Everbuild rapid set flexiplus is a rapid setting ceramic tile adhesive with added latex powder for enhanced flexibility. rapid set flexiplus is used for bonding ceramic tiles to prepared floors & walls without the need for a separate flexible additive. can be used internally & externally & bonds to most building substrates such as concrete, cement screeds & render, timber, existing ceramic tiles, dense blockwork & unskimmed plasterboard. conforms to bs 5980 as a type 1 class aa adhesive; i.e. the adhesive is fully water-resistant. Surfaces/ preparation
concrete/screeds/renders/unskimmed plasterboard/blockwork- allow fresh concrete etc to dry for at least 4 weeks before tiling. ensure floors are free from rising damp. prime surfaces with everbuild pva bond diluted 4 parts water to 1 part pva bond & allow to dry.
timber floors
- suitable for interior timber floors only. ensure adequate ventilation beneath floors. cover wooden floors with moisture resistant exterior grade (marine) plywood, which must be at least 12mm thick. secure with screws, not nails, at 300mm centers. prime with everbuild pva bond diluted 3 parts water to 1 part pva bond & allow to dry.
softwood tongue & groove boarding- boards must be screwed (not nailed) down to joists at 300mm centers & surfaces sealed with everbuild pva bond diluted 3 parts water to 1 part pva bond & allowed to dry.
existing tiling. ensure tiles are securely bonded to wall or floor. roughen surface of glazed tiles with sander. apply a bonding coat of neat everbuild pva bond. apply mixed adhesive whilst bonding coat is still tacky.




...

Everbuild rapid set tile mortar is a cement-based polymer modified powdered tile adhesive with rapid setting properties, specifically designed for same day fixing & grouting of ceramic floor tiles.
- rapid set
- same day fixing & grouting.
- internal/external use.
- excellent water resistance.
- extremely high bond strength
- over double the bs minimum requirement in wet shear (7 days drying, 7 days water immersion followed by shearing whilst wet.)
- for securing floor & wall tiles to most surfaces
- for heavy-duty areas such as heavily walked floors
- recommended for tiling domestic, communal & power showers.
- suitable for constant immersion e.g. swimming pools.
- may also be used for patching small areas in concrete/stone etc.










...

Everbuild rapid set tile mortar is a cement-based polymer modified powdered tile adhesive with rapid setting properties, specifically designed for same day fixing & grouting of ceramic floor tiles.
- rapid set
- same day fixing & grouting.
- internal/external use.
- excellent water resistance.
- extremely high bond strength
- over double the bs minimum requirement in wet shear (7 days drying, 7 days water immersion followed by shearing whilst wet.)
- for securing floor & wall tiles to most surfaces
- for heavy-duty areas such as heavily walked floors
- recommended for tiling domestic, communal & power showers.
- suitable for constant immersion e.g. swimming pools.
- may also be used for patching small areas in concrete/stone etc.










...

Ready Mixed Wallcovering Adhesive is a ready mixed paste suitable for hanging all wall coverings including sculptured, blown & textured vinyl, washable & heavily embossed wallpapers. This product has a high initial tack combined with excellent adjustability for accurate positioning. ...

Ren-o-block is a pigmented solvent based acrylic coating designed to restore colour to faded, tired & soiled block paving & other mineral flags/pavers. Ren-o-block is available in 3 colour types that have been carefully blended to suit the most popular block paving colours:-
-brick red / brindle
-buff / sandstone
-charcoal / anthracite
over time weathering, u.v light & traffic gradually fade the surface colour of block paving, ren-o-block has been specifically developed to restore block paving colour like new whilst retaining the natural 'patina' of the block paver.
using translucent pigments that are absorbed deep into the block paver, whilst allowing the surface texture to show through, ren-o-block uniquely restores depth of colour in just one coat.
ren-o-block finishes to a mid sheen, non-slip finish that provides a long lasting seal (minimum 5 years) which is resistant to sunlight, water, oil & petrol, contains a fungicide to resist mould growth.
-restores natural colour to block paving.
-long lasting non-slip finish.
-helps facilitate easier cleaning.
-block paved drives & pathways.
- mineral flags & pavers.










...

Ren-o-block is a pigmented solvent based acrylic coating designed to restore colour to faded, tired & soiled block paving & other mineral flags/pavers. Ren-o-block is available in 3 colour types that have been carefully blended to suit the most popular block paving colours:-
-brick red / brindle
-buff / sandstone
-charcoal / anthracite
over time weathering, u.v light & traffic gradually fade the surface colour of block paving, ren-o-block has been specifically developed to restore block paving colour like new whilst retaining the natural 'patina' of the block paver.
using translucent pigments that are absorbed deep into the block paver, whilst allowing the surface texture to show through, ren-o-block uniquely restores depth of colour in just one coat.
ren-o-block finishes to a mid sheen, non-slip finish that provides a long lasting seal (minimum 5 years) which is resistant to sunlight, water, oil & petrol, contains a fungicide to resist mould growth.
-restores natural colour to block paving.
-long lasting non-slip finish.
-helps facilitate easier cleaning.
-block paved drives & pathways.
- mineral flags & pavers.










...

Ren-o-block is a pigmented solvent based acrylic coating designed to restore colour to faded, tired & soiled block paving & other mineral flags/pavers. Ren-o-block is available in 3 colour types that have been carefully blended to suit the most popular block paving colours:-
-brick red / brindle
-buff / sandstone
-charcoal / anthracite
over time weathering, u.v light & traffic gradually fade the surface colour of block paving, ren-o-block has been specifically developed to restore block paving colour like new whilst retaining the natural 'patina' of the block paver.
using translucent pigments that are absorbed deep into the block paver, whilst allowing the surface texture to show through, ren-o-block uniquely restores depth of colour in just one coat.
ren-o-block finishes to a mid sheen, non-slip finish that provides a long lasting seal (minimum 5 years) which is resistant to sunlight, water, oil & petrol, contains a fungicide to resist mould growth.
-restores natural colour to block paving.
-long lasting non-slip finish.
-helps facilitate easier cleaning.
-block paved drives & pathways.
- mineral flags & pavers.










...