cubapro PHAD  4 Torch LED is revolutionary for today’s generation & is quickly becoming the standard in diving torch technology for the future. SCUBAPRO Phad torches use PWM technology Phad torches use a much more advanced eletronic method, using a microprocessor inside the head to control LED. PWM (Pulse Width Modultaion) is controlled by the microprocessor & provides: Perfect battery management, preventing damage by deep discharge. Controls the LEDs at their perfect running current & at their maximum capacity without overload Allows longer burn time because no wasted energy Protects the light head against overheatding & controls the temperature so you can use your dive light underwater & on the surface Incorporates a ‘soft start’ meaning the light is a bit less bright during the first few seconds when turned on, but then it maintains a much longer & brighter burning time compared to resistor LED lights. With PWM technology dimming, strobe & SOS light functions are possible. SCUBAPRO Phad torches have FPH technology FPH is FLOOD PROOF HEAD Technology. SCUBAPRO is the first in the diving market with this fantastic teature! This means, if a diver is changing the batteries, or connecting the umbilical, & drops the head into the water--NO DAMAGE to the HEAD!! Or if a diver accidently opens the head from the body underwater: Again, NO DAMAGE to the Head (only the body will need rinsing & the batteries replaced). FPH makes Phad lights virtually accident proof! Electronics is completly protected LED bulb is completely protected Even bad maintenance of 0-rings cannot harm the light SCUBAPRO Phad torches are modular Phad 4 can also be combined with our Module light battery pack, with each other or with the umbilical cord option for ultimate comfort & convenience. Hook up the head to the umbilical for an easy to manipulate light-weight torch in your hand & keep the heavier battery pack in your pocket. ...

Scubapro PHAD 8 Torch SCUBAPRO Phad torches use PWM technology Phad torches use a much more advanced eletronic method, using a microprocessor inside the head to control LED. PWM (Pulse Width Modultaion) is controlled by the microprocessor & provides: * Perfect battery management, preventing damage by deep discharge. * Controls the LEDs at their perfect running current & at their maximum capacity without overload * Allows longer burn time because no wasted energy * Protects the light head against overheatding & controls the temperature so you can use your dive light underwater & on the surface * Incorporates a ‘soft start’ meaning the light is a bit less bright during the first few seconds when turned on, but then it maintains a much longer & brighter burning time compared to resistor LED lights. * With PWM technology dimming, strobe & SOS light functions are possible. SCUBAPRO Phad torches have FPH technology FPH is FLOOD PROOF HEAD Technology. SCUBAPRO is the first in the diving market with this fantastic teature! This means, if a diver is changing the batteries, or connecting the umbilical, & drops the head into the water--NO DAMAGE to the HEAD!! Or if a diver accidently opens the head from the body underwater: Again, NO DAMAGE to the Head (only the body will need rinsing & the batteries replaced). FPH makes Phad lights virtually accident proof! * Electronics is completly protected * LED bulb is completely protected * Even bad maintenance of 0-rings cannot harm the light SCUBAPRO Phad torches are modular Phad 4 can also be combined with our Module light battery pack, with each other or with the umbilical cord option for ultimate comfort & convenience. Hook up the head to the umbilical for an easy to manipulate light-weight torch in your hand & keep the heavier battery pack in your pocket. ...

Scubapro Pocket Weight Belt The SCUBAPRO Pocket Weight Belt makes all your weight adjustments easy, even when floating at the surface. Simply open the pocket & slide in or take off your weights. Strong black nylon material, anti-slip inner band & soft padding Large self-draining pockets Quick release metal buckle Sizes Sml, Med, Lar, XLar ...

