3D Printer Pen Three-Dimensional Painting Drawing for Gift Product parameters:
Material: plastic shell Drawing pen Appearance
Colour: gray Drawing pen
Size: 18.5 * 4.5 * 3CM Supplies length: 3 meters (about) Diameter: 1.75MM (approx) Single weight: 63g Discharge method: hot melt extrusion pile forming Forming method: three-dimensional molding Print range: Unlimited Heating temperature: 160 ° C -230 ° C adjustable range Print speed: adjustable Printing supplies: ABS 1.75mm Equipment operating voltage: 12V 2A Nozzle diameter: 0.7mm Power specifications: British regulations Input voltage: 100-240V Instructions: 1. Plug the power adapter AC power cord into the mains socket & the other end of the DC plug into the power jack at the end of the pen. The power indicator lights the orange light to indicate that the device is powered on & enters the standby servo. 2. Click the Feed button & the red LED will light to indicate that the device has entered the warm-up state after about 0.5-2 minutes. When the red LED lights from red to green indicating that the end of warm the device can be normal operation. 3. Put the supplies into the end of the pen supplies into the hole the other hand long press the wire button then the supplies will be transported by the device built-in motor to be tip tip nozzle material spit out that is loaded successfully. 4. Creation 5. Do not touch the nozzle & heating parts during use. 6. When the device is not used for more than 5 minutes but automatically enter the sleep standby state then work indicator goes out if you want to use again need to click the wire button to release. 7. If you need to retreat or replace the supplies please repeat (2) & then long press the button can be 3D print pen * 1 Supplies * 1 package (3 rolls) British regulation power supply * 1 English manual * 1 Original packaging