A quick & easy way to cut out clean holes in sheet metal up to 16 gauge. Special design allows even load during the cutting & produces a burr free hole that needs no extra finishing.
heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.
all punches are sold singly without key, which should be ordered separately.
thread the punch onto the allen screw & then pass the allen screw through the hole. position the die on top of the die nut & then screw the die nut onto the projecting allen screw until it touches the metal sheet. use an allen key to turn the allen screw. the screw will pull the punch through the metal & a hole will result.
please note these instructions apply to cutters up to 15mm in size, for cutters 15mm & over have a different configuration. notably they have fewer components, in the larger cutters the thread is in the punch & thus there is no die nut.
size.70.0mm.
key type.me. 14mm.





...

A quick & easy way to cut out clean holes in sheet metal up to 16 gauge. Special design allows even load during the cutting & produces a burr free hole that needs no extra finishing.
heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.
all punches are sold singly without key, which should be ordered separately.
thread the punch onto the allen screw & then pass the allen screw through the hole. position the die on top of the die nut & then screw the die nut onto the projecting allen screw until it touches the metal sheet. use an allen key to turn the allen screw. the screw will pull the punch through the metal & a hole will result.
please note these instructions apply to cutters up to 15mm in size, for cutters 15mm & over have a different configuration. notably they have fewer components, in the larger cutters the thread is in the punch & thus there is no die nut.
size.75.0mm.
key type. me.14mm.





...

A quick & easy way to cut out clean holes in sheet metal up to 16 gauge. Special design allows even load during the cutting & produces a burr free hole that needs no extra finishing.
heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.
all punches are sold singly without key, which should be ordered separately.
thread the punch onto the allen screw & then pass the allen screw through the hole. position the die on top of the die nut & then screw the die nut onto the projecting allen screw until it touches the metal sheet. use an allen key to turn the allen screw. the screw will pull the punch through the metal & a hole will result.
please note these instructions apply to cutters up to 15mm in size, for cutters 15mm & over have a different configuration. notably they have fewer components, in the larger cutters the thread is in the punch & thus there is no die nut.
size.76.5mm.
key type. me. 14mm.





...

A quick & easy way to cut out clean holes in sheet metal up to 16 gauge. Special design allows even load during the cutting & produces a burr free hole that needs no extra finishing.
heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.
all punches are sold singly without key, which should be ordered separately.
thread the punch onto the allen screw & then pass the allen screw through the hole. position the die on top of the die nut & then screw the die nut onto the projecting allen screw until it touches the metal sheet. use an allen key to turn the allen screw. the screw will pull the punch through the metal & a hole will result.
please note these instructions apply to cutters up to 15mm in size, for cutters 15mm & over have a different configuration. notably they have fewer components, in the larger cutters the thread is in the punch & thus there is no die nut.
size.80.0mm.
key type.me. 14mm.





...

A quick & easy way to cut out clean holes in sheet metal up to 16 gauge. Special design allows even load during the cutting & produces a burr free hole that needs no extra finishing.
heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.
all punches boxed singly without key, which should be ordered separately.

to use these punches they require a hole to be drilled through the sheet metal (large enough to clear the allen screw) then the die & allen screw are threaded through the sheet metal then onto the die nut & screw die nut. when the allen screw is tightened the punch will cut cleanly & evenly through the metal.
size.9/16in.
key type. a. 7/32in af.





...

A quick & easy way to cut out clean holes in sheet metal up to 16 gauge. Special design allows even load during the cutting & produces a burr free hole that needs no extra finishing.
heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.
all punches boxed singly without spanner, which should be ordered separately.
size.19.0mm.square.
spanner operated 5/8in af.



...

A quick & easy way to cut out clean holes in sheet metal up to 16 gauge. Special design allows even load during the cutting & produces a burr free hole that needs no extra finishing.
heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.
all punches boxed singly without spanner, which should be ordered separately.
size.25.4mm.square.
key type. b key operated. 5/16in.



...

A quick & easy way to cut out clean holes in sheet metal up to 16 gauge. Special design allows even load during the cutting & produces a burr free hole that needs no extra finishing.
heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.
all punches boxed singly without spanner, which should be ordered separately.
size.3/4in square.
spanner operated. 5/8in af.



...