Scubapro Pony Package 1 This package comes with the Scubapro MK2/R295 Scuba Diving Regulator, a pony pressure gauge & a pony bag, together with your 3ltr pony tank. All Pony Packs Come With Regulator Hoses & Jubilee Clips   Beaver 3 ltr 232 bar Cylinder Cylinder comes complete with Beaver Valve Cylinder Weight 4.2kg Valve Weight 0.9kg   Beaver Pony Pressure gauge A miniature yet accurate & robust 350 bar pressure gauge designed to fit directly into the HP port of a pony regulator. This negates the need for a trailing hose & offers all the benefits of an extremely compact unit PONY BAG Heavy duty nylon with adjustable quick release fittings & cord lock closing. Fits most pony cylinders. Scubapro MK2/R295 Regulator A simple & affordable regulator set, ideal for beginners. The Workhorse.  ' Simple Reliability' best describes this combination offered in a very compact design that remains unmatched in today's market.   MK2 First Stage The best example of bulletproof reliability & trouble-free minimum maintenance regulators.  The classic downstream piston configuration is the simplest mechanism that exists to control the pressure drop from a tank to feed the second stage.  The classic downstream valve is the first choice of diving centers & rental facilities worldwide for warm & moderate water temperatures. Classic downstream piston Chrome Plated Brass Body 4 Low Pressure (LP) Ports 1 High Pressure (HP) Port Int (232 bar) or Din (300 bar) fitting Weight  Int
- 706g      Din- 485g Airflow @ 200 bar
- 2600 litres/min   R295 Second Stage Classic Downstream Valve Precision moulded carbon fibre & technopolymer housing Pre tuned system Sturdy super-flow hose with kevlar lining for extra durability & flawless air delivery High flow Left & right hose attachment for extra convenience Weight 167g Airflow @ 200 bar
- 1400 litres /min


...

Beaver 3 ltr 232 bar Cylinder Cylinder comes complete with Beaver Valve Cylinder Weight 4.2kg Valve Weight 0.9kg Pony Cylinder Bag Heavy duty nylon with adjustable quick release fittings & cord lock closing. Fits most pony cylinders. Scubapro Compact Pressure Gauge The same submersible pressure gauge found in the SCUBAPRO Mini VIP 2 Console. 408 bar Submersible Brass Pressure Gauge. Scubapro MK2 R295 Scuba Diving Regulator A simple & affordable regulator set, ideal for beginners. The Workhorse.  ' Simple Reliability' best describes this combination offered in a very compact design that remains unmatched in today's market.   MK2 First Stage The best example of bulletproof reliability & trouble-free minimum maintenance regulators.  The classic downstream piston configuration is the simplest mechanism that exists to control the pressure drop from a tank to feed the second stage.  The classic downstream valve is the first choice of diving centers & rental facilities worldwide for warm & moderate water temperatures. Classic downstream piston Chrome Plated Brass Body 4 Low Pressure (LP) Ports 1 High Pressure (HP) Port Int (232 bar) or Din (300 bar) fitting Weight  Int
- 706g      Din- 485g Airflow @ 200 bar
- 2600 litres/min   R295 Second Stage Classic Downstream Valve Precision moulded carbon fibre & technopolymer housing Pre tuned system Sturdy super-flow hose with kevlar lining for extra durability & flawless air delivery High flow Left & right hose attachment for extra convenience Weight 167g Airflow @ 200 bar
- 1400 litres /min


...

