19mm x 235mm Auger Bit ...

19mm x 450mm Auger Bit ...

1.35m Steel Sitework Fence Pins (Lamp Irons) ...

A 1.35m long 100mm wide by 100mm thick post with a V-cut recessed end for a 75mm x 75mm or a 100mm x 100mm post to be slotted in as a rail. Also known as
- Knee, Ascot & Diamond rail fencing 75mm x 75mm or 100mm x 100mm posts are used as rails with a usual spacing of 2.4m between posts Fix the rails to the posts with  Birds Mouth Metal Strip Pressure treated to UC4* Colour of the timber may vary from illustration *UC4 grade treatment has a life expectancy of 15 years. This is not a guarantee.
...

All our ground contact timber products are treated to Use Class 4 to meet standards EN335-1 & BS8417. The Pine softwood is air dried or kiln dried to a moisture content of 28% or below before they are pressure treated.  All products treated to UC4 should achieve a 15 year life expectancy. Machine Half Round Post
- Pressure Treated
- Pointed
- Chamfered Top


...

A 1.8m long 150mm wide by 75mm thick post with 3 rectangular holes through the wider face of the timber. Traditional style post & rail fencing The post are installed at 2.85mtr centres 1 or 2 intermediate posts are positioned between the Morticed Posts Pressure treated to UC4* Colour of the timber may vary from illustration *UC4 grade treatment has a life expectancy of 15 years. This is not a guarantee. ...

A 1.8m long, 50mm by 50mm square timber post. Used by domestics & landscapers for light duty requirements, the smaller variants of the 48mm x 48mm are often used as stakes for sleepers & gravel boards. Pointed to make installation easier, also available in 48mm x 48mm variants in the following lengths
- 0.45m, 0.6m,  1.2m & 1.5m. Rough sawn finish Pointed end for ease of installation Straight cut edges Pressure treated green to UC3 Colour & point of timber may vary from illustration. Price per unit (sold individually)
...

An adjustable spanner, also known as a crescent wrench or adjustable wrench, that used to tighten or loosen nuts & bolts. It has a jaw that can be adjusted to fit the size of the nut or bolt being worked on, up to a 32mm. This spanner is heavy duty & 10" (250mm) long, which can be useful for reaching fasteners that are in hard to reach places. Adjustable spanners are a versatile tool that can be used in a variety of situations, from simple household repairs to complex mechanical work. Made from high quality carbon steel. Drop forged for durability. Chrome plated finish. 10" (250mm) long. Adjustable up to 32mm. ...

The 1.8m long machined half round rail at 100mm wide can be used as a fencing rail (like the 87mm x 38mm rails) with a flat side to go against the posts & a machined round face in the shape of a half moon. The rail comes in at 100mm wide & 50mm high (to the top of the curve in the rounded face) & has flat ends to continue the rail. Preserved with a pressure treatment (green) the rail can withstand some of the elements for some time, however there is no guarantee on how long they will last if left exposed without any maintenance. Pressure treated green Machine round surface with a flat side 100mm diameter along widest edge Also comes in lengths of 3.0m & 3.66m A 1.8m long machined half round rail at 100mm wide which has a machined rounded face, a flat side to sit against a post to create a railed fence & flat ends to continue the rail. ...

The 1.8m long machined half round rail at 100mm wide can be used as a fencing rail (like the 87mm x 38mm rails) with a flat side to go against the posts & a machined round face in the shape of a half moon. The rail comes in at 100mm wide & 50mm high (to the top of the curve in the rounded face) & has flat ends to continue the rail. Preserved with a pressure treatment (green) the rail can withstand some of the elements for some time, however there is no guarantee on how long they will last if left exposed without any maintenance. Pressure treated green Machine round surface with a flat side 100mm diameter along widest edge Also comes in lengths of 3.0m & 3.66m A 1.8m long machined half round rail at 100mm wide which has a machined rounded face, a flat side to sit against a post to create a railed fence & flat ends to continue the rail. ...