Fourth Element Subxero 2 Piece Suit The Sub Xero has been developed for use underneath membrane & trilaminate drysuits & all independent testers have rated it as the warmest undersuit they have tried. Windproof, & waterproof. the suit consists of a jacket & salopette or 'farmer john' giving maximum protection to the body core. It will also continue to provide thermal protection if it becomes wet, either by a leak or more fundamental suit failure. The outer material is a trilaminate material comprising a nylon/polyester outer & microfibre inner, bonded to a breathable, but waterproof membrane. The inner material is a 400g shearling fleece, which provides high performance thermal protection & wicks moisture away from the skin. The Sub Xero has been designed with the dive & the surface interval in mind. Practical pockets double as vents during the dive to help prevent air being trapped in the suit, cuffs at the wrists & ankles are adjustable & a large vented patch on the arm has a wind proof backing to prevent windchill when not wearing a drysuit, but allowing air to escape from the auto dump when diving. Pocket Vents The pockets on the jacket & salopettes are zipped for security, but the pocket lining is a mesh, allowing the pockets to be opened to act as vents during the dive. This helps to prevent air becoming trapped & speeds up the process of dumping air from the dry suit. Arm Vents The arm vent is made from a stiff mesh material, ensuring that it will allow easy air release, through the shoulder dump, without interfering with the dump valve. The interior fabric at this point has a windproof lining, which prevents windchill through the arm vent during the surface interval, making the jacket useful in its own right. Removable Crotch Strap The removable crotch strap helps ensure that the jacket remains in place & does not ride up during the dive. The strap is attached with pinch clips & can be easily removed after the dive. Overall Features The Sub Xero is 100% machine washable, but should not be tumble dried. If the suit gets wet during diving without access to a washing machine, the suit can be dried by turning it inside out then rolling the garment from the bottom upwards to remove any excess water, then hanging it to dry. The collar can be turned down to avoid interfering with the neck seal of the drysuit, but in most cases this is not necessary, & the collar provides additional weather protection between dives when not wearing the drysuit. ...

Fourth Element Subxero Undersuit Jacket The Sub X has been developed for use underneath membrane & trilaminate drysuits & all independent testers have rated it as the warmest undersuit they have tried. Windproof, & waterproof. the suit consists of a jacket & salopette or 'farmer john' giving maximum protection to the body core. It will also continue to provide thermal protection if it becomes wet, either by a leak or more fundamental suit failure. The outer material is a trilaminate material comprising a nylon/polyester outer & microfibre inner, bonded to a breathable, but waterproof membrane. The inner material is a 400g shearling fleece, which provides high performance thermal protection & wicks moisture away from the skin. The Sub X has been designed with the dive & the surface interval in mind. Practical pockets double as vents during the dive to help prevent air being trapped in the suit, cuffs at the wrists & ankles are adjustable & a large vented patch on the arm has a wind proof backing to prevent windchill when not wearing a drysuit, but allowing air to escape from the auto dump when diving. Pocket Vents The pockets on the jacket & salopettes are zipped for security, but the pocket lining is a mesh, allowing the pockets to be opened to act as vents during the dive. This helps to prevent air becoming trapped & speeds up the process of dumping air from the dry suit. Arm Vents The arm vent is made from a stiff mesh material, ensuring that it will allow easy air release, through the shoulder dump, without interfering with the dump valve. The interior fabric at this point has a windproof lining, which prevents windchill through the arm vent during the surface interval, making the jacket useful in its own right. Removable Crotch Strap The removable crotch strap helps ensure that the jacket remains in place & does not ride up during the dive. The strap is attached with pinch clips & can be easily removed after the dive. Overall Features The Sub X is 100% machine washable, but should not be tumble dried. If the suit gets wet during diving without access to a washing machine, the suit can be dried by turning it inside out then rolling the garment from the bottom upwards to remove any excess water, then hanging it to dry. The collar can be turned down to avoid interfering with the neck seal of the drysuit, but in most cases this is not necessary, & the collar provides additional weather protection between dives when not wearing the drysuit. ...

Fourth Element Xerotherm 3 Piece Contains: Fourth Element Xerotherm Leggings Fourth Element Xerotherm Top Fourth Element Xerotherm Socks The Xerotherm is the ultimate base layer system for dry suit scuba diving. It can be used either on its own under crushed neoprene or under a Thinsulate to augment a diver's existing thermal protection. Constructed from Polartec Power Stretch fabric which has been used on several Everest expeditions, the Xerotherm is the most effective next to the skin garment for ensuring warmth & comfort in demanding environmental conditions. The Xerotherm is made from the fastest wicking fabric in existence. Moisture is moved away from the skin. Air, which is a far superior insulator, is held at the skins surface. This dramatically reduces conductive heat loss from the body. Worn under membrane suits, as a base layer beneath existing thermal protection, the Xerotherm significantly improves a diver's warmth & comfort. Under crushed neoprene suits the low volume, high thermal performance of the Xerotherm provides outstanding protection without loss of freedom of movement. 1.) High waisted leggings with flat tape ensures no separation of top & leggings. Flat seams are used throughout to maximise next to the skin comfort. 2.) Secure foot pockets ensure leggings stay in place whilst donning a drysuit. On the top, thumb loops prevent sleeves from riding up. 3.) Almost 70% of heat is lost through the head. The xerotherm hat, which is warm even when wet, is ideal pre & post dive thermal protection. 4.) The Xerotherm vest is the perfect accompaniment to a xerotherm for extra protection for the body core. Comfortable & warm, it can make all the difference on a long deco stop. ...

