About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

image missing
Robert Sorby 830H ¼"
Standard Parting Tool
Handled
£30.70
Used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The 1/8" tool reduces the amount of waste, vital if the timber is an expensive, exotic one. It also makes for a fine detailing tool, e.g. beads & fillets. Length: 17". ...
Archived Product
image missing
Robert Sorby 830SH
Slim Parting Tool
1/16"
£19.29
This 1/16" handy parting tool is designed to give the cleanest & finest of cuts with the minimum of waste wood. Its 1¼" blade width eliminates the flexing & twisting normally associated with such a thin blade. The double bevel hss cutting face gives the very finest of cuts. & for added security the blade is seated & riveted deep in the handle. Length 10½". ...
Archived Product
image missing
Robert Sorby 831H
3/16" Diamond Section
Parting Tool Blade
Only
£38.79
Robert sorby 831h 3/16" diamond section parting tool blade only. the special profile of this tool reduces the risk of binding in the cut. It also reduces the amount of heat build up caused by friction. This lessens the chance of burning the bottom of the parted off projet. Length: 17". ...
Archived Product
image missing
Robert Sorby 831H
3/16" Diamond Section
Parting Tool Handled
£45.95
Robert sorby 831h 3/16" diamond section parting tool handled. the special profile of this tool reduces the risk of binding in the cut. It also reduces the amount of heat build up caused by friction. This lessens the chance of burning the bottom of the parted off projet. Length: 17". ...
Archived Product
image missing
Robert Sorby 832H
1/16" Fluted Parting
Tools Blade Only
£29.59
Robert sorby 832h 1/16" fluted parting tools blade only. this features a radically new & unique cutting profile with a blade profile of only 2mm. The long bevel has a milled flute which is the cutting face. The small bevel is the sharpening face. When parting off this unique arrangement causes the tip to always cut at a shear cutting angle of 45 degrees. This produces a finish without equal from a parting tool, virtually eliminating the need for sanding. Length 18½". ...
Archived Product
image missing
Robert Sorby 832H
3/16" Fluted Parting
Tool Blade Only
£40.95
Robert sorby 832h 3/16" fluted parting tool blade only. this tool has a milled flute running along the bottom edge, reating 2 sharp spurs at the cutting face. These sever the fibres to produce a burnished finish. The tapered profile also reduces the risk of binding in the cut. Length 18½". ...
Archived Product
image missing
Robert Sorby 832H
3/16" Fluted Parting
Tool Handled
£49.99
Robert sorby 832h 3/16" fluted parting tool handled. this tool has a milled flute running along the bottom edge, reating 2 sharp spurs at the cutting face. These sever the fibres to produce a burnished finish. The tapered profile also reduces the risk of binding in the cut. Length 18½". ...
Archived Product

Robert Sorby 832H 1/16" Fluted Parting Tools Handled

Robert sorby 832h 1/16" fluted parting tools handled. this features a radically new & unique cutting profile with a blade profile of only 2mm. The long bevel has a milled flute which is the cutting face. The small bevel is the sharpening face. When parting off this unique arrangement causes the tip to always cut at a shear cutting angle of 45 degrees. This produces a finish without equal from a parting tool, virtually eliminating the need for sanding. Length 18½".
RIP - This product is no longer available on our network. It was last seen on 29.10.2011

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: DIY Tools
  • SKU: 6546
Availability: In Stock
£38.79
chisels DIY > Tools & Electrical Tools > Cabinet Making > Chisels
Description Reviews / Comments Add New

Product Description

Robert sorby 832h 1/16" fluted parting tools handled. this features a radically new & unique cutting profile with a blade profile of only 2mm. The long bevel has a milled flute which is the cutting face. The small bevel is the sharpening face. When parting off this unique arrangement causes the tip to always cut at a shear cutting angle of 45 degrees. This produces a finish without equal from a parting tool, virtually eliminating the need for sanding. Length 18½".

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Oooops!
We couldn't find any historical pricing!

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

blade - A flat part of a device which usually has a cutting edge
cutting - The seperation of an object usually using a cutting tool such as a knife
Small - something that takes up less space than normal.
Flute - A long silver instrument with buttons to press to make different notes.

Supplier Information

DIY Tools
Established in 2000 and now on of the fastest growing home and garden etailers.

Providing a wide range of power tools, hand tools, garden equipment and diy tools

DIY Tools Delivery
Page Updated: 2013-03-09 03:03:17

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu