Although it is smaller in size compared to the original XPredator, this chassis is still wide enough to accommodate a 20cm LED fan at the front panel. On the top panel, just like its predecessor, two fan controller knobs each can support up to 25W, far more advanced than the original one of only 10W per channel. Inside the chassis, you can mount up to 8 HDDs & there are 8 expansion slots plus a 310mm depth for high-end graphic cards installation. Both X1 & X3 are designed to look "within the family"
- the scale-like ventilation on the top panel can be opened & closed for better air flow regulation
- its distinct feature that can be seen in all XPredators. Key Features • Solidly constructed chassis interior (0.7mm SPCC) • Supports CPU cooler max. height up to 186mm (without fans on side panel) • Supports Long VGA Cards up to 310mm. •
Includes: 1 x 12cm Black fan at rear & 1 x 20cm LED fan in front. • Top panel flaps can be opened or closed to control air flow more efficiently. Dust filter for PSU. •
Includes: 1 x external 2.5" HDD docking on top panel for easy access. •
Includes: two fan controller knobs each controls fan/s up to 25W. • Install up to 9 fans! •
Includes: antivibration pads for HDDs & PSU. • Cable Routing Management holes with high-end rubber grommets to protect your cables. • USB3.0 >USB2.0 adaptor included. • Pre-drilled CPU holes for easy mounting & removable of CPU cooler. • Support water cooling. • 2 x USB3.0 & Audio/ Mic ports are easily accessible from top panel. Case Specifications • Form Factor: Midi Tower • Motherboard Support: ATX, Micro ATX, Mini ITX • PSU Support: Standard ATX • Gaming Case: Yes • Water Cooling Ready: Yes • Dimensions: 223mm x 527mm x 533mm (W x H x D) • Packaging Dimensions: 270mm x 589mm x 560mm (W x H x D) • Body
Material: 0.7/0.6 SECC • Front Bezel
Material: Plastic • Side Panel: Window / Vented • External Bays: 3 x 5.25” External • 1 x 3.5” External • Internal Bays: 8 x 3.5” Internal • 8 x 2.5” Internal • Drive Bay Notes: • Expansion Slots: 8 x Full Size • Cooling Front: 1 x 20cm Red LED fan included • Cooling Top: 1 x 20 or 2 x 12 or 2 x 14cm fans (Optional) • Cooling Rear: 1 x 12 or 14 cm fan (1 x 14cm Black fan included) • Cooling Side: 2 x 12 or 2 x 14 cm fans (Optional) • Cooling Bottom: 1 x 12 or 14cm fan (Optional) • IO Ports: 2 x USB (Universal Serial Bus) 3.0 • 2 x USB (Universal Serial Bus) 2.0 • 1 x HD Audio • 1 x Microphone • Front Bezel
Colour: Black/ Red Mesh • Body
Colour: Black • System Cabinet
Features:
Includes: 2 x Fan Controller knobs each support up to 25W • Removable & washable PSU dust filter • PSU Included: No • Net Weight (KGs): 8.66 KGs
















...

Aerocool Introduces The XPredator X3 For those who have dreamed of owning an XPredator case but never end up getting one due to its sheer chassis size, now here is the good news: Aerocool has introduced the new XPredator X3.

Dimensions of the Different Cases (H x W x D) The original XPredators
- 600mm x 234mm x 555mm The XPredator X3
- 527mm x 223mm x 533mm The XPredator X1
- 482mm x 190mm x 475mm The XPredator X3 is a high-midi case & comes in three colors which are Evil Black Edition, Devil Red Edition & White Edition. Although it is smaller in size compared to the original XPredator, this chassis is still wide enough to accommodate a 20cm LED fan at the front panel. On the top panel, just like its predecessor, two fan controller knobs each can support up to 25W, far more advanced than the original one of only 10W per channel. Inside the chassis, you can mount up to 8 HDDs & there are 8 expansion slots plus a 310mm depth for high-end graphic cards installation. Both X1 & X3 are designed to look "within the family"
- the scale-like ventilation on the top panel can be opened & closed for better air flow regulation
- its distinct feature that can be seen in all XPredators. Key Features • Solidly constructed chassis interior (0.7mm SPCC) • Supports CPU cooler max. height up to 186mm (without fans on side panel) • Supports Long VGA Cards up to 310mm. •