Fourth Element Xerotherm 5 Piece Contains: Fourth Element Xerotherm Leggings Fourth Element Xerotherm Top Fourth Element Xerotherm Socks Fourth Element Xerotherm Vest Fourth Element Xerotherm Hat The Xerotherm is the ultimate base layer system for dry suit scuba diving. It can be used either on its own under crushed neoprene or under a Thinsulate to augment a diver's existing thermal protection. Constructed from Polartec Power Stretch fabric which has been used on several Everest expeditions, the Xerotherm is the most effective next to the skin garment for ensuring warmth & comfort in demanding environmental conditions. The Xerotherm is made from the fastest wicking fabric in existence. Moisture is moved away from the skin. Air, which is a far superior insulator, is held at the skins surface. This dramatically reduces conductive heat loss from the body. Worn under membrane suits, as a base layer beneath existing thermal protection, the Xerotherm significantly improves a diver's warmth & comfort. Under crushed neoprene suits the low volume, high thermal performance of the Xerotherm provides outstanding protection without loss of freedom of movement. 1.) High waisted leggings with flat tape ensures no separation of top & leggings. Flat seams are used throughout to maximise next to the skin comfort. 2.) Secure foot pockets ensure leggings stay in place whilst donning a drysuit. On the top, thumb loops prevent sleeves from riding up. 3.) Almost 70% of heat is lost through the head. The xerotherm hat, which is warm even when wet, is ideal pre & post dive thermal protection. 4.) The Xerotherm vest is the perfect accompaniment to a xerotherm for extra protection for the body core. Comfortable & warm, it can make all the difference on a long deco stop. ...

Fourth Element Xerotherm Hat Constructed from Polartec Power Stretch fabric which has been used on several Everest expeditions, the Xerotherm is the most effective next to the skin garment for ensuring warmth & comfort in demanding environmental conditions. The Xerotherm is made from the fastest wicking fabric in existence. Moisture is moved away from the skin. Air, which is a far superior insulator, is held at the skins surface. This dramatically reduces conductive heat loss from the body.   ...

  Fourth Element Xerotherm Socks  The Xerotherm is the ultimate base layer system for dry suit scuba diving. It can be used either on its own under crushed neoprene or under a Thinsulate to augment a diver's existing thermal protection. Constructed from Polartec Power Stretch fabric which has been used on several Everest expeditions, the Xerotherm is the most effective next to the skin garment for ensuring warmth & comfort in demanding environmental conditions. The Xerotherm is made from the fastest wicking fabric in existence. Moisture is moved away from the skin. Air, which is a far superior insulator, is held at the skins surface. This dramatically reduces conductive heat loss from the body. Worn under membrane suits, as a base layer beneath existing thermal protection, the Xerotherm significantly improves a diver's warmth & comfort. Under crushed neoprene suits the low volume, high thermal performance of the Xerotherm provides outstanding protection without loss of freedom of movement. ...

Fourth Element Xerotherm Top The Xerotherm is the ultimate base layer system for dry suit scuba diving. It can be used either on its own under crushed neoprene or under a Thinsulate to augment a diver's existing thermal protection. Constructed from Polartec Power Stretch fabric which has been used on several Everest expeditions, the Xerotherm is the most effective next to the skin garment for ensuring warmth & comfort in demanding environmental conditions. The Xerotherm is made from the fastest wicking fabric in existence. Moisture is moved away from the skin. Air, which is a far superior insulator, is held at the skins surface. This dramatically reduces conductive heat loss from the body. Worn under membrane suits, as a base layer beneath existing thermal protection, the Xerotherm significantly improves a diver's warmth & comfort. Under crushed neoprene suits the low volume, high thermal performance of the Xerotherm provides outstanding protection without loss of freedom of movement. The Xerotherm vest is the perfect accompaniment to a xerotherm for extra protection for the body core. Comfortable & warm, it can make all the difference on a long deco stop. ...

Fourth Element Xerotherm Vest The Xerotherm is the ultimate base layer system for dry suit scuba diving. It can be used either on its own under crushed neoprene or under a Thinsulate to augment a diver's existing thermal protection. Constructed from Polartec Power Stretch fabric which has been used on several Everest expeditions, the Xerotherm is the most effective next to the skin garment for ensuring warmth & comfort in demanding environmental conditions. The Xerotherm is made from the fastest wicking fabric in existence. Moisture is moved away from the skin. Air, which is a far superior insulator, is held at the skins surface. This dramatically reduces conductive heat loss from the body. Worn under membrane suits, as a base layer beneath existing thermal protection, the Xerotherm significantly improves a diver's warmth & comfort. Under crushed neoprene suits the low volume, high thermal performance of the Xerotherm provides outstanding protection without loss of freedom of movement. ...

  Faber 10 ltr 232 bar Cylinder All tanks are £10 P+P PER TANK (UK Mainland)
- We will call you for any extra postage to be paid.
...

Faber 10 ltr 232 bar Twin Set W/SS Bands & Isolation Manifold Twin sets are heavy in anybodys money but our twin sets are assembled using Faber Lightweight steel cylinders to help reduce the load. The manifolds are suitable for O2 sevice & Din convertible & the twinning bands are the best you can buy. Finaly the whole assembly stands on black rubber cylinder boots. Everything you need to assemble a twin set Postage to UK mainland  £12 ...