About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

8GB 1066MHz DDR3 ECC Reg w/Parity CL7 DIMM Quad Rank x8 w/Therm Sensor
8GB 1066 M Hz DDR3 ECC
Reg W/ Parity CL7 DIMM
Quad Rank X8 W/ Therm
Sensor
£122.03
Kingston technology is the worlds independent memory leader & is well-known for providing high quality memory products at an attractive price. Kingston value ram is your best source for industry-standard memory to maximise the performance & productivity of your system. Built with a-grade components only, Kingston value ram memory modules come with a lifetime warranty. ...
Available
8GB 1333MHz DDR3 CL9 DIMM (Kit of 2) HyperX Fury Series
8GB 1333 M Hz DDR3 CL9
DIMM (Kit Of 2) Hyper X
Fury Series
£29.49
SPECIFICATIONS CL (IDD) 9 cycles Row Cycle Time (t R Cmin) 49.125ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 36ns (min.) Maximum Operating Power TBD W* (per module) UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 667 M Hz f CK for 1333 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), single sided component


...
Available
8GB 1333MHz DDR3 CL9 DIMM (Kit of 2) HyperX Fury White Series
8GB 1333 M Hz DDR3 CL9
DIMM (Kit Of 2) Hyper X
Fury White Series
£58.25
SPECIFICATIONS CL (IDD) 9 cycles Row Cycle Time (t R Cmin) 49.125ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 36ns (min.) Maximum Operating Power TBD W* (per module) UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 667 M Hz f CK for 1333 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), single sided component


...
Available
8GB 1333MHz DDR3 CL9 DIMM HyperX Fury Red Series
8GB 1333 M Hz DDR3 CL9
DIMM Hyper X Fury Red
Series
£32.99
Get in the game with Hyper X FURY. Even newbies get up to speed fast, since FURY automatically recognises its host platform & automatically overclocks to up to 1866 M Hz, providing plenty of power for your next death match. FURY's asymmetric heatspreader design lets you stand out from the crowd. It's available in black, blue, red & -- for the first time in the Hyper X line -- white, with a black PCB. So your rig can reflect your style & you can show it off with pride. It's 100-percent tested & LAN-ready plus it's backed by free technical support. Hyper X Pn P memory will run in most DDR3 systems up to the speed allowed by the manufacturer's system BIOS. Pn P cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Hyper X FURY is available in frequency speeds from 1333 M Hz to 1866 M Hz. Reach faster speeds & higher capacities by just installing the memory, no adjustments in BIOS needed. No matter if you are an Intel or AMD gamer, the Hyper X FURY is ideal for you. To make sure it works, Hyper X FURY has been tested with popular brands of motherboards. Does your system have enough memory to get you into the game? Kits are available to max out your system's memory with up to 16GB of high-performance goodness. ...
Available
8GB 1333MHz DDR3 CL9 DIMM HyperX Fury Series
8GB 1333 M Hz DDR3 CL9
DIMM Hyper X Fury
Series
£43.79
SPECIFICATIONS CL (IDD) 9 cycles Row Cycle Time (t R Cmin) 49.125ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 36ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 667 M Hz f CK for 1333 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), double sided component


...
Available
image missing
8GB 1333 M Hz DDR3 ECC
Reg CL9 DIMM (Kit Of
2) DR X8 W/TS
£80.50
Value RAM is Kingston's value-priced line of industry-standard, generic memory intended for customers who have white box or ...
Available
8gb 1333mhz Ddr3 Non Ecc Cl9 Dimm Kit Of 2 Hyperx Blu Memory
8gb 1333mhz Ddr 3 Non
Ecc Cl 9 Dimm Kit Of 2
Hyperx Blu Memory
£90.50
DDR3 is the third generation of Double Data Rate (DDR) SDRAM memory. Similar to DDR2, it is a continuing evolution of DDR memory technology that delivers higher speeds (up to 1600 MHz), lower power consumption & heat dissipation. It is an ideal memory solution for bandwidth hungry systems equipped with dual & quad core processors & the lower power consumption is a perfect match for both server & mobile platforms. Dual In line Memory Modules, or DIMMs, closely resemble SIMMs. Like SIMMs, most DIMMs install vertically into expansion sockets. The principal difference between the two is that on a SIMM, pins on opposite sides of the board are tied together to form one electrical contact; on a DIMM, opposing pins remain electrically isolated to form two separate contacts. ...
Available
8GB 1333MHz DDR3L ECC Reg CL9 DIMM SR x4 1.35V w/TS
8GB 1333 M Hz DDR3L ECC
Reg CL9 DIMM SR X4
1.35V W/TS
£45.34
Value RAM is Kingston's value-priced line of industry-standard, generic memory intended for customers who have white box or ...
Available
8GB 1600MHz DDR3 CL10 DIMM (Kit of 2) HyperX Fury Red Series
8GB 1600 M Hz DDR3 CL10
DIMM (Kit Of 2) Hyper X
Fury Red Series
£45.48
SPECIFICATIONS CL (IDD) 10 cycles Row Cycle Time (t R Cmin) 48.125ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 37.5ns (min.) Maximum Operating Power TBD W* (per module) UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 800 M Hz f CK for 1600 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), single sided component


...
Available
8GB 1600MHz DDR3 CL10 DIMM (Kit of 2) HyperX Fury White Series
8GB 1600 M Hz DDR3 CL10
DIMM (Kit Of 2) Hyper X
Fury White Series
£34.24
SPECIFICATIONS CL (IDD) 10 cycles Row Cycle Time (t R Cmin) 48.125ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 37.5ns (min.) Maximum Operating Power TBD W* (per module) UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 800 M Hz f CK for 1600 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), single sided component


