Aero shaped wedge pack with easy-to-use quick release mounting system. Large openings swallow up all the things you take with you. Gussets hold the rear flap in place when open. Hard wearing fabric.

Features: Expanding design on M & L models for extra capacity • Built-in pump holder on M & L models• Tail light strap included•1000 Denier Teflon coated fabric•3M Scotchlite reflective safety strip

...

Aero shaped wedge pack with easy-to-use quick release or strap mounting system. 1000 Denier Teflon coated fabric 3M Scotchlite reflective strip Expanding design (M L) Built-in pump holder (M L) Tail light strap Large: 11.4x 21.6x 14cm 1.48-1.97L 176g ...

Aero shaped wedge pack with easy-to-use quick release or strap mounting system. 1000 Denier Teflon coated fabric 3M Scotchlite reflective strip Expanding design (M L) Built-in pump holder (M L) Tail light strap Medium: 9.6x 20.3x 12.7cm 0.98-1.31L 135g ...

Aero shaped wedge pack with easy-to-use quick release or strap mounting system. 1000 Denier Teflon coated fabric 3M Scotchlite reflective strip Tail light strap Small: 7.1x 17.8x 10.9cm 0.66L 105g ...

Aero shaped wedge pack with positive locking QR buckle & high strength straps. Large openings swallow up all the things you take with you. Gussets hold the rear flap in place when open. Hard wearing fabric.

Features: Expanding design on M & L models for extra capacity• Tail light strap included•1000 Denier Teflon coated fabric•3M Scotchlite reflective safety strip

...

Air Booster CO2 inflator in a compact race ready pod. Attaches conveniently on the seatpost keeping your inflator CO2 canister & tyre levers organised & easily accessible.
Includes::• Air Booster Inflator•2 x engineering grade plastic/stainless steel tyre levers•2 x threaded 16g CO2 cartridges• Module with multiple compartments & mounting strap• Features integrated dust cap.•12x 6.3x 5.5cm•228g
...

Fenders that are there when you need them & quickly gone when you don’t! These clever fenders stow neatly in hydration pack or wedge bag until needed. Then a few pump strokes is all it takes to inflate the fender protecting you from mud & road spray. Once skies clear the Air Fender™ Front & Rear deflate roll up & clip compactly for easy storage. Multiple pivots on the Rear are easily adjustable allowing for optimum tire clearance on virtually any bike. Handy quick release makes installation & removal a snap. • Added Features
- Dual density molding rolls up for compact storage • Size
- 60 x 8 x 6.5cm (L x W x H)• Material
- TPU & Injected Molded Nylon • Inflation Pressure
- 10 psi / 0.7 bar (maximum) blow off valve protected • Head
- Schrader Valve • Attachment (Rear)
- QR Seat Tube Attachment Slip Joint Clamp fits ø25.4 ~ ø34.9 mm seatpost • Adjustable
- Rear Angle Adjustable • Weight
- 150g







...

Compact ergonomic & lightweight. Air Booster fits comfortably in your h&. Fits Presta & Schrader valves.• Accepts all threaded CO2 cartridges.•CNC Aluminium construction•CO2 cartridge is not included• Features integrated dust cap.•4.4x 3.7x 1.5cm•22g ...

*CO2 cartridges not included* The world’s first CO2 inflator with tire gauge provides tire inflation & tire pressure measurement. The angled head fits Presta & Schrader valves & a special feature allows the user to adjust the flow while filling the tire. Dual end design allows for cartridge storage. Works as a CO2 inflator & tire pressure measurement gauge at the same time Works as a tire pressure measurement gauge Included reusable Rubber Spacer is for storing CO2 cartridges HEAD Presta / Schrader with integrated dust cap Push to inflate GAUGE Reads 160 psi / 11 bar 1-1/2” analog MATERIAL Engineering grade polymer SIZE 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” WEIGHT 45 g / 1.59 oz ADDED FEATURE Dual end design allows cartridge storage for 1 threaded 16g / 25g CO2 cartridge ...

*CO2 cartridges not included* An extremely compact lightweight & easy-to-use CO2 inflator. Precision CNC machined aluminum inflator fits Presta & Schrader valves & works with threaded 16g or 25g cartridges. Simply screw the cartridge in tight & then screw the head onto the valve unscrew the cartridge to release all the gas from the CO2 cartridge in seconds. * Use only Topeak CO2 cartridges INFLATION Fits Presta & Schrader valves. Works with threaded 16g or 25g cartridges DUAL FUNCTION USE WITH INSERTION TOOL Repair & inflate tubeless tires in one quick step (Plug Insertion Tool Kit available separately) FOR PRESTA VALVE 1. Thread in CO2 Cartridge 2. Loosen valve core before inflation 3. Start & regulate CO2 flow by 1/2 turn to release CO24. Stop the CO2 flow by tightening the CO2 cartridge into Nano Air Booster FOR SCHRADER VALVE 1. Install & thread inflation head onto Schrader valve 2. Thread in CO2 cartridge 3. Start & regulate CO2 flow by 1/2 turn to release CO24. Stop the CO2 flow by tightening the CO2 cartridge into Nano Air Booster WEIGHT 8.2 g / 0.29 oz SIZE 2.8 x 1.5 x 1.5 cm / 1.1” x 0.59” x 0.59” MATERIAL CNC aluminum HEAD Presta / Schrader valves ...