Features: Universal hot shoe interface compatible with Canon Nikon Sigma Olympus Pentax etc. Globally univeral 433 Mhz frequency 4 channels. With studio flash interface can trigger several kinds of studio flashes. Transmitting distance up to 30M no limits with directions or angles. 1/4 nut design to be connected with tripod for stable flashlight. Speedy frequency regulation convinient for photographers to shoot. Energy-saving design with 12V 23A battery of transmitter & 2 AAA batteries (not included) of receiver. Comes with a PC sync cord for cameras without hot shoe socket. Note: This trigger can not work on TTL mode. How to use: 1. Insert the transmitters hot shoe socket into your cameras hot shoe jack plug the flash onto the receiver switch ON the receiver. Make sure the channel selector of both transmitter & receiver at same channel. Press the Test button on the transmitter to test before shooting. 2. If your camera has not hot shoe socket for connecting the transmitter you can connect the transmitter to the camera by the PC Sync Cord provided. (only the old camera needed). 3. You can trigger both the flashgun & studio lights with this flash trigger. If you use the receiver on big studio strobe flashlight or AC slave flash you can just connect the receiver to the studio strobe flashlight with 3.5mm or 6.35mm jack plug PC Sync cord (not included). Compatible with: * Canon Speed Lite 580EX II 580EX 550EX 540EZ 520EZ 430EX/EXII 430EZ 420EX 420EZ 380EX; * Nikon Speed Light SB-900 SB-800 SB-600 SB-28 SB-27 SB-26 SB-25 SB-24; * Olympus FL-50 FL36; * Pentax AF-540 FGZ AF-360 FGZ AF-400 FT AF-240 FT; * Sunpak Auto 2000DZ 622 Pro 433AF 433D 383 355 A Fm 344D 333D; * Vivitar 285HV (Older Vivitar 285/283 works only with PC sync cord); * Other flash models with a trigger voltage of 12V or lower. * Work with flash units using universal hot shoe like Nikon Sigma Olympus Pentax (except Minolta SONY for they use a special hot shoe). Specifications: Power of transmitter: 23A 12V mini battery (included about one year lifetime) Power of the receiver (AC): 2 * 1.5V AAA Alkaline Battery (not included) Outdoor working distance: max. 30m / 90feet (open area no fraise) Indoor operating distance: max. 25m / 75feet Channel: 4 channels Frequency: 433 Mhz Synchronous speed: Max. 1/250sec Umbrella socket: approx. 0.8cm / 0.24in
Colour: black
Material: metal + plastic 1 x Transmitter 2 x Receiver 1 x PC Sync Cord 1 x User Manual