...
Available

8GB 1333MHz DDR3 CL9 DIMM HyperX Fury White Series

Get in the game with HyperX FURY. Even newbies get up to speed fast, since FURY automatically recognises its host platform and automatically overclocks to up to 1866MHz, providing plenty of power for your next death match. FURY's asymmetric heatspreader design lets you stand out from the crowd. It's available in black, blue, red and -- for the first time in the HyperX line -- white, with a black PCB. So your rig can reflect your style and you can show it off with pride. It's 100-percent tested and LAN-ready plus it's backed by free technical support. HyperX PnP memory will run in most DDR3 systems up to the speed allowed by the manufacturer's system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. HyperX FURY is available in
frequency speeds from 1333MHz to 1866MHz. Reach faster speeds and higher capacities by just installing the memory, no adjustments in BIOS needed. No matter if you are an Intel or AMD gamer, the HyperX FURY is ideal for you. To make sure it works, HyperX FURY has been tested with popular brands of motherboards. Does your system have enough memory to get you into the game? Kits are available to max out your system's memory with up to 16GB of high-performance goodness.
Buy
Availability: In Stock
£61.16
B2B_2
Description Reviews / Comments Add New

Product Description

Get in the game with Hyper X FURY. Even newbies get up to speed fast, since FURY automatically recognises its host platform & automatically overclocks to up to 1866 M Hz, providing plenty of power for your next death match. FURY's asymmetric heatspreader design lets you stand out from the crowd. It's available in black, blue, red & -- for the first time in the Hyper X line -- white, with a black PCB. So your rig can reflect your style & you can show it off with pride. It's 100-percent tested & LAN-ready plus it's backed by free technical support. Hyper X Pn P memory will run in most DDR3 systems up to the speed allowed by the manufacturer's system BIOS. Pn P cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Hyper X FURY is available in frequency speeds from 1333 M Hz to 1866 M Hz. Reach faster speeds & higher capacities by just installing the memory, no adjustments in BIOS needed. No matter if you are an Intel or AMD gamer, the Hyper X FURY is ideal for you. To make sure it works, Hyper X FURY has been tested with popular brands of motherboards. Does your system have enough memory to get you into the game? Kits are available to max out your system's memory with up to 16GB of high-performance goodness.

Reviews/Comments

Add New

Intelligent Comparison

Available
8GB 1333MHz DDR3 CL9 DIMM HyperX Fury Red Series
8GB 1333MHz DDR3 CL9 DIMM HyperX Fury Red Series Ebuyer Business
£32.99
Available
8GB 1333MHz DDR3 CL9 DIMM HyperX Fury Series
8GB 1333MHz DDR3 CL9 DIMM HyperX Fury Series Ebuyer Business
£43.79
Available
4GB 1333MHz DDR3 CL9 DIMM HyperX Fury Red Series
4GB 1333MHz DDR3 CL9 DIMM HyperX Fury Red Series Ebuyer Business
£17.49
Available
8GB 1600MHz DDR3 CL10 DIMM HyperX Fury White Series
8GB 1600MHz DDR3 CL10 DIMM HyperX Fury White Series Ebuyer Business
£29.49
Available
8GB 1333MHz DDR3 CL9 DIMM (Kit of 2) HyperX Fury White Series
8GB 1333MHz DDR3 CL9 DIMM (Kit Of 2) HyperX Fury White Series Ebuyer Business
£58.25
Available
4GB 1866MHz DDR3 CL10 DIMM HyperX Fury White Series
4GB 1866MHz DDR3 CL10 DIMM HyperX Fury White Series Ebuyer Business
£20.36
Available
8GB 1333MHz DDR3 CL9 DIMM (Kit of 2) HyperX Fury Series
8GB 1333MHz DDR3 CL9 DIMM (Kit Of 2) HyperX Fury Series Ebuyer Business
£29.49
Available
image missing
4GB 1866MHz DDR3 CL10 DIMM HyperX Fury Red Series Ebuyer Business
£18.41

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

LAN - Local Area Network
PCB - Printed Circuit Board
DIMM - Dual In-Line Memory Module
Black - A colour which does not emit any colour of the spectrum. Black absorbs all frequencies of the spectrum.
White - A colour combining all colours
Frequency - A term used to describe how often something is done
Frequency - A wave frequency is the number of times a wave repeats within a given time
Blue - A primary colour
Red - One of the three primary colours
Intel - World leaders in silicon chip development and manufacture. Chips for Laptops, desktops and mobile devices. Their main competitor is AMD (Advanced Micro Devices)
AMD - Advanced Micro Devices. A silicon chip manufacturer for desktop, laptop and mobile devices. Also owners of ATI a leading graphics processor chip manufacturer
speed - A measurement of how fast an object travels between two points
Popular - Something that is admired and liked by many people.
technical - Something that relates to a good level of skill and methods.
Design - A drawing or styles that shows the look and functionality of something before its made.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Memory - A way to describe the way in which the brain can remember things.
Ideal - Something that satisfies a perfect criteria.

Supplier Information

Ebuyer Business
Get ready to power up your tech game with Ebuyer (https://www.ebuyer.com/)! Explore a vast selection of the latest gadgets, electronics, and computing essentials at unbeatable prices. From cutting-edge laptops and gaming PCs to home appliances and office supplies, we've got everything you need to stay connected and productive. With fast delivery and top-notch customer service, Ebuyer is your go-to destination for all things tech. Don't settle for less – shop now and take your tech game to the next level with Ebuyer!
Page Updated: 2024-02-28 09:26:27

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu