Plastic see-through dispenser for merchandising draper watering system hose connectors. Comprises dispenser with three compartments each holding 36 connectors with dividers that can be removed (to create a single chamber) & a base tray where customers take the product. Six stick on pricing labels are included with each dispenser as is a handy laminated epos scanning card for use at the till which shows each connector‘s bar code. Replenishment connectors can be ordered by"ing the stock numbers in the table below. Dispenser dimensions: 300 x 225 x 285mm (approx.). Carton packed. Contents. 68571 (equiv. Carded stock no. 55196), 36 x 1/2“ plastic hose connector stock no. 68569 (equiv. Carded stock no. 55197) & 36 x 1/2“ plastic hose repair connector stock no. 77792 (equiv. Carded stock no. 55195) weight: 0.02kg. ...

Plastic see-through dispenser for merchandising draper watering system hose connectors. Comprises dispenser with three compartments each holding 36 connectors with dividers that can be removed (to create a single chamber) & a base tray where customers take the product. Six stick on pricing labels are included with each dispenser as is a handy laminated epos scanning card for use at the till which shows each connector‘s bar code. Replenishment connectors can be ordered by"ing the stock numbers in the table below. Dispenser dimensions: 300 x 225 x 285mm (approx.). Carton packed. Contents. 68571 (equiv. Carded stock no. 55196), 36 x 1/2“ plastic hose connector stock no. 68569 (equiv. Carded stock no. 55197) & 36 x 1/2“ plastic hose repair connector stock no. 77792 (equiv. Carded stock no. 55195) weight: 0.02kg. ...

1/2" square drive 0
- 21kg/m or 0
- 150lb-ft powerset torque wrench. Dual scale for forward/reverse operations. wrench uses

...

Reversible ratchet head. The lb-ft & nm scale is engraved on the barrel of the wrench. The micrometer type sleeve allows accurate preset torque values to be set. When torque is reached the wrench produces an audible click & a release of tension. Marked range: 30-210nm/22.1-154.9lb-ft. Overall length 475mm. Supplied in blow mould storage case. Weight: 1.63kg. ...

5 piece, 1/2“square drive drive. Xzn bit set expert quality, xzn bits manufactured from sncm-v steel hardened & tempered with ...

1/2“sq. drive. Air impact wrench general duty impact wrench with one hand forward & reverse direction change. Built-in four position power regulator for simple speed & power control. Display carton. specification:. Rocking dog. 16mm. 250lb-ft (34.58kg/m). 90psi (6.2bar). 4.0cfm (114l/min). 3/8“ i.d. 1/4“ bsp. 2.4kg. ...

Workshop quality low noise, low vibration high torque twin hammer action with easy forward & reverse one-hand operation. low noise & vibration with rotating air inlet to prevent air lines tangling. the composite body makes this a lightweight but rugged tool that reduces operator fatigue & the 'cold sink' effect i.e overcooling of the tool's body by the compressed airflow. ergonomic handle design for user comfort. display carton. Weight: 2.52kg. Specification. Ultimate torque   ...   600lb-ft (82.98kg/m). Free speed   ...   7000rpm. Operating air pressure   ...   90psi (6.2bar). Average air consumpt. ...