Extra long, they are hardened & tempered with a knurled grip. the drive pin sections are 90mm (3 1/2 inch) long & the diameters of the punches are slightly under the sizes listed. Length: 200mm / 8 inch
set of all sizes in case: (3mm / 1/8 inch, 5mm / 3/16 inch, 6mm / 1/4 inch, 8mm / 5/16 inch, 9.5mm / 3/8 inch).
...

Especially adaptable for delicate work. the revolving heads are concave & hexagonal for sensitive control. blades are hardened & tempered. overall length of screwdrivers are Approx. 95mm (3 3/4 inch). Set of seven in a case: 0.6mm (0.025 inch), 1mm (0.040 inch), 1.4mm (0.055 inch), 1.8mm (0.070 inch), 2mm (0.080 inch), 2.5mm (0.100 inch) & phillips blade no. 0. ...

Well proportioned, hardened & tempered with knurled finger grip. Set of all

Sizes: (1.5mm (1/16 inch), 2.5mm

...

Handles are rigidly attached to the contact plungers & are automatically self-centering. constant spring tension provides uniform contact pressure & both plungers are easily locked at any desired setting. Range: handle length:
8
- 13mm (5/16
- 1/2 inch) 60mm (2 3/8 inch)
13
- 19mm (1/2
- 3/4 inch) 60mm (2 3/8 inch)
19
- 32mm (3/4
- 1 1/4 inch) 60mm (2 3/8 inch)
32
- 54mm (1 1/4
- 2 1/8 inch) 60mm (2 3/8 inch)
54
- 89mm (2 1/8
- 3 1/2 inch) 60mm (2 3/8 inch)
89
- 150mm (3 1/2
- 6 inch) 82mm (3 1/4 inch).

















...

The four different attachments adapt to countless applications & are readily interchangeable being clamped by a ball swivel-joint, which permits adjustment to an angular position or true concentricity. working centres & adges can be quickly & accurately located, including confined areas such as slots or shallow holes. with starrett last word test indicators, the user can check run-out or concentricity, establish centre distances & check straightness or alignment of flat surfaces. Centre finder with pointed shank, ball contact, disc contact & offset indicator holder in case. ...

Starrett bi-metal holesaws are constructed of hardened, heat & abrasion resisting high speed steel teeth with a tough alloy body & cap. This gives them exceptional strength, durability & shatter resistance for user safety.
they will cut any wood, metal or plastic in either a h&-held drill or a drill press.
max. cutting depth. 38mm.
size.19mm 3/4 inch
arbors to suit (available separately)
code holesaw size shank
stra 1 14-30 mm 11/32in (8.75mm) hex
stra 4 14-30 mm 1/4 in (6.50mm) round.






...

Starrett bi-metal holesaws are constructed of hardened, heat & abrasion resisting high speed steel teeth with a tough alloy body & cap. This gives them exceptional strength, durability & shatter resistance for user safety.
they will cut any wood, metal or plastic in either a h&-held drill or a drill press.
max. cutting depth. 38mm.
size.16mm 5/8 inch
arbors to suit (available separately)
code holesaw size shank
stra 1 14-30 mm 11/32in (8.75mm) hex
stra 4 14-30 mm 1/4 in (6.50mm) round.






...

Starrett bi-metal holesaws are constructed of hardened, heat & abrasion resisting high speed steel teeth with a tough alloy body & cap. This gives them exceptional strength, durability & shatter resistance for user safety.
they will cut any wood, metal or plastic in either a h&-held drill or a drill press.
max. cutting depth. 38mm.
size.22mm 7/8 inch
arbors to suit (available separately)
code holesaw size shank
stra 1 14-30 mm 11/32in (8.75mm) hex
stra 4 14-30 mm 1/4 in (6.50mm) round.






...