Includes:: 1 x 12cm Black fan at rear & 1 x 20cm LED fan in front. • Top panel flaps can be opened or closed to control air flow more efficiently. Dust filter for PSU. •

Includes:: 1 x external 2.5" HDD docking on top panel for easy access. •

Includes:: two fan controller knobs each controls fan/s up to 25W. • Install up to 9 fans! •

Includes:: antivibration pads for HDDs & PSU. • Cable Routing Management holes with high-end rubber grommets to protect your cables. • USB3.0 >USB2.0 adaptor included. • Pre-drilled CPU holes for easy mounting & removable of CPU cooler. • Support water cooling. • 2 x USB3.0 & Audio/ Mic ports are easily accessible from top panel. Case Specifications • Form Factor: Midi Tower • Motherboard Support: ATX, Micro ATX, Mini ITX • PSU Support: Standard ATX • Gaming Case: Yes • Water Cooling Ready: Yes • Dimensions: 223mm x 527mm x 533mm (W x H x D) • Packaging Dimensions: 270mm x 589mm x 560mm (W x H x D) • Body
Material: 0.7/0.6 SECC • Front Bezel
Material: Plastic • Side Panel: Window / Vented • External Bays: 3 x 5.25” External • 1 x 3.5” External • Internal Bays: 8 x 3.5” Internal • 8 x 2.5” Internal • Drive Bay Notes: • Expansion Slots: 8 x Full Size • Cooling Front: 1 x 20cm Orange LED fan included • Cooling Top: 1 x 20 or 2 x 12 or 2 x 14cm fans (Optional) • Cooling Rear: 1 x 12 or 14 cm fan (1 x 14cm Black fan included) • Cooling Side: 2 x 12 or 2 x 14 cm fans (Optional) • Cooling Bottom: 1 x 12 or 14cm fan (Optional) • IO Ports: 2 x USB (Universal Serial Bus) 3.0 • 2 x USB (Universal Serial Bus) 2.0 • 1 x HD Audio • 1 x Microphone • Front Bezel
Colour: Black/ Orange Mesh • Body
Colour: Black • System Cabinet
Features:

Includes:: 2 x Fan Controller knobs each support up to 25W • Removable & washable PSU dust filter • PSU Included: No • Net Weight (KGs): 8.66 KGs





















...

Aerocool Introduces The XPredator X3 For those who have dreamed of owning an XPredator case but never end up getting one due to its sheer chassis size, now here is the good news: Aerocool has introduced the new XPredator X3.

Dimensions of the Different Cases (H x W x D) The original XPredators
- 600mm x 234mm x 555mm The XPredator X3
- 527mm x 223mm x 533mm The XPredator X1
- 482mm x 190mm x 475mm The XPredator X3 is a high-midi case & comes in three colors which are Evil Black Edition, Devil Red Edition & White Edition. Although it is smaller in size compared to the original XPredator, this chassis is still wide enough to accommodate a 20cm LED fan at the front panel. On the top panel, just like its predecessor, two fan controller knobs each can support up to 25W, far more advanced than the original one of only 10W per channel. Inside the chassis, you can mount up to 8 HDDs & there are 8 expansion slots plus a 310mm depth for high-end graphic cards installation. Both X1 & X3 are designed to look "within the family"
- the scale-like ventilation on the top panel can be opened & closed for better air flow regulation
- its distinct feature that can be seen in all XPredators. Key Features • Solidly constructed chassis interior (0.7mm SPCC) • Supports CPU cooler max. height up to 186mm (without fans on side panel) • Supports Long VGA Cards up to 310mm. •
Includes: 1 x 12cm Black fan at rear & 1 x 20cm LED fan in front. • Top panel flaps can be opened or closed to control air flow more efficiently. Dust filter for PSU. •
Includes: 1 x external 2.5" HDD docking on top panel for easy access. •
Includes: two fan controller knobs each controls fan/s up to 25W. • Install up to 9 fans! •
Includes: antivibration pads for HDDs & PSU. • Cable Routing Management holes with high-end rubber grommets to protect your cables. • USB3.0 >USB2.0 adaptor included. • Pre-drilled CPU holes for easy mounting & removable of CPU cooler. • Support water cooling. • 2 x USB3.0 & Audio/ Mic ports are easily accessible from top panel USB3.0 >USB2.0 adaptor included Case Specifications • Form Factor: Midi Tower • Motherboard Support: ATX, Micro ATX, Mini ITX • PSU Support: Standard ATX • Gaming Case: Yes • Water Cooling Ready: Yes • Dimensions: 223mm x 527mm x 533mm (W x H x D) • Packaging Dimensions: 270mm x 589mm x 560mm (W x H x D) • Body
Material: 0.7/0.6 SECC • Front Bezel
Material: Plastic • Side Panel: Window / Vented • External Bays: 3 x 5.25” External • 1 x 3.5” External • Internal Bays: 8 x 3.5” Internal • 8 x 2.5” Internal • Drive Bay Notes: • Expansion Slots: 8 x Full Size • Cooling Front: 1 x 20cm White LED fan included • Cooling Top: 1 x 20 or 2 x 12 or 2 x 14cm fans (Optional) • Cooling Rear: 1 x 12 or 14 cm fan (1 x 14cm Black fan included) • Cooling Side: 2 x 12 or 2 x 14 cm fans (Optional) • Cooling Bottom: 1 x 12 or 14cm fan (Optional) • IO Ports: 2 x USB (Universal Serial Bus) 3.0 • 2 x USB (Universal Serial Bus) 2.0 • 1 x HD Audio • 1 x Microphone • Front Bezel
Colour: White • Body
Colour: White / Black Mesh • System Cabinet
Features:
Includes: 2 x Fan Controller knobs each support up to 25W • Removable & washable PSU dust filter • PSU Included: No • Net Weight (KGs): 8.66 KGs
















