We started from the ground up to create what we believe is the finest folding stand available. Lightweight stable & packed with features 100-25D Professional Micro Adjust Clamp quickly clamps & releases nearly any tube from 7/8 inches to 3 inches (23-76 mm) including aero tubes Fully adjustable clamping pressure Narrow clamping jaws (2.7 inches / 7 cm) fit into tight areas or on short seat posts 360 degree clamp rotation Soft durable composite rubberclamping pads Saddle cradle provides a perfect spot to temporarily rest a bike by its saddle Three-point leg system creates a stable base on smooth or rough surfaces Quickly & easily folds to 47 inches Clamping height adjusts up to 60 inches Proprietary Hexatude hex-shaped aluminium tubing ensures low flex & no rotation Aluminium leg straps ensure all parts slide fold & unfold together Weighs just 13 pounds (6 kg) ...

Park Tool PRS4W
- Deluxe wall-mount repair stand with 100-3D clamp Top quality wall Mounted Repair Stand ...

Shop quality preset torque driver that limits torque applied to fasteners preventing overtightening & damage to lightweight components Each tool preset to apply either 45 or 6 Newton Meter (Nm) of torque when rotating clockwise depending on model purchased All metal internal construction for long life Comfortable ergonomic composite molded grip

Includes:: 3mm 4mm 5mm & T25 bits (stored in handle) 1 1/4 inch drive Magnetic socket retains bits Assembled & calibrated at the PARK TOOL factory in St. Paul Minnesota

...

A compact & value for your money 15mm pedal spanner. No need to struggle with the wrong size spanner or bashed knuckles ...

The QTH-1 is an ergonomic T-handled bit driver equipped with eight common bits to fit a wide variety of fasteners & fittings found on bicycles. The magnetic quick-change handle allows for one-handed operation & makes changing bits quick & easy. The bit holder can be magnetically attached to any magnetic surface such as a repair stand or tool box or can be permanently mounted to any wall or tool board. The QTH-1 is a professional-grade tool built to withstand the rigors of daily shop use & is fully rebuildable.

Includes:: the following magnetic 1/4 bits: 2mm 2.5mm 3mm 4mm 5mm & 6mm hex T25 Torx-compatible 2 Philips cross tip Bit holder

Includes:: empty spaces for 2 extra bits



...

The RTP-1 combines two ride-saving tools the MTB-5 Multi-Tool & TPT-1 Tubeless Tire Plug Tool into one ultra-portable package. The included tool holder securely holds both tools without adding excess weight & can be mounted or strapped to most bike frames. The MTB-5 packs 16 functions into one slim tough folding multi-tool making it the ideal companion for any trailside adjustment or emergency fix that features a full set of hex wrenches & screwdrivers a T25 Torx-compatible driver & five specialty tools to aid in common on-the-ride repairs The TPT-1 is a handy carry-along tool for repairing small punctures & cuts in tubeless bicycle tyres without removing the tyre from the rim getting you back on the trail in no time The TPT-1 easily plugs the hole by inserting one of the 5 included vulcanized rubber plugs into the puncture. This shrinks the puncture down to a manageable size allowing the tubeless sealant to do its job & re-establish a seal. Note: The MTB-5 will not peen Campagnolo 11 12 or 13-speed chain rivets ...

Creates a tighter grip between surfaces reducing the amount of clamping force needed to safely secure a component Ideal for carbon or lightweight alloy handlebars stems & seatposts With more & more manufacturers specifying that assembly compound be used when assembling their components make sure that you are not invalidating your warranty An essential addition to any modern mechanics workbench Not for use on threaded surfaces ...

Cut any threaded fork steerer quickly & accurately with this handy saw guide You can easily remove as little as 1 mm from the fork steerer length for perfect headset installation & adjustment Heat treated for long life Freshly cut threads are cleaned upon removal so threaded headset parts install easily Suitable for 1-1/8 inch threaded or non threaded steerer tubes ...

The SBS-1 is a complete shop quality set of the most common 3/8 inch drive Chrome Vanadium sockets hex bits & Torx style bits Suitable for use with Park Tool torque wrenches for setting all component fastenings to the specified level The set

Includes:: a convenient holder & the following tools Sockets: 8 9 10 11 12 13 14 15 mm & 1 inch (fits various Park Tool Freewheel lockring & bottom bracket tools) Hex bits: 3 4 5 6 8 & 10 mm Torx style bits: T25 T30 & T40

...

The standard chain tool for workshop & professional use Made from investment cast steel for strength & durability Fine thread & large T-handle gives high leverage&44; & means easy removal of chain rivets
Includes: a loosening shelf to release stiff links after assembly Replaceable driving pin head Works on most bicycle chains&44; including 10-speed
...