For serious woodturners a geared scroll chuck is the only choice. this high precision 4 jaw chuck uses just one t-bar to adjust the jaws which means mounting a workpiece is very simple & you will not run out of hands. indexed with 24 positions. Standard set fits any lathe with headstock thread 3/4" x 16tpi.. specifications: mounting thread: 3/4" x 16tpi. chuck body diameter: 95mm. standard jaw expands from 45 to 82mm. standard jaw contracts from 69 to 32mm. 24 indexing positions. weight 3kgs. rating: trade.

Includes:: threaded sleeve to convert the chuck for use with any lathe with a 3/4" x 16tpi thread on the headstock.

...

For anybody wanting to tackle large & heavy pieces of wood this 5" diameter precision chuck is the perfect solution. dovetail edged jaws are fitted as standard. the basic chuck is threaded m 33 x 3.5mm, for all other thread sizes an additional insert is required. Supplied with 24 position index plate, locking bar, t-bar, wood screw. Specification: mounting thread: m 33 x 3.5. chuck body diameter: 125mm. standard jaw expands: from 66mm to 115mm. standard jaw contracts: from 96mm to 47mm. indexing positions: 24. weight: 5kg. rating: trade. ...

Features 3 phase variable speed control. camlock toolrest. rotating headstock. solid cast iron bed. drive & tail centre included. floorstand included. outrigger included. free bowl turning attachment worth £149 included. The headstock on this professional level lathe can be positioned anywhere along the bed & rotated to any angle so that a comfortable position can always be found for any job. the headstock, toolrest & tailstock are all made from cast iron & have cam-locking levers for fast adjustment. The lathe is connected to any standard 240volt power supply but an inverter then converts the power to 3 phase to allow a full range of speed control down to 200rpm without losing any torque from the motor. the 3 phase inverter ensures the same amount of power output even when running at low speeds. A digital display gives an accurate speed reading at all times. a pulley change selects the low or high speed range, low is used for heavier workpieces, high for small diameter pieces or finishing. The versatility of this machine is further increased with the addition of a reverse direction selector, 36 position pin indexing, hollow headstock & tailstock suitable for long hole boring & a handle for manual rotation. a cast iron floorstand with four adjustable rubber feet & brackets should you wish to attach a storage shelf completes the package. supplied with four pronged drive centre, revolving tail centre, push button spindle lock, centre knock out bar, floorst&, 355mm toolrest, 150mm diameter faceplate, cable & plug. specifications: distance between centres: 1060mm. distance over bed: 400mm. motor (induction): 1100w, 240v. speeds ranges (rpm): 2 (200-1600rpm & 200-3200rpm). spindle thread
Size: m 33 x 3.5. spindle tapers: 2mt. headstock hollow centre diameter: 15mm. tailstock hollow centre diameter: 10mm. toolrest
Width: 355mm. faceplate diameter: 152mm. headstock rotation: 360 degerees (pre-sets at 45, 90, 135, 180, 270). spindle centre to floor: 1130mm. dimensions (wxdxh): 1790mm x 4400mm x 1170mm. weight: 180kg. rating: trade.

...