Apeks Stainless Steel Back Plate The backbone of any system
- this cleverly designed back plate can be used with the webbed
...

Apeks Sure Lock Weight System This popular accessory is ideal when it becomes necessary to add additional weight to your rig. Bolts directly to the WTX Harness Able to mount to the back plate with use of Sure Lock™ attachments (below)

Includes:: necessary attachment hardware plus spares. 2” stainless adjustable D-rings on the outside of each pocket. Features the Sure Lock™ (patent pending) mechanical weight release buckles Prevents weights from releasing until you want them to Each pocket holds up to 10 lbs (4.5kg) of lead

Includes:: attachment grommets to mount your choice of Deep See knives



...

Apeks Swivel Inflation Valve Apeks rubust & totally reliable inflation valve features an extra large recessed push-button allowing easy operation. The smooth backplate gives protection from uncomfortable pressure loads & prevents cold air blasts through underclothing. The valve sits low on the chest making it less prone to snagging. Rotation is a key feature of this valve to meet the diver's personal hose configuration. The valve is deigned to rotate 360 degrees for flexibility & to assist suit manufacturers in fitting valves. Connected to your 1st stage via a 3/8" UNF male coupling, this valve represents the ultimate in dry suit inflation. ...

Apeks Sure Lock™ Attachments This unique accessory means that you can mount the Sure Lock™ Weight System directly to the back plate.

Includes:: necessary attachment hardware plus spares. May be used without the Sure Lock™ Weight System to spread the weight of the cylinders over the hips 3 different grommets settings allow for proper positioning of the Sure Lock™ weight pockets.

...

Apeks WTX Harness This is our most versatile harness. Solid construction coupled with durable materials make this harness a cornerstone for many applications   Can mount directly to a single cylinder using dual nylon cylinder bands. Can accept an Apeks back plate for heavy loads such as twin steel cylinders. Multiple grommet settings on the waistband allow the attachment of the Sure Lock™ weight system. Open shoulder design allows diver to add or remove hardware for total customization. Made from rugged 1000D Armorshield Cordura. Removable crotch strap made from 2” webbing. 6-two inch stainless steel D-rings (2, angled, on shoulders, 2 on the hips & 2 on the crotch strap) 6-one inch stainless steel D-rings along the sides accommodate light canisters, argon bottles or other accessories. 2-one inch stainless steel D-rings along the lower back are for marker buoys, reels or other accessories Removable back pad Heavy duty waist buckle Stainless steel triloaders distribute the load between the back, waist & shoulders SOLAS reflector airway hold-downs can be removed or repositioned. Chest strap comes standard.   BC SIZE GUIDE measured in inches.  WTX Harness Only size Medium waist range 29-60" size Large waist range 32-60" size Extra Large waist range 34-60" Measured in inches from the centre of the waistband front to centre of the tank band back at the smallest setting
- size Medium over the shoulder 36", size Large over the shoulder 40", size Extra Large over the shoulder 42"
- all additional adjustments 9". WTX Harness with surelock attachments size Medium waist range 33-60" size Large waist range 36-60" size Extra Large waist range 38-60"

...

Apeks WTX3 Buoyancy Cell This single cylinder buoyancy cell can mate to the WTX Harness or directly to the back plate. Gussets along each side allow for a full 32 lbs of lift without compromising the overall size of the WTX3. 4 slots allow it to be mounted to a WTX harness or back plate using & upper & lower nylon cylinder bands. 2 pairs of grommets allow the WTX3 to be bolted on if a single cylinder mounting kit is used. A 2” wide restriction band at the bottom of the WTX3 allows the cylinder to nestle into the inflated buoyancy cell so it doesn’t get pushed away from your body. A 2” D-ring on the restrictor band is a convenient place to add accessories like a surface marker buoy. The airway comes off the top back center of the cell. A safety cable inside the elliptical hose prevents hyperextension of the corrugated hose. Features the Apeks technical inflator with brass buttons

Includes:: front, lower left pull dump Constructed from durable 840-denier nylon. 1.26kg dry weight

...

Apeks WTX4 Buoyancy Cell This is a new buoyancy cell in the WTX Series of floatation products. The WTX4 is a smaller version of the WTX6 & WTX8 but it can accept single cylinders too! The WTX4 can mate directly to the WTX harness or the stainless steel back plate using twin tank bands or using center bolts Highly efficient drains allow water to empty quickly after a dive Outer bag constructed out of Armorshield™ Cordura ...

Apeks WTX6 Buoyancy Cells This twin cylinder buoyancy cell provides 60 lbs of lift.   Outer bag constructed out of Armorshield™ Cordura to resist abrasion & fading. Inner bag constructed from mil-spec welded fabric. This is the same fabric used in survival vests worn by US fighter pilots. Inner bladder protected from zipper with V-diamond rubber. Pull dump on inside lower left Optional pull dump may be added to inside lower right Highly efficient drains empty water quickly after the dive. 3 upper grommets allow various height settings coupled with a lower slot that compensates for misaligned band bolts. The airway comes off the top back center of the cell A safety cable inside the elliptical hose prevents hyperextension of the corrugated hose. Features the Apeks technical inflator with brass buttons 1.66kg dry weight ...