These perfectly balanced bowl gouges are ideal for all aspects of bowl & goblet turning whether on the internal or external faces of the workpiece. Fitted with a 16in handle & 9 1d 4in blade it is easy to achieve the required sweep, even when taking heavy cuts to hollow out the centre of a bowl for example.
the very solid section of hss minimises chatter & vibration.
...

These perfectly balanced bowl gouges from record power are ideal for all aspects of bowl & goblet turning whether on the internal or external faces of the workpiece. The very solid section of hss minimises chatter & vibration.

fitted with a 16 inch wooden handle & 9 inch long x 1/2 inch hardened blade. 
.


...

These perfectly balanced bowl gouges from record power are ideal for all aspects of bowl & goblet turning whether on the internal or external faces of the workpiece. The very solid section of hss minimises chatter & vibration.

fitted with a 16 inch wooden handle & 9 inch long x 3/8 inch hardened blade.
.


...

A versatile popular form of chucking, from the most delicate goblets up to 12 inch wet wood bowls, the wood screw chuck offers a simple safe timber holding solution. Consisting of seven precision machined components, this chuck incorporates the unique non-slip screw mechanism which guarantees re-alignment of the timber once removed, thus giving the facility to turn both kiln & wet timbers.
this type of chuck is commonly used by specialist green woodturners on out of balance workpieces. as a general rule on a screw chuck you can turn five times the diameter of the chuck face therfore this chuck is suitable for timber 12 inch wide. an ideal chucking solution for turning goblets, egg cups & fruit etc. for use on any lathe with a 3/4 x 16tpi spindle.
...

Manufactured from grey iron castings, this 4in faceplate is individually machined on external faces to a tolerances of 1/1000th of an inch. eight countersunk location holes are goemetrically located to ensure optimum holding position. woodscrews are not supplied, however we recommend the use of no. 14 countersink screws, length of screw will vary depending on application. the cwa 70 faceplate is suitable for bowls up to 16in for use on any lathe with a 3/4 x 16tpi spindle. ...

The cwa 93 is a revolving centre designed for turning in between centres, but unlike traditional dead centres the revolving action of the cwa 93 eliminates scorching of the timber. machine ground on internal & external faces, the ‘sealed for life’ single bearing resists sideways & downward thrust pressures to enable out of balance timbers to be worked on without preparation. ...