Use tormek woodturning jigs on a conventional bench grinder. Benefit from the fast steel removal of the bench grinder. shape your tools quickly & precisely. use the tormek whetstone to refine & hone the edge. exact profiles repeatable time after time. There is distinction between shaping & sharpening. once the tool is shaped, you just want to touch up the edge, never removing more steel than necessary. the time consuming initial shaping is now possible using a bench grinder in conjunction with the tormek bgm-100 mounting set as it can be done faster on a bench grinder than on the tormek whetstone system. With the bgm-100 you can use your tormek jigs & setting devices on a bench grinder, giving you perfect control & making the transfer to your tormek for final finishing simple. the shape & edge angle are precisely repeatable even when you move onto the larger diameter wheel of a tormek machine. This means you can benefit from the fast steel removal of the bench grinder & get the finest surface on the water-cooled grindstone & the leather-honing wheel. The bgm-100 also allows the use of other tormek woodturners jigs in combination with a bench grinder such as the svs-50 multi-jig & svd-110 toolrest. the bgm-100 comprises a horizontal base, a tormek universal tool support, fixing kit & complete instructions. ...

It is extremely hard to correctly sharpen a drill bit by h&. this drill bit sharpener from tormek makes it possible to sharpen drill bits on your tormek water cooled sharpening system with the highest precision. unlike conventional drill bit sharpeners, tormek sharpens with water cooling which is gentle on the steel. overheating of the steel is usually not noticeable, but the consequences are that the drill will dull rapidly & may even break. The attachment can be set at any point angle between 90 deg & 150 deg & at four different clearance angles. this flexibility enables you to give the drill the geometry that works best for each drilling operation. ...

It is extremely hard to correctly sharpen a drill bit by h&. This drill bit sharpener from Tormek makes it possible to sharpen drill bits on your Tormek Water Cooled Sharpening System with the highest precision. Unlike conventional drill bit sharpeners, Tormek sharpens with water cooling which is gentle on the steel. Overheating of the steel is usually not noticeable, but the consequences are that the drill will dull rapidly & may even break. ...

The tormek instruction box, which contains a 1 hour 20 minutes dvd film & a handbook shows you how to shape & sharpen all your turning tools. the film is made by jeff farris, a highly experienced usa woodturning instructor & the handbook is written by torgny jansson, the inventor of the tormek sharpening system. In the film jeff farris puts focus on the most important tools – which also are the most difficult to sharpen – the spindle gouge, the bowl gouge & the skew. you can watch him shape an edge to his favourite profile & see how quickly it is re-sharpened once the setting is done. The hand book clearly describes the whole system & its possibilities. numerous line drawings show step by step how to shape & sharpen your tools. repeatability is the core word & the book explains three efficient methods for how to best replicate an edge profile. ...

Tormek have developed a new profiled leather honing wheel, la-120 with special benefits. The leather discs are exchangeable so you can easily replace a disc with a worn tip. discs with alternative, narrower profiles are also available as an optional extra. ...

The tormek blackstone silicon sb-250 is designed for hard materials & fast sharpening. it offers fast steel removal on hss & exotic alloys & can touch up tungsten carbide. the key to removing material efficiently at low rpm is very sharp grains with high hardness & relatively fine grit size. the sb-250 is made in the same grit size as the original tormek grindstone & can be graded with the stone grader for fast material removal or fine surface finish. Model: sb-250
bore: 12mm
diameter: 250mm (10")
grit: 220g

Width: 50mm (2")
..





...

The Tormek Blackstone silicon SB-250 is designed for hard materials & fast sharpening. It offers fast steel removal on HSS & exotic alloys & can touch up tungsten carbide. The key to removing material efficiently at low rpm is very sharp grains with high hardness & relatively fine grit size. The SB-250 is made in the same grit size as the original Tormek grindstone & can be graded with the stone grader for fast material removal or fine surface finish. ...