Scubapro Pony Package 4 This package comes with the Scubapro Mk 2/R295 scuba diving regulator, a single pressure gauge, & Clamp together with your 3ltr cylinder. All Pony Packs Come With Regulator Hoses & Jubilee Clips   Beaver 3 ltr 232 bar Cylinder Cylinder comes complete with Beaver Valve Cylinder Weight 4.2kg Valve Weight 0.9kg   Pony Quick Release Stainless Steel Stainless steel quick release pony clamp with positive side locking action. Ideal for pony bottles, Greenforce torches or any umbilical torch.
Features: Rugged construction from 316 stainless steel. Ultra quick detach. Positive locking action. Interchangeable male & female fittings. Female fitting attached to cylinder cam b&. Male fitting attached to pony cylinders with stainless steel jubilee clips Scubapro Compact Pressure Gauge The same submersible pressure gauge found in the SCUBAPRO Mini VIP 2 Console. 408 bar Submersible Brass Pressure Gauge.   Scubapro MK2 R295 Scuba Diving Regulator A simple & affordable regulator set, ideal for beginners. The Workhorse.  ' Simple Reliability' best describes this combination offered in a very compact design that remains unmatched in today's market.   MK2 First Stage The best example of bulletproof reliability & trouble-free minimum maintenance regulators.  The classic downstream piston configuration is the simplest mechanism that exists to control the pressure drop from a tank to feed the second stage.  The classic downstream valve is the first choice of diving centers & rental facilities worldwide for warm & moderate water temperatures. Classic downstream piston Chrome Plated Brass Body 4 Low Pressure (LP) Ports 1 High Pressure (HP) Port Int (232 bar) or Din (300 bar) fitting Weight  Int
- 706g      Din- 485g Airflow @ 200 bar
- 2600 litres/min   R295 Second Stage Classic Downstream Valve Precision moulded carbon fibre & technopolymer housing Pre tuned system Sturdy super-flow hose with kevlar lining for extra durability & flawless air delivery High flow Left & right hose attachment for extra convenience Weight 167g Airflow @ 200 bar
- 1400 litres /min



...

Scubapro Porter Bag A full size dive bag for your entire set of gear Big volume but lightweight back pack bag. 2 integrated wheels let you pull it trolley style. Semi-rigid bottom keeps its shape & supports heavy gear.

Volume: 104ltr Weight: 3.85kg

Size: 57 x 27 x 68cm



...

Scubapro  Profile 0.5mm Ladies Steamer Steamer from Scubapro perfect for tropical waters Durable & fast drying N2S neoprene shorty Back Zipper for great ergonomic look & fit Flatseam construction for comfortable & non-chafing wear Nylon webbing thumb loop at base of all back zippers to get on & off by yourself Integrated Tatex Kneepads Metal main zipper slider Ladies

Sizes: X-Small- X-Large PLEASE ALLOW 5-7 WORKING DAYS FOR THIS ITEM TO BE DELIVERED!!    

...

Scubapro Profile 0.5mm Mens Steamer Steamer from Scubapro perfect for tropical waters Durable & fast drying N2S neoprene shorty Back Zipper for great ergonomic look & fit Flatseam construction for comfortable & non-chafing wear Nylon webbing thumb loop at base of all back zippers to get on & off by yourself Integrated Tatex Kneepads Metal main zipper slider Mens

Sizes: Small- XX-Large PLEASE ALLOW 5-7 WORKING DAYS FOR THIS ITEM TO BE DELIVERED!!    

...

Scubapro Profile 2.5mm Shorty Ladies This lightweight 2.5mm Profile neoprene shorty will soon be your steady companion for all your warm water diving & snorkeling activities. PROFILE SHORTIES Designed & cut for increased comfort, the Profile line suits can be paired in multiple combinations to fit all divers & water environments. Elegantly cut & styled, built in durable & fast drying nylon-2-sided neoprene overall, Profile suits provide maximum comfort at all levels. 2.5mm durable & fast drying N2S neoprene. N2S, nylon-2-sided neoprene, is nylon laminated on both sides of the neoprene foam, the classic material to build all-rounders, rental & tropical water wetsuits.   Back zipper for great ergonomic look & fit.   Flat-seam construction for comfortable & non-chafing wear. Flat seam construction provides a stitching pattern that is the most comfortable against your skin yet still strong & flexible on warm water suits.   Extremely comfortable raw cut collar neck line for unprecedented comfort compared to traditional tight & pulling roll seam collars. Specs

Material: N2S neoprene Thickness: 2.5mm Collar: Raw-Cut collar neck line. Cuff seal: N/A Ankle seal: N/A Zipper: Metal Slider Kneepads: N/A Stitch Type: Flat-Seam construction

...