...

The X-Warrior Like a Warrior in an armored suit on the battle field, the fierce looking X-Warrior is one of the coolest gaming cases which is affordable & yet charismatic in its own design & certainly a great show-off to your friends. The case is one of the best value cases in the market today if not the best value case. The chassis is beautifully finished in all black interior constructed with 0.5mm SECC. The chassis supports 3 x 5.25" devices, 1 x FDD (with adaptor) & 4 x 3.5" HDD + 1 x 2.5" SSD. X-Warrior supports long high-end graphics cards up to 400mm which is more than sufficient for those heavy PC users. The cable management holes are pre-drilled on the MB to reduce the cable mess inside chassis. A CPU hole is also pre-drilled on the MB for easy mounting of CPU cooler. The X-Warrior is the best gaming case your money can buy! Key Features • High performance " Mid-Tower" for gamers & enthusiast. • Solidly constructed chassis 0.5mm SECC Japanese Steel. • ALL BLACK interior with "blue" PCI plate & screw-less knobs (Black Edition) or ALL RED interior with “BLACK PCI plate & “RED screw-less knobs (Red Edition) for an unique touch! • Supports longer high-end VGA cards up to 400mm • Supports 3 x 5 1/4", 1 x 3.5" (with adaptor), 1 x 2.5" HDD & maximum 4 x 3.5" HDDs (internal) • " Easy-install" screw-less kits for the 5 1/4" devices • Cable management holes are pre-drilled to reduce cable mess • CPU hole is pre-drilled on the MB plate for ease of CPU cooler assembly • Can install 2x 12cm fan at side panel (optional) / 1x 12cm fan at rear (included) & 2x 12cm fans in front (one fan included) • Bottom PSU position enables PSUs to suck in cold air for better cooling with washable dust filter. • Water-cooling holes are pre-drilled to support water-cooling systems • 2 x USB/ Audio + Mic (AC + HD audio) are easily accessible from the top panel. Case Specifications • Form Factor: Midi Tower • Motherboard Support: ATX, Micro ATX • PSU Support: Standard ATX • Gaming Case: Yes • Water Cooling Ready: Yes • Dimensions: 187mm x 488mm x 520mm (W x H x D) • Packaging Dimensions: 255mm x 535mm x 595mm (W x H x D) • Body
Material: SECC 0.50mm • Front Bezel
Material: ABS Plastic + Mesh • Side Panel: Vented • External Bays: 3 x 5.25” External • 1 x 3.5” External • Internal Bays: 4 x 3.5” Internal • 1 x 2.5” Internal • Drive Bay Notes: • Expansion Slots: 7 x Full Size • Cooling Front: 1 x 12cm RED LED fan (included) + 1 x 12cm (optional) • Cooling Top: None • Cooling Rear: 1 x 12cm fan (included) • Cooling Side: 2 x 12cm fan (optional) • Cooling Bottom: None • IO Ports: 2 x USB (Universal Serial Bus) 2.0 • 1 x HD Audio (Also Supports AC97) • 1 x Microphone • Front Bezel
Colour: Black • Body
Colour: Black • System Cabinet
Features: • PSU Included: No • Net Weight (KGs): 6 KGs




...

The X-Warrior Like a Warrior in an armored suit on the battle field, the fierce looking X-Warrior is one of the coolest gaming cases which is affordable & yet charismatic in its own design & certainly a great show-off to your friends. The case is one of the best value cases in the market today if not the best value case. The chassis is beautifully finished in all black interior constructed with 0.5mm SECC. The chassis supports 3 x 5.25" devices, 1 x FDD (with adaptor) & 4 x 3.5" HDD + 1 x 2.5" SSD. X-Warrior supports long high-end graphics cards up to 400mm which is more than sufficient for those heavy PC users. The cable management holes are pre-drilled on the MB to reduce the cable mess inside chassis. A CPU hole is also pre-drilled on the MB for easy mounting of CPU cooler. The X-Warrior is the best gaming case your money can buy! Key Features • High performance " Mid-Tower" for gamers & enthusiast. • Solidly constructed chassis 0.5mm SECC Japanese Steel. • ALL BLACK interior with "blue" PCI plate & screw-less knobs (Black Edition) or ALL RED interior with “BLACK PCI plate & “RED screw-less knobs (Red Edition) for an unique touch! • Supports longer high-end VGA cards up to 400mm • Supports 3 x 5 1/4", 1 x 3.5" (with adaptor), 1 x 2.5" HDD & maximum 4 x 3.5" HDDs (internal) • " Easy-install" screw-less kits for the 5 1/4" devices • Cable management holes are pre-drilled to reduce cable mess • CPU hole is pre-drilled on the MB plate for ease of CPU cooler assembly • Can install 2x 12cm fan at side panel (optional) / 1x 12cm fan at rear (included) & 2x 12cm fans in front (one fan included) • Bottom PSU position enables PSUs to suck in cold air for better cooling with washable dust filter. • Water-cooling holes are pre-drilled to support water-cooling systems • 2 x USB/ Audio + Mic (AC + HD audio) are easily accessible from the top panel. Case Specifications • Form Factor: Midi Tower • Motherboard Support: ATX, Micro ATX • PSU Support: Standard ATX • Gaming Case: Yes • Water Cooling Ready: Yes • Dimensions: 187mm x 488mm x 520mm (W x H x D) • Packaging Dimensions: 255mm x 535mm x 595mm (W x H x D) • Body
Material: SECC 0.50mm • Front Bezel
Material: ABS Plastic + Mesh • Side Panel: Vented • External Bays: 3 x 5.25” External • 1 x 3.5” External • Internal Bays: 4 x 3.5” Internal • 1 x 2.5” Internal • Drive Bay Notes: • Expansion Slots: 7 x Full Size • Cooling Front: 1 x 12cm BLUE LED fan (included) + 1 x 12cm (optional) • Cooling Top: None • Cooling Rear: 1 x 12cm fan (included) • Cooling Side: 2 x 12cm fan (optional) • Cooling Bottom: None • IO Ports: 2 x USB (Universal Serial Bus) 2.0 • 1 x HD Audio (Also Supports AC97) • 1 x Microphone • Front Bezel
Colour: Black • Body
Colour: Black • System Cabinet
Features: • PSU Included: No • Net Weight (KGs): 6 KGs




...

Product description Ultra thin protective folio case for iPad Air with built-in viewing stand Product Features Ultra thin & lightweight design Openings for camera, buttons etc Extra protection for the corners of your iPad Stand with multiple viewing angles Automatically turns the iPad on/off Magnetic closure Soft inner lining ...

Features AF Multi-Screen Clene With Microfibre Cloth. Suitable for delicate plasma technologies & all computer monitor & laptop screens. Also cleans the screens of PSPs, phones & MP3 players. For best results use the Easy-Clene cloth provided.. ...

CD/DVD Lensclene
- CD ROM Lens Cleaner, 1 Disk Features Disk fitted with microbrushes for cleaning lenses of DVD, CD-ROM, CD-R,
...